From: Hyunchul Lee <hyc.lee@gmail.com>
To: DaeMyung Kang <charsyam@gmail.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ntfs: fix copy length in ntfs_bdev_write() for non-page-aligned start
Date: Mon, 4 May 2026 08:43:46 +0900 [thread overview]
Message-ID: <affdssAo783VNm9L@hyunchul-PC02> (raw)
In-Reply-To: <20260502004852.491934-1-charsyam@gmail.com>
On Sat, May 02, 2026 at 09:48:52AM +0900, DaeMyung Kang wrote:
> This is not a normal data I/O hot path. The single in-tree caller is
> the $LogFile emptying path used during read-write mount/remount, and
> the bug only becomes visible on NTFS volumes whose cluster_size is
> strictly smaller than the kernel's PAGE_SIZE (typically 4 KiB on
> x86_64). Per Microsoft's format command documentation, NTFS supports
> allocation unit sizes starting at 512 bytes, so 512 B, 1 KiB and 2 KiB
> clusters are uncommon but valid on-disk configurations. When
> cluster_size >= PAGE_SIZE every "start" passed in is page-aligned and
> the buggy "from != 0" path is never taken.
>
> ntfs_bdev_write() splits the write across one or more block-device
> folios. Inside the loop, "to" is computed as the *end byte offset*
> within the current page (0..PAGE_SIZE), and "from" is the start byte
> offset within the page (reset to 0 from the second iteration onward).
> The copy length should therefore be "to - from", but the current code
> uses "to" directly:
>
> to = min_t(u32, end - offset, PAGE_SIZE);
> memcpy_to_folio(folio, from, buf + buf_off, to);
> buf_off += to;
>
> When "from != 0" (i.e. "start" is not page-aligned) memcpy_to_folio()
> copies "from" extra bytes:
>
> - it reads "from" bytes past the source buffer into kernel heap;
> - it writes "from" bytes past the requested range into the next part
> of the block-device page (or, if "from + to > PAGE_SIZE", past the
> folio boundary entirely, which trips the VM_BUG_ON inside
> memcpy_to_folio() on CONFIG_DEBUG_VM=y kernels).
>
> "buf_off" is then advanced by the wrong amount, so every subsequent
> iteration also reads the source buffer at the wrong offset and writes
> the wrong content to disk.
>
> ntfs_empty_logfile() calls
>
> ntfs_bdev_write(sb, empty_buf, NTFS_CLU_TO_B(vol, lcn),
> vol->cluster_size);
>
> with empty_buf sized to vol->cluster_size. On a sub-PAGE_SIZE-cluster
> volume, any $LogFile run whose LCN is not aligned to
> PAGE_SIZE / cluster_size reaches the non-page-aligned path. The
> over-copy can read beyond empty_buf and overwrite the sectors following
> the requested cluster in the block-device page with unrelated kernel
> heap contents while $LogFile is being emptied.
>
> A userspace reducer of the same arithmetic and copy loop confirms the
> bug under AddressSanitizer: ASan reports a heap-buffer-overflow read
> past the source buffer for the buggy length, and the fixed version is
> ASan-clean.
>
> Compute the copy length as "to - from" and advance buf_off by the same
> amount.
>
> Fixes: 5218cd102aec ("ntfs: update misc operations")
> Link: https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/format
> Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Looks good to me.
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
> ---
> fs/ntfs/bdev-io.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/fs/ntfs/bdev-io.c b/fs/ntfs/bdev-io.c
> index 67e65c88d681..27d7c2767a33 100644
> --- a/fs/ntfs/bdev-io.c
> +++ b/fs/ntfs/bdev-io.c
> @@ -97,6 +97,8 @@ int ntfs_bdev_write(struct super_block *sb, void *buf, loff_t start, size_t size
> idx_end++;
>
> for (; idx < idx_end; idx++, from = 0) {
> + u32 len;
> +
> folio = read_mapping_folio(sb->s_bdev->bd_mapping, idx, NULL);
> if (IS_ERR(folio)) {
> ntfs_error(sb, "Unable to read %ld page", idx);
> @@ -105,9 +107,10 @@ int ntfs_bdev_write(struct super_block *sb, void *buf, loff_t start, size_t size
>
> offset = (loff_t)idx << PAGE_SHIFT;
> to = min_t(u32, end - offset, PAGE_SIZE);
> + len = to - from;
>
> - memcpy_to_folio(folio, from, buf + buf_off, to);
> - buf_off += to;
> + memcpy_to_folio(folio, from, buf + buf_off, len);
> + buf_off += len;
> folio_mark_uptodate(folio);
> folio_mark_dirty(folio);
> folio_put(folio);
> --
> 2.43.0
>
--
Thanks,
Hyunchul
next prev parent reply other threads:[~2026-05-03 23:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-02 0:48 [PATCH] ntfs: fix copy length in ntfs_bdev_write() for non-page-aligned start DaeMyung Kang
2026-05-03 23:43 ` Hyunchul Lee [this message]
2026-05-04 11:00 ` Namjae Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=affdssAo783VNm9L@hyunchul-PC02 \
--to=hyc.lee@gmail.com \
--cc=charsyam@gmail.com \
--cc=linkinjeon@kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox