Re: [PATCH v3 1/2] dt-bindings: hwmon: moortec,mr75203: adapt multipleOf for T-Head TH1520

[Drew Fustini <fustini@kernel.org>]

On Mon, Mar 16, 2026 at 07:11:37AM -0700, Guenter Roeck wrote:
> On 3/15/26 05:12, Conor Dooley wrote:
> > On Sat, Mar 14, 2026 at 09:56:27AM -0700, Drew Fustini wrote:
> > > On Tue, Mar 10, 2026 at 12:24:56AM +0800, Icenowy Zheng wrote:
> > > > The G and J coefficients provided by T-Head TH1520 manual (which calls
> > > > them A and C coefficients and calls H coefficient in the binding as B)
> > > > have 1/100 degree Celsius precision (the values are 42.74 and -0.16
> > > > respectively), however the binding currently only allows coefficients as
> > > > precise as 100 milli-Celsius (1/10 degree Celsius).
> > > > 
> > > > Change the multipleOf value of these two coefficients to 10 (in the unit
> > > > of milli-Celsius) to satisfy the need of TH1520.
> > > > 
> > > > Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
> > > > Reviewed-by: Drew Fustini <fustini@kernel.org>
> > > > ---
> > > > Changes in v3:
> > > > - Added Drew's R-b.
> > > > - Fixed some typos in the commit message and slightly reworded the
> > > >    precision sentence.
> > > > 
> > > >   Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 4 ++--
> > > >   1 file changed, 2 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > > index 56db2292f062d..7d57c2934a8a1 100644
> > > > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > > @@ -105,7 +105,7 @@ properties:
> > > >         G coefficient for temperature equation.
> > > >         Default for series 5 = 60000
> > > >         Default for series 6 = 57400
> > > > -    multipleOf: 100
> > > > +    multipleOf: 10
> > > >       minimum: 1000
> > > >       $ref: /schemas/types.yaml#/definitions/uint32
> > > > @@ -131,7 +131,7 @@ properties:
> > > >         J coefficient for temperature equation.
> > > >         Default for series 5 = -100
> > > >         Default for series 6 = 0
> > > > -    multipleOf: 100
> > > > +    multipleOf: 10
> > > >       maximum: 0
> > > >       $ref: /schemas/types.yaml#/definitions/int32
> > > > -- 
> > > > 2.52.0
> > > > 
> > > 
> > > I have applied this to thead-dt-for-next.
> > 
> > That's odd, why is a hwmon binding in your branch?
> > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux.git/commit/?h=thead-dt-for-next&id=eb4fd43ff6793681f0a0a8e8ac861142caba2b19
> > 
> > I don't see an ack on it from the relevant maintainer either?
> 
> I don't get it either. Normally I am the one to apply hwmon bindings
> through the hwmon branch.

Sorry, I should not have done this. I should only be applying dts/dtsi
patches to my thead dt branch.

Thanks,
Drew