[PATCH v5 0/4] Add USB support for Canaan K230

[PATCH v5 0/4] Add USB support for Canaan K230

[Jiayu Du]

Add support for the USB PHY and DWC2 IP which is used by Canaan K230,
and made relevant changes to the DTS.

This series is based on the initial 100ask K230 DshanPi series [1] which
is based on the clock and pinctrl series. Check the details in the link.

Link: https://lore.kernel.org/all/20260115060801.16819-1-jiayu.riscv@isrc.iscas.ac.cn/ [1]

Changes in v5:
- Changed the year of Copyright to 2026.
- Add blank line after the declaration of variables
- Fix wrong alignment.
- Link to v4: https://lore.kernel.org/all/20260120143243.71937-1-jiayu.riscv@isrc.iscas.ac.cn/

Changes in v4:
- Shrink reg length to match the address/size-cells in k230-usb-phy yaml.
- Move all PHY instance creation and initialization from xlate to probe.
- Modify xlate function to only perform index lookup for PHY instances.
- Define all register base offsets macros at the top of file instead of
  hard-coding magic numbers directly in probe.
- Link to v2: https://lore.kernel.org/all/20260115064223.21926-1-jiayu.riscv@isrc.iscas.ac.cn/

Changes in v3:
- Please ignore v3.

Changes in v2:
- Fold the child into the parent in dtsi.
- Define one usbphy with phy-cells=1.
- Delete the clock of the usbphy as it is not needed.
- Link to v1: https://lore.kernel.org/all/20251230023725.15966-1-jiayu.riscv@isrc.iscas.ac.cn/

Jiayu Du (4):
  dt-bindings: phy: Add Canaan K230 USB PHY
  dt-bindings: usb: dwc2: Add support for Canaan K230 SoC
  phy: usb: Add driver for Canaan K230 USB 2.0 PHY
  riscv: dts: canaan: Add syscon and USB nodes for K230

 .../bindings/phy/canaan,k230-usb-phy.yaml     |  35 +++
 .../devicetree/bindings/usb/dwc2.yaml         |   3 +
 .../boot/dts/canaan/k230-canmv-dshanpi.dts    |  17 ++
 arch/riscv/boot/dts/canaan/k230.dtsi          |  35 +++
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/canaan/Kconfig                    |  14 +
 drivers/phy/canaan/Makefile                   |   2 +
 drivers/phy/canaan/phy-k230-usb.c             | 284 ++++++++++++++++++
 9 files changed, 392 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml
 create mode 100644 drivers/phy/canaan/Kconfig
 create mode 100644 drivers/phy/canaan/Makefile
 create mode 100644 drivers/phy/canaan/phy-k230-usb.c

-- 
2.52.0

[PATCH v5 1/4] dt-bindings: phy: Add Canaan K230 USB PHY

[Jiayu Du]

K230 SoC USB PHY requires configuring registers for control and
configuration. Add USB phy bindings for K230 SoC.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
---
 .../bindings/phy/canaan,k230-usb-phy.yaml     | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml b/Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml
new file mode 100644
index 000000000000..b959b381c44c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/canaan,k230-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K230 USB2.0 PHY
+
+maintainers:
+  - Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
+
+properties:
+  compatible:
+    const: canaan,k230-usb-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usbphy: usb-phy@91585000 {
+        compatible = "canaan,k230-usb-phy";
+        reg = <0x91585000 0x400>;
+        #phy-cells = <1>;
+    };
-- 
2.52.0

[PATCH v5 2/4] dt-bindings: usb: dwc2: Add support for Canaan K230 SoC

[Jiayu Du]

Add 'canaan,k230-usb' compatible string with 'snps,dwc2' as fallback
for the DWC2 IP which is used by Canaan K230.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
---
 Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 6c3a10991b8b..352487c6392a 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -17,6 +17,9 @@ properties:
   compatible:
     oneOf:
       - const: brcm,bcm2835-usb
+      - items:
+          - const: canaan,k230-usb
+          - const: snps,dwc2
       - const: hisilicon,hi6220-usb
       - const: ingenic,jz4775-otg
       - const: ingenic,jz4780-otg
-- 
2.52.0

[PATCH v5 3/4] phy: usb: Add driver for Canaan K230 USB 2.0 PHY

[Jiayu Du]

Add driver for the USB 2.0 PHY in Canaan K230 SoC, which supports PHY
initialization and power management.

Add Kconfig/Makefile under drivers/phy/canaan/.

Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
---
 drivers/phy/Kconfig               |   1 +
 drivers/phy/Makefile              |   1 +
 drivers/phy/canaan/Kconfig        |  14 ++
 drivers/phy/canaan/Makefile       |   2 +
 drivers/phy/canaan/phy-k230-usb.c | 284 ++++++++++++++++++++++++++++++
 5 files changed, 302 insertions(+)
 create mode 100644 drivers/phy/canaan/Kconfig
 create mode 100644 drivers/phy/canaan/Makefile
 create mode 100644 drivers/phy/canaan/phy-k230-usb.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 142e7b0ef2ef..e37bcceef65a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -150,6 +150,7 @@ source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/apple/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
+source "drivers/phy/canaan/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
 source "drivers/phy/ingenic/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index dcbb060c8207..8cef0a447986 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -22,6 +22,7 @@ obj-y					+= allwinner/	\
 					   apple/	\
 					   broadcom/	\
 					   cadence/	\
+					   canaan/	\
 					   freescale/	\
 					   hisilicon/	\
 					   ingenic/	\
diff --git a/drivers/phy/canaan/Kconfig b/drivers/phy/canaan/Kconfig
new file mode 100644
index 000000000000..1ff8831846d5
--- /dev/null
+++ b/drivers/phy/canaan/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Canaan platforms
+#
+config PHY_CANAAN_USB
+	tristate "Canaan USB2 PHY Driver"
+	depends on (ARCH_CANAAN || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	help
+	Enable this driver to support the USB 2.0 PHY controller
+	on Canaan K230 RISC-V SoCs. This PHY controller
+	provides physical layer functionality for USB 2.0 devices.
+	If you have a Canaan K230 board and need USB 2.0 support,
+	say Y or M here.
diff --git a/drivers/phy/canaan/Makefile b/drivers/phy/canaan/Makefile
new file mode 100644
index 000000000000..d73857ba284e
--- /dev/null
+++ b/drivers/phy/canaan/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_CANAAN_USB)		+= phy-k230-usb.o
diff --git a/drivers/phy/canaan/phy-k230-usb.c b/drivers/phy/canaan/phy-k230-usb.c
new file mode 100644
index 000000000000..52dad35fc6cf
--- /dev/null
+++ b/drivers/phy/canaan/phy-k230-usb.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Canaan usb PHY driver
+ *
+ * Copyright (C) 2026 Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define MAX_PHYS		2
+
+/* Register offsets within the HiSysConfig system controller */
+#define K230_USB0_TEST_REG_BASE     0x70
+#define K230_USB0_CTL_REG_BASE      0xb0
+#define K230_USB1_TEST_REG_BASE     0x90
+#define K230_USB1_CTL_REG_BASE      0xb8
+
+/* Relative offsets within each PHY's control/test block */
+#define CTL0_OFFSET		0x00
+#define CTL1_OFFSET		0x04
+#define TEST_CTL3_OFFSET	0x0c
+
+/* Bit definitions for TEST_CTL3 */
+#define USB_IDPULLUP0		BIT(4)
+#define USB_DMPULLDOWN0		BIT(8)
+#define USB_DPPULLDOWN0		BIT(9)
+
+/* USB control register 0 in HiSysConfig system controller */
+/* PLL Integral Path Tune */
+#define USB_CTL0_PLLITUNE_MASK		GENMASK(23, 22)
+
+/* PLL Proportional Path Tune */
+#define USB_CTL0_PLLPTUNE_MASK		GENMASK(21, 18)
+
+/* PLL Bandwidth Adjustment */
+#define USB_CTL0_PLLBTUNE_MASK		GENMASK(17, 17)
+
+/* VReg18 Bypass Control */
+#define USB_CTL0_VREGBYPASS_MASK	GENMASK(16, 16)
+
+/* Retention Mode Enable */
+#define USB_CTL0_RETENABLEN_MASK	GENMASK(15, 15)
+
+/* Reserved Request Input */
+#define USB_CTL0_RESREQIN_MASK		GENMASK(14, 14)
+
+/* External VBUS Valid Select */
+#define USB_CTL0_VBUSVLDEXTSEL0_MASK	GENMASK(13, 13)
+
+/* OTG Block Disable Control */
+#define USB_CTL0_OTGDISABLE0_MASK	GENMASK(12, 12)
+
+/* Drive VBUS Enable */
+#define USB_CTL0_DRVVBUS0_MASK		GENMASK(11, 11)
+
+/* Autoresume Mode Enable */
+#define USB_CTL0_AUTORSMENB0_MASK	GENMASK(10, 10)
+
+/* HS Transceiver Asynchronous Control */
+#define USB_CTL0_HSXCVREXTCTL0_MASK	GENMASK(9, 9)
+
+/* USB 1.1 Transmit Data */
+#define USB_CTL0_FSDATAEXT0_MASK	GENMASK(8, 8)
+
+/* USB 1.1 SE0 Generation */
+#define USB_CTL0_FSSE0EXT0_MASK		GENMASK(7, 7)
+
+/* USB 1.1 Data Enable */
+#define USB_CTL0_TXENABLEN0_MASK	GENMASK(6, 6)
+
+/* Disconnect Threshold */
+#define USB_CTL0_COMPDISTUNE0_MASK	GENMASK(5, 3)
+
+/* Squelch Threshold */
+#define USB_CTL0_SQRXTUNE0_MASK		GENMASK(2, 0)
+
+/* USB control register 1 in HiSysConfig system controller */
+/* Data Detect Voltage */
+#define USB_CTL1_VDATREFTUNE0_MASK	GENMASK(23, 22)
+
+/* VBUS Valid Threshold */
+#define USB_CTL1_OTGTUNE0_MASK		GENMASK(21, 19)
+
+/* Transmitter High-Speed Crossover */
+#define USB_CTL1_TXHSXVTUNE0_MASK	GENMASK(18, 17)
+
+/* FS/LS Source Impedance */
+#define USB_CTL1_TXFSLSTUNE0_MASK	GENMASK(16, 13)
+
+/* HS DC Voltage Level */
+#define USB_CTL1_TXVREFTUNE0_MASK	GENMASK(12, 9)
+
+/* HS Transmitter Rise/Fall Time */
+#define USB_CTL1_TXRISETUNE0_MASK	GENMASK(8, 7)
+
+/* USB Source Impedance */
+#define USB_CTL1_TXRESTUNE0_MASK	GENMASK(6, 5)
+
+/* HS Transmitter Pre-Emphasis Current Control */
+#define USB_CTL1_TXPREEMPAMPTUNE0_MASK	GENMASK(4, 3)
+
+/* HS Transmitter Pre-Emphasis Duration Control */
+#define USB_CTL1_TXPREEMPPULSETUNE0_MASK	GENMASK(2, 2)
+
+/* charging detection */
+#define USB_CTL1_CHRGSRCPUENB0_MASK	GENMASK(1, 0)
+
+#define K230_PHY_CTL0_VAL \
+( \
+	FIELD_PREP(USB_CTL0_PLLITUNE_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_PLLPTUNE_MASK, 0xc) | \
+	FIELD_PREP(USB_CTL0_PLLBTUNE_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL0_VREGBYPASS_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL0_RETENABLEN_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL0_RESREQIN_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_VBUSVLDEXTSEL0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_OTGDISABLE0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_DRVVBUS0_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL0_AUTORSMENB0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_HSXCVREXTCTL0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_FSDATAEXT0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_FSSE0EXT0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_TXENABLEN0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL0_COMPDISTUNE0_MASK, 0x3) | \
+	FIELD_PREP(USB_CTL0_SQRXTUNE0_MASK, 0x3) \
+)
+
+#define K230_PHY_CTL1_VAL \
+( \
+	FIELD_PREP(USB_CTL1_VDATREFTUNE0_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL1_OTGTUNE0_MASK, 0x3) | \
+	FIELD_PREP(USB_CTL1_TXHSXVTUNE0_MASK, 0x3) | \
+	FIELD_PREP(USB_CTL1_TXFSLSTUNE0_MASK, 0x3) | \
+	FIELD_PREP(USB_CTL1_TXVREFTUNE0_MASK, 0x3) | \
+	FIELD_PREP(USB_CTL1_TXRISETUNE0_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL1_TXRESTUNE0_MASK, 0x1) | \
+	FIELD_PREP(USB_CTL1_TXPREEMPAMPTUNE0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL1_TXPREEMPPULSETUNE0_MASK, 0x0) | \
+	FIELD_PREP(USB_CTL1_CHRGSRCPUENB0_MASK, 0x0) \
+)
+
+struct k230_usb_phy_instance {
+	struct k230_usb_phy_global *global;
+	struct phy *phy;
+	u32 test_offset;
+	u32 ctl_offset;
+	int index;
+};
+
+struct k230_usb_phy_global {
+	struct k230_usb_phy_instance phys[MAX_PHYS];
+	void __iomem *base;
+};
+
+static int k230_usb_phy_power_on(struct phy *phy)
+{
+	struct k230_usb_phy_instance *inst = phy_get_drvdata(phy);
+	struct k230_usb_phy_global *global = inst->global;
+	void __iomem *base = global->base;
+	u32 val;
+
+	/* Apply recommended settings */
+	writel(K230_PHY_CTL0_VAL, base + inst->ctl_offset + CTL0_OFFSET);
+	writel(K230_PHY_CTL1_VAL, base + inst->ctl_offset + CTL1_OFFSET);
+
+	/* Configure test register (pull-ups/pull-downs) */
+	val = readl(base + inst->test_offset + TEST_CTL3_OFFSET);
+	val |= USB_IDPULLUP0;
+
+	if (inst->index == 1)
+		val |= (USB_DMPULLDOWN0 | USB_DPPULLDOWN0);
+	else
+		val &= ~(USB_DMPULLDOWN0 | USB_DPPULLDOWN0);
+
+	writel(val, base + inst->test_offset + TEST_CTL3_OFFSET);
+
+	return 0;
+}
+
+static int k230_usb_phy_power_off(struct phy *phy)
+{
+	struct k230_usb_phy_instance *inst = phy_get_drvdata(phy);
+	struct k230_usb_phy_global *global = inst->global;
+	void __iomem *base = global->base;
+	u32 val;
+
+	val = readl(base + inst->test_offset + TEST_CTL3_OFFSET);
+	val &= ~(USB_DMPULLDOWN0 | USB_DPPULLDOWN0);
+	writel(val, base + inst->test_offset + TEST_CTL3_OFFSET);
+
+	return 0;
+}
+
+static const struct phy_ops k230_usb_phy_ops = {
+	.power_on = k230_usb_phy_power_on,
+	.power_off = k230_usb_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *k230_usb_phy_xlate(struct device *dev,
+				      const struct of_phandle_args *args)
+{
+	struct k230_usb_phy_global *global = dev_get_drvdata(dev);
+	unsigned int idx = args->args[0];
+
+	if (idx >= MAX_PHYS)
+		return ERR_PTR(-EINVAL);
+
+	return global->phys[idx].phy;
+}
+
+static int k230_usb_phy_probe(struct platform_device *pdev)
+{
+	struct k230_usb_phy_global *global;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	int i;
+
+	global = devm_kzalloc(dev, sizeof(*global), GFP_KERNEL);
+	if (!global)
+		return -ENOMEM;
+	dev_set_drvdata(dev, global);
+
+	global->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(global->base))
+		return dev_err_probe(dev, PTR_ERR(global->base),
+				     "failed to map registers\n");
+
+	static const struct {
+		u32 test_offset;
+		u32 ctl_offset;
+	} phy_reg_info[MAX_PHYS] = {
+		[0] = { K230_USB0_TEST_REG_BASE, K230_USB0_CTL_REG_BASE },
+		[1] = { K230_USB1_TEST_REG_BASE, K230_USB1_CTL_REG_BASE },
+	};
+
+	for (i = 0; i < MAX_PHYS; i++) {
+		struct k230_usb_phy_instance *inst = &global->phys[i];
+		struct phy *phy;
+
+		inst->global = global;
+		inst->index = i;
+		inst->test_offset = phy_reg_info[i].test_offset;
+		inst->ctl_offset  = phy_reg_info[i].ctl_offset;
+
+		phy = devm_phy_create(dev, NULL, &k230_usb_phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy%d\n", i);
+			return PTR_ERR(phy);
+		}
+
+		phy_set_drvdata(phy, inst);
+		inst->phy = phy;
+	}
+
+	provider = devm_of_phy_provider_register(dev, k230_usb_phy_xlate);
+	if (IS_ERR(provider))
+		return PTR_ERR(provider);
+
+	return 0;
+}
+
+static const struct of_device_id k230_usb_phy_of_match[] = {
+	{ .compatible = "canaan,k230-usb-phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, k230_usb_phy_of_match);
+
+static struct platform_driver k230_usb_phy_driver = {
+	.probe = k230_usb_phy_probe,
+	.driver = {
+		.name = "k230-usb-phy",
+		.of_match_table = k230_usb_phy_of_match,
+	},
+};
+module_platform_driver(k230_usb_phy_driver);
+
+MODULE_DESCRIPTION("Canaan Kendryte K230 USB 2.0 PHY driver");
+MODULE_AUTHOR("Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>");
+MODULE_LICENSE("GPL");
-- 
2.52.0

[PATCH v5 4/4] riscv: dts: canaan: Add syscon and USB nodes for K230

[Jiayu Du]

Add top syscon and USB PHY subdevice nodes, USB0/USB1 dwc2 controller
to K230 DTSI, and enable UART0 and USB0/USB1 in DshanPI DT.

Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
---
 .../boot/dts/canaan/k230-canmv-dshanpi.dts    | 17 +++++++++
 arch/riscv/boot/dts/canaan/k230.dtsi          | 35 +++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/riscv/boot/dts/canaan/k230-canmv-dshanpi.dts b/arch/riscv/boot/dts/canaan/k230-canmv-dshanpi.dts
index 4f95b534ee87..55197cfc25b4 100644
--- a/arch/riscv/boot/dts/canaan/k230-canmv-dshanpi.dts
+++ b/arch/riscv/boot/dts/canaan/k230-canmv-dshanpi.dts
@@ -80,3 +80,20 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&usb0 {
+	vusb_d-supply = <&vdd_3v3>;
+	vusb_a-supply = <&vdd_1v8>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	vusb_d-supply = <&vdd_3v3>;
+	vusb_a-supply = <&vdd_1v8>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/canaan/k230.dtsi b/arch/riscv/boot/dts/canaan/k230.dtsi
index 8ca5c7dee427..b369b7d8dc83 100644
--- a/arch/riscv/boot/dts/canaan/k230.dtsi
+++ b/arch/riscv/boot/dts/canaan/k230.dtsi
@@ -148,5 +148,40 @@ uart4: serial@91404000 {
 			reg-shift = <2>;
 			status = "disabled";
 		};
+
+		usb0: usb@91500000 {
+			compatible = "canaan,k230-usb", "snps,dwc2";
+			reg = <0x0 0x91500000 0x0 0x40000>;
+			interrupts = <173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk K230_HS_USB0_AHB_GATE>;
+			clock-names = "otg";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <64>;
+			g-tx-fifo-size = <512 1024 64 64 64 64>;
+			phys = <&usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@91540000 {
+			compatible = "canaan,k230-usb", "snps,dwc2";
+			reg = <0x0 0x91540000 0x0 0x40000>;
+			interrupts = <174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk K230_HS_USB1_AHB_GATE>;
+			clock-names = "otg";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <64>;
+			g-tx-fifo-size = <512 1024 64 64 64 64>;
+			phys = <&usbphy 1>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@91585000 {
+			compatible = "canaan,k230-usb-phy";
+			reg = <0x0 0x91585000 0x0 0x400>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.52.0

Re: [PATCH v5 0/4] Add USB support for Canaan K230

[Jiayu Du]

On Wed, Jan 21, 2026 at 10:55:21PM +0800, Jiayu Du wrote:
> Add support for the USB PHY and DWC2 IP which is used by Canaan K230,
> and made relevant changes to the DTS.
> 
> This series is based on the initial 100ask K230 DshanPi series [1] which
> is based on the clock and pinctrl series. Check the details in the link.
> 
> Link: https://lore.kernel.org/all/20260115060801.16819-1-jiayu.riscv@isrc.iscas.ac.cn/ [1]
> 
> Changes in v5:
> - Changed the year of Copyright to 2026.
> - Add blank line after the declaration of variables
> - Fix wrong alignment.
> - Link to v4: https://lore.kernel.org/all/20260120143243.71937-1-jiayu.riscv@isrc.iscas.ac.cn/
> 
> Changes in v4:
> - Shrink reg length to match the address/size-cells in k230-usb-phy yaml.
> - Move all PHY instance creation and initialization from xlate to probe.
> - Modify xlate function to only perform index lookup for PHY instances.
> - Define all register base offsets macros at the top of file instead of
>   hard-coding magic numbers directly in probe.
> - Link to v2: https://lore.kernel.org/all/20260115064223.21926-1-jiayu.riscv@isrc.iscas.ac.cn/
> 
> Changes in v3:
> - Please ignore v3.
> 
> Changes in v2:
> - Fold the child into the parent in dtsi.
> - Define one usbphy with phy-cells=1.
> - Delete the clock of the usbphy as it is not needed.
> - Link to v1: https://lore.kernel.org/all/20251230023725.15966-1-jiayu.riscv@isrc.iscas.ac.cn/
> 
> Jiayu Du (4):
>   dt-bindings: phy: Add Canaan K230 USB PHY
>   dt-bindings: usb: dwc2: Add support for Canaan K230 SoC
>   phy: usb: Add driver for Canaan K230 USB 2.0 PHY
>   riscv: dts: canaan: Add syscon and USB nodes for K230
> 
>  .../bindings/phy/canaan,k230-usb-phy.yaml     |  35 +++
>  .../devicetree/bindings/usb/dwc2.yaml         |   3 +
>  .../boot/dts/canaan/k230-canmv-dshanpi.dts    |  17 ++
>  arch/riscv/boot/dts/canaan/k230.dtsi          |  35 +++
>  drivers/phy/Kconfig                           |   1 +
>  drivers/phy/Makefile                          |   1 +
>  drivers/phy/canaan/Kconfig                    |  14 +
>  drivers/phy/canaan/Makefile                   |   2 +
>  drivers/phy/canaan/phy-k230-usb.c             | 284 ++++++++++++++++++
>  9 files changed, 392 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml
>  create mode 100644 drivers/phy/canaan/Kconfig
>  create mode 100644 drivers/phy/canaan/Makefile
>  create mode 100644 drivers/phy/canaan/phy-k230-usb.c
> 
> -- 
> 2.52.0
> 
Hello Vinod, could you please take a look at this patch? Thank you!

Regards,
Jiayu Du

Re: [PATCH v5 0/4] Add USB support for Canaan K230

[Jiayu Du]

On Mon, Feb 02, 2026 at 07:31:36PM +0800, Jiayu Du wrote:
> On Wed, Jan 21, 2026 at 10:55:21PM +0800, Jiayu Du wrote:
> > Add support for the USB PHY and DWC2 IP which is used by Canaan K230,
> > and made relevant changes to the DTS.
> > 
> > This series is based on the initial 100ask K230 DshanPi series [1] which
> > is based on the clock and pinctrl series. Check the details in the link.
> > 
> > Link: https://lore.kernel.org/all/20260115060801.16819-1-jiayu.riscv@isrc.iscas.ac.cn/ [1]
> > 
> > Changes in v5:
> > - Changed the year of Copyright to 2026.
> > - Add blank line after the declaration of variables
> > - Fix wrong alignment.
> > - Link to v4: https://lore.kernel.org/all/20260120143243.71937-1-jiayu.riscv@isrc.iscas.ac.cn/
> > 
> > Changes in v4:
> > - Shrink reg length to match the address/size-cells in k230-usb-phy yaml.
> > - Move all PHY instance creation and initialization from xlate to probe.
> > - Modify xlate function to only perform index lookup for PHY instances.
> > - Define all register base offsets macros at the top of file instead of
> >   hard-coding magic numbers directly in probe.
> > - Link to v2: https://lore.kernel.org/all/20260115064223.21926-1-jiayu.riscv@isrc.iscas.ac.cn/
> > 
> > Changes in v3:
> > - Please ignore v3.
> > 
> > Changes in v2:
> > - Fold the child into the parent in dtsi.
> > - Define one usbphy with phy-cells=1.
> > - Delete the clock of the usbphy as it is not needed.
> > - Link to v1: https://lore.kernel.org/all/20251230023725.15966-1-jiayu.riscv@isrc.iscas.ac.cn/
> > 
> > Jiayu Du (4):
> >   dt-bindings: phy: Add Canaan K230 USB PHY
> >   dt-bindings: usb: dwc2: Add support for Canaan K230 SoC
> >   phy: usb: Add driver for Canaan K230 USB 2.0 PHY
> >   riscv: dts: canaan: Add syscon and USB nodes for K230
> > 
> >  .../bindings/phy/canaan,k230-usb-phy.yaml     |  35 +++
> >  .../devicetree/bindings/usb/dwc2.yaml         |   3 +
> >  .../boot/dts/canaan/k230-canmv-dshanpi.dts    |  17 ++
> >  arch/riscv/boot/dts/canaan/k230.dtsi          |  35 +++
> >  drivers/phy/Kconfig                           |   1 +
> >  drivers/phy/Makefile                          |   1 +
> >  drivers/phy/canaan/Kconfig                    |  14 +
> >  drivers/phy/canaan/Makefile                   |   2 +
> >  drivers/phy/canaan/phy-k230-usb.c             | 284 ++++++++++++++++++
> >  9 files changed, 392 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/canaan,k230-usb-phy.yaml
> >  create mode 100644 drivers/phy/canaan/Kconfig
> >  create mode 100644 drivers/phy/canaan/Makefile
> >  create mode 100644 drivers/phy/canaan/phy-k230-usb.c
> > 
> > -- 
> > 2.52.0
> > 
> Hello Vinod, could you please take a look at this patch? Thank you!
> 
> Regards,
> Jiayu Du

Hi Vinod, will you review this patch? Thank you again!

Regards,
Jiayu Du

> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: (subset) [PATCH v5 0/4] Add USB support for Canaan K230

[Vinod Koul]

On Wed, 21 Jan 2026 22:55:21 +0800, Jiayu Du wrote:
> Add support for the USB PHY and DWC2 IP which is used by Canaan K230,
> and made relevant changes to the DTS.
> 
> This series is based on the initial 100ask K230 DshanPi series [1] which
> is based on the clock and pinctrl series. Check the details in the link.
> 
> Link: https://lore.kernel.org/all/20260115060801.16819-1-jiayu.riscv@isrc.iscas.ac.cn/ [1]
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: phy: Add Canaan K230 USB PHY
      commit: 50357e7d7992ba8f02c87ff7a5c4db17918635da
[3/4] phy: usb: Add driver for Canaan K230 USB 2.0 PHY
      commit: 8787fa1da603e9e51efff11841e97b5d374aef34

Best regards,
-- 
~Vinod

Re: [PATCH v5 2/4] dt-bindings: usb: dwc2: Add support for Canaan K230 SoC

[Jiayu Du]

On Wed, Jan 21, 2026 at 10:55:23PM +0800, Jiayu Du wrote:
> Add 'canaan,k230-usb' compatible string with 'snps,dwc2' as fallback
> for the DWC2 IP which is used by Canaan K230.
> 
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>

Hi Rob,

Will this patch2 be applied for next?

Best regards,
Jiayu Du

> ---
>  Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
> index 6c3a10991b8b..352487c6392a 100644
> --- a/Documentation/devicetree/bindings/usb/dwc2.yaml
> +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
> @@ -17,6 +17,9 @@ properties:
>    compatible:
>      oneOf:
>        - const: brcm,bcm2835-usb
> +      - items:
> +          - const: canaan,k230-usb
> +          - const: snps,dwc2
>        - const: hisilicon,hi6220-usb
>        - const: ingenic,jz4775-otg
>        - const: ingenic,jz4780-otg
> -- 
> 2.52.0
> 
> 
> -- 
> linux-phy mailing list
> linux-phy@lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy