Re: [PATCH] ACPI: Kill overly verbose "power state" log messages

[Roland Dreier <rdreier@cisco.com>]

Len, I see I messed up editing my changelog message, see below...

 > > I was recently lucky enough to get a 64-CPU system.  The processors
 > > actually have T-states, so my kernel log ends up with 64 lines like:
 > > 
 > >     ACPI: CPU0 (power states: C1[C1] C2[C3])
 > > 
 > > This is pretty useless clutter because this info is already available
 > > after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as
 > > well as /proc/acpi/processor/CPU*/power.
 > > 
 > > So just delete the code that prints the throttling states in
 > > processor_idle.c.

 > It seems that it is unnecessary to delete the C-state info.

Sorry, this is a little too terse for me to know what you mean.
Certainly it's not useful to have 64 copies of

    ACPI: CPU0 (power states: C1[C1] C2[C3])

in the kernel log on a big box, when all 64 processors are going to
support the same C-states.  However, I don't see what the use of having
even one copy in the boot log is, when I can easily get that info at
runtime from /proc/acpi/processor/CPU*/power.


Anyway, Len, I see I copy-and-pasted too quickly from my T-state patch
submission... if you want to apply, a version with better changelog would be:

<--- snip --->

I was recently lucky enough to get a 64-CPU system, so my kernel log
ends up with 64 lines like:

    ACPI: CPU0 (power states: C1[C1] C2[C3])

This is pretty useless clutter because this info is already available
after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as
well as /proc/acpi/processor/CPU*/power.

So just delete the code that prints the C-states in processor_idle.c.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/acpi/processor_idle.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cc61a62..706eacf 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1214,13 +1214,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
 		acpi_processor_setup_cpuidle(pr);
 		if (cpuidle_register_device(&pr->power.dev))
 			return -EIO;
-
-		printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
-		for (i = 1; i <= pr->power.count; i++)
-			if (pr->power.states[i].valid)
-				printk(" C%d[C%d]", i,
-				       pr->power.states[i].type);
-		printk(")\n");
 	}
 #ifdef CONFIG_ACPI_PROCFS
 	/* 'power' [R] */