From: Florian Fainelli <f.fainelli@gmail.com>
To: "Wang, Xiaolei" <Xiaolei.Wang@windriver.com>,
"bcm-kernel-feedback-list@broadcom.com"
<bcm-kernel-feedback-list@broadcom.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
"pabeni@redhat.com" <pabeni@redhat.com>,
"richardcochran@gmail.com" <richardcochran@gmail.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: BCM54220: After the BCM54220 closes the auto-negotiation, the configuration forces the 1000M network port to be linked down all the time.
Date: Fri, 17 Feb 2023 09:13:30 -0800 [thread overview]
Message-ID: <ae41658a-ddf9-290d-e674-550372619b8f@gmail.com> (raw)
In-Reply-To: <MW5PR11MB5764F9734ACFED2EF390DFF795A19@MW5PR11MB5764.namprd11.prod.outlook.com>
On 2/17/23 00:06, Wang, Xiaolei wrote:
> hi
>
> When I use the nxp-imx7 board, eth0 is connected to the PC, eth0 is
> turned off the auto-negotiation mode, and the configuration is forced to
> 10M, 100M, 1000M. When configured to force 1000M，
> The link status of phy status reg(0x1) is always 0, and the chip of
> phy is BCM54220, but I did not find the relevant datasheet on BCM
> official website, does anyone have any suggestions or the datasheet of
> BCM54220?
I don't have access to a system with a BCM54220 but can look at the
datasheet, could you provide the full output of mii-diag in both cases?
What do the PC report as far as link partner advertisement goes etc.?
You are using a twister pair cable to connect your two systems?
--
Florian
next parent reply other threads:[~2023-02-17 17:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <MW5PR11MB5764F9734ACFED2EF390DFF795A19@MW5PR11MB5764.namprd11.prod.outlook.com>
2023-02-17 17:13 ` Florian Fainelli [this message]
2023-02-21 8:04 ` BCM54220: After the BCM54220 closes the auto-negotiation, the configuration forces the 1000M network port to be linked down all the time wangxiaolei
2023-02-21 18:44 ` Doug Berger
2023-02-21 19:41 ` Andrew Lunn
2023-02-21 19:53 ` Doug Berger
2023-02-21 21:51 ` Doug Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae41658a-ddf9-290d-e674-550372619b8f@gmail.com \
--to=f.fainelli@gmail.com \
--cc=Xiaolei.Wang@windriver.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox