Re: [PATCH net-next v2 1/7] net: ti: icssg-prueth: Enable IEP1

[Roger Quadros <rogerq@kernel.org>]

Hi,

On 13/08/2024 10:42, MD Danish Anwar wrote:
> IEP1 is needed by firmware to enable FDB learning and FDB ageing.

Required by which firmware?

Does dual-emac firmware need this?

> Always enable IEP1
> 
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
>  drivers/net/ethernet/ti/icssg/icssg_prueth.c | 14 ++++----------
>  1 file changed, 4 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> index 53a3e44b99a2..613bd8de6eb8 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> @@ -1256,12 +1256,8 @@ static int prueth_probe(struct platform_device *pdev)
>  		goto put_iep0;
>  	}
>  
> -	if (prueth->pdata.quirk_10m_link_issue) {
> -		/* Enable IEP1 for FW in 64bit mode as W/A for 10M FD link detect issue under TX
> -		 * traffic.
> -		 */
> -		icss_iep_init_fw(prueth->iep1);
> -	}
> +	/* Enable IEP1 for FW as it's needed by FW for FDB Learning and FDB ageing */
> +	icss_iep_init_fw(prueth->iep1);
>  
>  	/* setup netdev interfaces */
>  	if (eth0_node) {
> @@ -1366,8 +1362,7 @@ static int prueth_probe(struct platform_device *pdev)
>  	}
>  
>  exit_iep:
> -	if (prueth->pdata.quirk_10m_link_issue)
> -		icss_iep_exit_fw(prueth->iep1);
> +	icss_iep_exit_fw(prueth->iep1);
>  	icss_iep_put(prueth->iep1);
>  
>  put_iep0:
> @@ -1424,8 +1419,7 @@ static void prueth_remove(struct platform_device *pdev)
>  		prueth_netdev_exit(prueth, eth_node);
>  	}
>  
> -	if (prueth->pdata.quirk_10m_link_issue)
> -		icss_iep_exit_fw(prueth->iep1);
> +	icss_iep_exit_fw(prueth->iep1);
>  
>  	icss_iep_put(prueth->iep1);
>  	icss_iep_put(prueth->iep0);

-- 
cheers,
-roger