From: "Peter Chen (CIX)" <peter.chen@kernel.org>
To: pawell@cadence.com
Cc: Roger Quadros <rogerq@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v3] usb: cdnsp: Add support for device-only configuration
Date: Sat, 9 May 2026 09:31:01 +0800 [thread overview]
Message-ID: <af6OVX/Rh6YYW1qq@nchen-desktop> (raw)
In-Reply-To: <20260508-no_drd_config-v3-1-0614f5044721@cadence.com>
On 26-05-08 12:06:39, Pawel Laszczak via B4 Relay wrote:
> From: Pawel Laszczak <pawell@cadence.com>
>
> This patch introduces support for the Cadence USBSSP (cdnsp)
> controller in hardware configurations where the Dual-Role Device (DRD)
> register block is not implemented or is inaccessible.
>
> In such cases, the driver cannot rely on the DRD logic to manage roles
> and must operate exclusively in a fixed peripheral/host mode.
>
> The change in BAR indexing (from BAR 2 to BAR 1) is a direct
> consequence of the 32-bit addressing used in this specific
> DRD-disabled hardware layout, compared to the 64-bit addressing
> used in DRD-enabled configurations.
>
> Tested on a PCI platform with a hardware configuration that lacks
> DRD support. Platform-side changes are included to support the PCI
> glue layer's property injection to handle this specific layout.
>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> v3:
> - Improved descriptions and comments for better clarity.
> - Introduced the 'no_drd' property to indicate missing DRD register block.
> - Added support for fixed host-only and device-only configurations.
> - Ensured cdns_otg_disable_irq is called only when no_drd is false.
> - Updated cdns_drd_gadget_on/off to ensure PHY mode is correctly
> handled even if DRD is disabled.
>
> v2:
> - Changed otg_irq to be optionali.
> - Added cdns->no_drd check in cdns_power_is_lost.
> - Added cdns->no_drd check in cdns_get_id.
> ---
> drivers/usb/cdns3/cdns3-plat.c | 26 ++++++++++++++----------
> drivers/usb/cdns3/cdnsp-pci.c | 46 +++++++++++++++++++++++++++++++++---------
> drivers/usb/cdns3/core.c | 3 ++-
> drivers/usb/cdns3/core.h | 4 ++++
> drivers/usb/cdns3/drd.c | 44 ++++++++++++++++++++++++++++++++++++++--
For cdns3 changes:
Acked-by: Peter Chen <peter.chen@kernel.org>
> include/linux/pci_ids.h | 1 +
> 6 files changed, 101 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
> index 3fe3109a3688..86c963a072db 100644
> --- a/drivers/usb/cdns3/cdns3-plat.c
> +++ b/drivers/usb/cdns3/cdns3-plat.c
> @@ -81,6 +81,7 @@ static int cdns3_plat_probe(struct platform_device *pdev)
> if (cdns->pdata && cdns->pdata->override_apb_timeout)
> cdns->override_apb_timeout = cdns->pdata->override_apb_timeout;
>
> + cdns->no_drd = device_property_read_bool(dev, "no_drd");
When introduce a new property, please update binding doc accordingly.
Peter
> diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c
> index 432007cfe695..992700479172 100644
> --- a/drivers/usb/cdns3/cdnsp-pci.c
> +++ b/drivers/usb/cdns3/cdnsp-pci.c
> @@ -19,6 +19,7 @@
>
> struct cdnsp_wrap {
> struct platform_device *plat_dev;
> + struct property_entry prop[3];
> struct resource dev_res[6];
> int devfn;
> };
> @@ -29,10 +30,15 @@ struct cdnsp_wrap {
> #define RES_HOST_ID 3
> #define RES_DEV_ID 4
> #define RES_DRD_ID 5
> -
> +/* DRD PCI configuration - 64-bit addressing */
> +/* First PCI function */
> #define PCI_BAR_HOST 0
> -#define PCI_BAR_OTG 0
> #define PCI_BAR_DEV 2
> +/* Second PCI function */
> +#define PCI_BAR_OTG 0
> +/* Device only PCI configuration - 32-bit addressing */
> +/* First PCI function */
> +#define PCI_BAR_ONLY_DEV 1
>
> #define PCI_DEV_FN_HOST_DEVICE 0
> #define PCI_DEV_FN_OTG 1
> @@ -65,6 +71,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
> struct cdnsp_wrap *wrap;
> struct resource *res;
> struct pci_dev *func;
> + bool no_drd = false;
> int ret = 0;
>
> /*
> @@ -75,11 +82,14 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
> pdev->devfn != PCI_DEV_FN_OTG))
> return -EINVAL;
>
> + if (pdev->device == PCI_DEVICE_ID_CDNS_UDC_USBSSP)
> + no_drd = true;
> +
> func = cdnsp_get_second_fun(pdev);
> - if (!func)
> + if (!func && !no_drd)
> return -EINVAL;
>
> - if (func->class == PCI_CLASS_SERIAL_USB_XHCI ||
> + if ((func && func->class == PCI_CLASS_SERIAL_USB_XHCI) ||
> pdev->class == PCI_CLASS_SERIAL_USB_XHCI) {
> ret = -EINVAL;
> goto put_pci;
> @@ -93,7 +103,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
>
> pci_set_master(pdev);
>
> - if (pci_is_enabled(func)) {
> + if (func && pci_is_enabled(func)) {
> wrap = pci_get_drvdata(func);
> } else {
> wrap = kzalloc_obj(*wrap);
> @@ -106,10 +116,12 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
> res = wrap->dev_res;
>
> if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
> + int bar_dev = no_drd ? PCI_BAR_ONLY_DEV : PCI_BAR_DEV;
> +
> /* Function 0: host(BAR_0) + device(BAR_2). */
> dev_dbg(&pdev->dev, "Initialize Device resources\n");
> - res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
> - res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV);
> + res[RES_DEV_ID].start = pci_resource_start(pdev, bar_dev);
> + res[RES_DEV_ID].end = pci_resource_end(pdev, bar_dev);
> res[RES_DEV_ID].name = "dev";
> res[RES_DEV_ID].flags = IORESOURCE_MEM;
> dev_dbg(&pdev->dev, "USBSSP-DEV physical base addr: %pa\n",
> @@ -145,9 +157,20 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
> wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
> }
>
> - if (pci_is_enabled(func)) {
> + if (no_drd || pci_is_enabled(func)) {
> + u8 idx = 0;
> +
> /* set up platform device info */
> pdata.override_apb_timeout = CHICKEN_APB_TIMEOUT_VALUE;
> +
> + if (no_drd) {
> + wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "peripheral");
> + wrap->prop[idx++] = PROPERTY_ENTRY_BOOL("no_drd");
> + } else {
> + wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "otg");
> + wrap->prop[idx++] = PROPERTY_ENTRY_BOOL("usb-role-switch");
> + }
> +
> memset(&plat_info, 0, sizeof(plat_info));
> plat_info.parent = &pdev->dev;
> plat_info.fwnode = pdev->dev.fwnode;
> @@ -158,6 +181,7 @@ static int cdnsp_pci_probe(struct pci_dev *pdev,
> plat_info.dma_mask = pdev->dma_mask;
> plat_info.data = &pdata;
> plat_info.size_data = sizeof(pdata);
> + plat_info.properties = wrap->prop;
> wrap->devfn = pdev->devfn;
> /* register platform device */
> wrap->plat_dev = platform_device_register_full(&plat_info);
> @@ -185,13 +209,17 @@ static void cdnsp_pci_remove(struct pci_dev *pdev)
> if (wrap->devfn == pdev->devfn)
> platform_device_unregister(wrap->plat_dev);
>
> - if (!pci_is_enabled(func))
> + if (!func || !pci_is_enabled(func))
> kfree(wrap);
>
> pci_dev_put(func);
> }
>
> static const struct pci_device_id cdnsp_pci_ids[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
> + .class = PCI_CLASS_SERIAL_USB_DEVICE },
> + { PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
> + .class = PCI_CLASS_SERIAL_USB_CDNS },
> { PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
> .class = PCI_CLASS_SERIAL_USB_DEVICE },
> { PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> index 6a8d1fefbc0d..504bdf13ea80 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -70,7 +70,8 @@ static void cdns_role_stop(struct cdns *cdns)
> static void cdns_exit_roles(struct cdns *cdns)
> {
> cdns_role_stop(cdns);
> - cdns_drd_exit(cdns);
> + if (!cdns->no_drd)
> + cdns_drd_exit(cdns);
> }
>
> /**
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index bca973b999a4..8c492fda924c 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -84,6 +84,9 @@ struct cdns3_platform_data {
> * value in CHICKEN_BITS_3 will be preserved.
> * @gadget_init: pointer to gadget initialization function
> * @host_init: pointer to host initialization function
> + * @no_drd: DRD register block is inaccessible. The controller is hardwired to
> + * single role (host or device) or the logic for role switching is
> + * missing.
> */
> struct cdns {
> struct device *dev;
> @@ -124,6 +127,7 @@ struct cdns {
> u32 override_apb_timeout;
> int (*gadget_init)(struct cdns *cdns);
> int (*host_init)(struct cdns *cdns);
> + bool no_drd;
> };
>
> int cdns_hw_role_switch(struct cdns *cdns);
> diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
> index 84fb38a5723a..f87cf85cb97a 100644
> --- a/drivers/usb/cdns3/drd.c
> +++ b/drivers/usb/cdns3/drd.c
> @@ -87,6 +87,9 @@ int cdns_get_id(struct cdns *cdns)
> {
> int id;
>
> + if (cdns->no_drd)
> + return 0;
> +
> id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
> dev_dbg(cdns->dev, "OTG ID: %d", id);
>
> @@ -107,7 +110,7 @@ void cdns_clear_vbus(struct cdns *cdns)
> {
> u32 reg;
>
> - if (cdns->version != CDNSP_CONTROLLER_V2)
> + if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
> return;
>
> reg = readl(&cdns->otg_cdnsp_regs->override);
> @@ -120,7 +123,7 @@ void cdns_set_vbus(struct cdns *cdns)
> {
> u32 reg;
>
> - if (cdns->version != CDNSP_CONTROLLER_V2)
> + if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
> return;
>
> reg = readl(&cdns->otg_cdnsp_regs->override);
> @@ -181,6 +184,9 @@ int cdns_drd_host_on(struct cdns *cdns)
> u32 val, ready_bit;
> int ret;
>
> + if (cdns->no_drd)
> + goto phy_set;
> +
> /* Enable host mode. */
> writel(OTGCMD_HOST_BUS_REQ | OTGCMD_OTG_DIS,
> &cdns->otg_regs->cmd);
> @@ -197,6 +203,7 @@ int cdns_drd_host_on(struct cdns *cdns)
> if (ret)
> dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
>
> +phy_set:
> phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_HOST);
> phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
> return ret;
> @@ -210,6 +217,9 @@ void cdns_drd_host_off(struct cdns *cdns)
> {
> u32 val;
>
> + if (cdns->no_drd)
> + goto phy_set;
> +
> writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
> OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
> &cdns->otg_regs->cmd);
> @@ -218,6 +228,8 @@ void cdns_drd_host_off(struct cdns *cdns)
> readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
> !(val & OTGSTATE_HOST_STATE_MASK),
> 1, 2000000);
> +
> +phy_set:
> phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
> phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
> }
> @@ -234,6 +246,9 @@ int cdns_drd_gadget_on(struct cdns *cdns)
> u32 ready_bit;
> int ret, val;
>
> + if (cdns->no_drd)
> + goto phy_set;
> +
> /* switch OTG core */
> writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
>
> @@ -251,6 +266,7 @@ int cdns_drd_gadget_on(struct cdns *cdns)
> return ret;
> }
>
> +phy_set:
> phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_DEVICE);
> phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
> return 0;
> @@ -265,6 +281,9 @@ void cdns_drd_gadget_off(struct cdns *cdns)
> {
> u32 val;
>
> + if (cdns->no_drd)
> + goto phy_set;
> +
> /*
> * Driver should wait at least 10us after disabling Device
> * before turning-off Device (DEV_BUS_DROP).
> @@ -277,6 +296,8 @@ void cdns_drd_gadget_off(struct cdns *cdns)
> readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
> !(val & OTGSTATE_DEV_STATE_MASK),
> 1, 2000000);
> +
> +phy_set:
> phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
> phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
> }
> @@ -392,6 +413,19 @@ int cdns_drd_init(struct cdns *cdns)
> u32 state, reg;
> int ret;
>
> + if (cdns->no_drd) {
> + cdns->dr_mode = usb_get_dr_mode(cdns->dev);
> + cdns->version = CDNSP_CONTROLLER_V2;
> +
> + if (cdns->dr_mode != USB_DR_MODE_HOST &&
> + cdns->dr_mode != USB_DR_MODE_PERIPHERAL) {
> + dev_err(cdns->dev, "Incorrect dr_mode\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> + }
> +
> regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
> if (IS_ERR(regs))
> return PTR_ERR(regs);
> @@ -492,6 +526,9 @@ int cdns_drd_init(struct cdns *cdns)
>
> int cdns_drd_exit(struct cdns *cdns)
> {
> + if (cdns->no_drd)
> + return 0;
> +
> cdns_otg_disable_irq(cdns);
>
> return 0;
> @@ -500,6 +537,9 @@ int cdns_drd_exit(struct cdns *cdns)
> /* Indicate the cdns3 core was power lost before */
> bool cdns_power_is_lost(struct cdns *cdns)
> {
> + if (cdns->no_drd)
> + return false;
> +
> if (cdns->version == CDNS3_CONTROLLER_V0) {
> if (!(readl(&cdns->otg_v0_regs->simulate) & BIT(0)))
> return true;
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 24cb42f66e4b..a6b9b6f6d8cc 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2424,6 +2424,7 @@
> #define PCI_DEVICE_ID_CDNS_USBSS 0x0100
> #define PCI_DEVICE_ID_CDNS_USB 0x0120
> #define PCI_DEVICE_ID_CDNS_USBSSP 0x0200
> +#define PCI_DEVICE_ID_CDNS_UDC_USBSSP 0x0400
>
> #define PCI_VENDOR_ID_ARECA 0x17d3
> #define PCI_DEVICE_ID_ARECA_1110 0x1110
>
> ---
> base-commit: 17c7841d09ee7d33557fd075562d9289b6018c90
> change-id: 20260508-no_drd_config-ea76d1df87a3
>
> Best regards,
> --
> Pawel Laszczak <pawell@cadence.com>
>
>
--
Best regards,
Peter
prev parent reply other threads:[~2026-05-09 1:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 10:06 [PATCH v3] usb: cdnsp: Add support for device-only configuration Pawel Laszczak via B4 Relay
2026-05-08 14:42 ` Bjorn Helgaas
2026-05-09 1:31 ` Peter Chen (CIX) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=af6OVX/Rh6YYW1qq@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=rogerq@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox