[PATCH] usb: serial: add support for Rolling Wireless RW135R-GL (33f8:1003)

[PATCH] usb: serial: add support for Rolling Wireless RW135R-GL (33f8:1003)

[zwq2226404116]

From: Wanquan Zhong <wanquan.zhong@fibocom.com>

Add VID/PID 33f8:1003 for the Rolling Wireless RW135R-GL M.2 module,
which is used in laptop debug cards with MBIM interface for
Linux/Chrome OS. The device supports mbim, diag, adb and AT command
functionalities.

Here are the outputs of usb-devices:
T:  Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=1003 Rev=05.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling RW135R-GL Module
S:  SerialNumber=12345678
C:  #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e349ed66d2ac..abeeb7c66977 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2449,6 +2449,9 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff),			/* Rolling RW135-GL (laptop MBIM) */
 	  .driver_info = RSVD(5) },
+	/* Rolling RW135R-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff),
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff),			/* Rolling RW101-GL (laptop MBIM) */
-- 
2.43.0

Re: [PATCH] usb: serial: add support for Rolling Wireless RW135R-GL (33f8:1003)

[Johan Hovold]

On Fri, Mar 13, 2026 at 10:36:05AM +0800, zwq2226404116@163.com wrote:
> From: Wanquan Zhong <wanquan.zhong@fibocom.com>
> 
> Add VID/PID 33f8:1003 for the Rolling Wireless RW135R-GL M.2 module,
> which is used in laptop debug cards with MBIM interface for
> Linux/Chrome OS. The device supports mbim, diag, adb and AT command
> functionalities.
> 
> Here are the outputs of usb-devices:
> T:  Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=33f8 ProdID=1003 Rev=05.15
> S:  Manufacturer=Rolling Wireless S.a.r.l.
> S:  Product=Rolling RW135R-GL Module
> S:  SerialNumber=12345678
> C:  #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
> E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Can you include the other configurations as well? This one only as three
interfaces, which doesn't explain why you need to blacklist interface 5
(or which interfaces handle diag, adb, etc).

A few more comments below.

> Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
> ---

This is an updated patch which should be reflected in the patch summary
(Subject) (e.g. "[PATCH v2]: USB: ...").

Also include a short changelog here under the --- line when sending
updated patches.

>  drivers/usb/serial/option.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e349ed66d2ac..abeeb7c66977 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -2449,6 +2449,9 @@ static const struct usb_device_id option_ids[] = {
>  	  .driver_info = RSVD(4) | RSVD(5) },
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff),			/* Rolling RW135-GL (laptop MBIM) */
>  	  .driver_info = RSVD(5) },
> +	/* Rolling RW135R-GL (laptop MBIM) */
> +	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff),
> +	  .driver_info = RSVD(5) },

Looks like you missed my comments about this entry not being in VID/PID
sort order, and that the comment should go after the entry (like the
other entries).

>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
>  	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff),			/* Rolling RW101-GL (laptop MBIM) */

Johan