From: Pranjal Shrivastava <praan@google.com>
To: Mostafa Saleh <smostafa@google.com>
Cc: iommu@lists.linux.dev, linux-kernel@vger.kernel.org,
joro@8bytes.org, robin.murphy@arm.com, will@kernel.org,
jgg@ziepe.ca, baolu.lu@linux.intel.com, kevin.tian@intel.com
Subject: Re: [PATCH] iommu/pages: Fix iommu_pages_flush_incoherent() for non-x86
Date: Sat, 25 Apr 2026 05:36:15 +0000 [thread overview]
Message-ID: <aexSz6tANRfo0D_y@google.com> (raw)
In-Reply-To: <20260424115051.2082174-1-smostafa@google.com>
On Fri, Apr 24, 2026 at 11:50:51AM +0000, Mostafa Saleh wrote:
> The dma_sync_single_for_device() function expects a dma_addr_t, but
> iommu_pages_flush_incoherent() was incorrectly passing a virtual
> address.
>
> Since iommu_pages_start_incoherent() enforces a 1:1 mapping between
> DMA addresses and physical addresses (checked via WARN_ON), we can
> convert the virtual address to a physical address before passing it to
> the DMA API.
>
> This also matches the behaviour of the other non-x86 in
> iommu_pages_free_incoherent(), which uses virt_to_phys(virt);
>
> Fixes: 36ae67b13976 ("iommu/pages: Add support for incoherent IOMMU page table walkers")
> Signed-off-by: Mostafa Saleh <smostafa@google.com>
> ---
> drivers/iommu/iommu-pages.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/iommu-pages.h b/drivers/iommu/iommu-pages.h
> index ae9da4f571f6..e9e605b5fa3a 100644
> --- a/drivers/iommu/iommu-pages.h
> +++ b/drivers/iommu/iommu-pages.h
> @@ -137,7 +137,7 @@ static inline void iommu_pages_flush_incoherent(struct device *dma_dev,
> void *virt, size_t offset,
> size_t len)
> {
> - dma_sync_single_for_device(dma_dev, (uintptr_t)virt + offset, len,
> + dma_sync_single_for_device(dma_dev, virt_to_phys(virt) + offset, len,
> DMA_TO_DEVICE);
> }
> void iommu_pages_stop_incoherent_list(struct iommu_pages_list *list,
Nice catch!
Additionally, I think we should update the comment in
iommu_pages_start_incoherent() to clarify the restriction. The current
comment says:
"The DMA API is not allowed to do anything other than DMA direct."
But dma_direct actually handles bus offsets perfectly fine. However,
this code fails on platforms with a bus offset is because of the strict
check:
WARN_ON(dma != virt_to_phys(virt))
which enforces a strict 1:1 mapping.
So saying that we only allow dma_direct is a bit misleading as to why
bus offsets fail here. We should update that comment to something like:
diff --git a/drivers/iommu/iommu-pages.c b/drivers/iommu/iommu-pages.c
index 3bab175d8557..3904de686206 100644
--- a/drivers/iommu/iommu-pages.c
+++ b/drivers/iommu/iommu-pages.c
@@ -161,9 +161,11 @@ int iommu_pages_start_incoherent(void *virt, struct device *dma_dev)
return -EINVAL;
/*
- * The DMA API is not allowed to do anything other than DMA
- * direct. It would be nice to also check
- * dev_is_dma_coherent(dma_dev));
+ * We enforce a strict 1:1 mapping (dma == phys). This means
+ * platforms with a bus offset or those that require translation for
+ * the IOMMU's own memory are not supported, even though dma_direct
+ * could otherwise handle bus offsets.
+ * It would be nice to also check dev_is_dma_coherent(dma_dev));
*/
if (WARN_ON(dma != virt_to_phys(virt))) {
dma_unmap_single(dma_dev, dma, ioptdesc_mem_size(iopt),
For the fix:
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Thanks,
Praan
prev parent reply other threads:[~2026-04-25 5:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-24 11:50 [PATCH] iommu/pages: Fix iommu_pages_flush_incoherent() for non-x86 Mostafa Saleh
2026-04-24 13:07 ` Jason Gunthorpe
2026-04-25 5:36 ` Pranjal Shrivastava [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aexSz6tANRfo0D_y@google.com \
--to=praan@google.com \
--cc=baolu.lu@linux.intel.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=smostafa@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox