From: Roland Dreier <rdreier@cisco.com>
To: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>,
Thomas Mingarelli <thomas.mingarelli@hp.com>
Subject: hpwdt oops in clflush_cache_range
Date: Wed, 27 Feb 2008 09:08:20 -0800 [thread overview]
Message-ID: <adad4qiwcmz.fsf@cisco.com> (raw)
With an up-to-date git tree (head 7704a8b6) I'm seeing the oops below
when the hpwdt driver gets loaded during boot on an HP DL380 system.
I don't think I've seen any previous reports of this, and I guess it
doesn't really count as a regression since the hpwdt driver was only
added after 2.6.25-rc2.
I haven't tried to debug this at all yet but any guidance about what
information is useful for what looks to be an issue with c_p_a would
be appreciated.
- R.
BUG: unable to handle kernel paging request at ffffc20001a08000
IP: [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
PGD 1bf80e067 PUD 1bf80f067 PMD 1bb1ab067 PTE 80000047000ee17b
Oops: 0009 [1] SMP
CPU 2
Modules linked in: ide_pci_generic(+) ipmi_si ib_mthca container piix thermal ib_mad serio_raw ipmi_msghandler bnx2 evdev hpwdt(+) ib_core zlib_inflate ehci_hcd uhci_hcd button processor pcspkr psmouse ide_core
Pid: 1291, comm: modprobe Not tainted 2.6.25-rc3 #51
RIP: 0010:[<ffffffff8021dacc>] [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
RSP: 0018:ffff8101bd421bc0 EFLAGS: 00010293
RAX: ffff8101bb1ab040 RBX: 0000000000000000 RCX: 00000001bb1ab001
RDX: ffffc20001a08fff RSI: 0000000000001000 RDI: ffffc20001a08000
RBP: ffffc20001a08000 R08: ffff810000000000 R09: 00003ffffffff000
R10: ffffc20001a08000 R11: 000000008807c350 R12: ffff8101bd421bf4
R13: 0000000000000000 R14: 0000000000000001 R15: 800000000000017b
FS: 00007f62818166e0(0000) GS:ffff8101bf802c00(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc20001a08000 CR3: 00000001bbdc6000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1291, threadinfo ffff8101bd420000, task ffff8101bbd34000)
Stack: ffffffff8021e60b ffffc20001a09000 0000000000000018 0000000000000000
0000000100000001 00000000047000ee 0000000100001000 0000000000001000
ffffc20001a08000 00240047000ee000 ffff8101bbcd5f00 00240047000ee000
Call Trace:
[<ffffffff8021e60b>] ? change_page_attr_set_clr+0x140/0x18b
[<ffffffff8021d94c>] ? __ioremap+0x197/0x1cd
[<ffffffff8807a566>] ? :hpwdt:hpwdt_init_one+0x1c3/0x386
[<ffffffff803351fe>] ? pci_device_probe+0xb3/0xfb
[<ffffffff80393ffe>] ? driver_probe_device+0xb5/0x132
[<ffffffff8039411d>] ? __driver_attach+0x0/0x93
[<ffffffff80394177>] ? __driver_attach+0x5a/0x93
[<ffffffff803933fa>] ? bus_for_each_dev+0x47/0x72
[<ffffffff80393c1e>] ? bus_add_driver+0xb1/0x1fb
[<ffffffff80394391>] ? driver_register+0x59/0xce
[<ffffffff80335487>] ? __pci_register_driver+0x5a/0x8b
[<ffffffff802526a1>] ? sys_init_module+0x18ff/0x1a08
[<ffffffff8023ea31>] ? param_get_int+0x0/0x14
[<ffffffff8024a6be>] ? trace_hardirqs_on+0xef/0x113
[<ffffffff8041e1fa>] ? trace_hardirqs_on_thunk+0x35/0x3a
[<ffffffff8020be5b>] ? system_call_after_swapgs+0x7b/0x80
Code: 00 e8 de 09 02 00 31 d2 48 85 c0 74 0d 48 8b 40 08 b2 01 48 89 83 80 00 00 00 5b 89 d0 c3 90 89 f6 48 8d 54 37 ff 0f ae f0 eb 0d <0f> ae 3f 0f b7 05 4e ce 36 00 48 01 c7 48 39 d7 72 ee 0f ae 3a
RIP [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
RSP <ffff8101bd421bc0>
CR2: ffffc20001a08000
---[ end trace 5e3e8191157a34b6 ]---
next reply other threads:[~2008-02-27 17:08 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-27 17:08 Roland Dreier [this message]
2008-02-27 17:37 ` hpwdt oops in clflush_cache_range Mingarelli, Thomas
2008-02-27 18:14 ` Thomas Gleixner
2008-02-27 18:38 ` Roland Dreier
2008-02-27 19:48 ` Thomas Gleixner
2008-02-27 20:36 ` Ingo Molnar
2008-02-27 20:42 ` Thomas Gleixner
2008-02-27 20:44 ` Ingo Molnar
2008-02-27 20:59 ` Thomas Gleixner
2008-02-27 21:14 ` Ingo Molnar
2008-02-27 21:17 ` Roland Dreier
2008-02-27 21:35 ` Roland Dreier
2008-02-27 23:44 ` Mingarelli, Thomas
2008-02-28 0:12 ` Roland Dreier
2008-02-28 3:09 ` Mingarelli, Thomas
[not found] ` <E14D1C2A44812C4F9C3ED321127EDF6505829D5D6C@G3W0854.americas.hpqcorp.net>
2008-02-28 17:38 ` [PATCH] [WATCHDOG] Fix declaration of struct smbios_entry_point in hpwdt Roland Dreier
2008-02-28 17:48 ` [PATCH for 2.6.26] [WATCHDOG] Fix return value warning " Roland Dreier
2008-02-28 20:34 ` [PATCH] [WATCHDOG] hpwdt: Use dmi_walk() instead of own copy Roland Dreier
2008-02-28 21:24 ` Mingarelli, Thomas
2008-02-28 21:26 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=adad4qiwcmz.fsf@cisco.com \
--to=rdreier@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=thomas.mingarelli@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox