From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
Mark Featherston <mark@embeddedts.com>,
Kris Bahnsen <kris@embeddedts.com>,
Marek Vasut <marex@nabladev.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] Input: ads7846 - consolidate coordinate filtering logic
Date: Mon, 4 May 2026 21:54:49 -0700 [thread overview]
Message-ID: <afl3WtbabMFNjE24@google.com> (raw)
The ads7846 driver has two separate filtering functions,
ads7846_filter() and ads7846_filter_one(), for the full-duplex and
half-duplex SPI paths, respectively.
They can be consolidated by extracting the core filtering logic for a
single command into a helper function, ads7846_filter_cmd(), which
iterates from l->skip to l->count. The half-duplex setup function is
updated to set l->skip = l->count - 1 so that the helper only processes
the last sample, preserving the original half-duplex behavior.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
Not tested so will appreciate if someone could give it a spin.
drivers/input/touchscreen/ads7846.c | 74 +++++++++++++++--------------
1 file changed, 38 insertions(+), 36 deletions(-)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index d3b529333ca2..093f4b56cc18 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -759,52 +759,54 @@ static bool ads7846_cmd_need_settle(enum ads7846_cmds cmd_idx)
return false;
}
-static int ads7846_filter(struct ads7846 *ts)
+static int ads7846_filter_cmd(struct ads7846 *ts, unsigned int cmd_idx)
{
struct ads7846_packet *packet = ts->packet;
- int action;
- int val;
- unsigned int cmd_idx, b;
+ struct ads7846_buf_layout *l = &packet->l[cmd_idx];
+ unsigned int b;
- packet->ignore = false;
- for (cmd_idx = packet->last_cmd_idx; cmd_idx < packet->cmds - 1; cmd_idx++) {
- struct ads7846_buf_layout *l = &packet->l[cmd_idx];
+ for (b = l->skip; b < l->count; b++) {
+ int val = ads7846_get_value(&packet->rx[l->offset + b]);
- packet->last_cmd_idx = cmd_idx;
+ switch (ts->filter(ts->filter_data, cmd_idx, &val)) {
+ case ADS7846_FILTER_REPEAT:
+ if (b == l->count - 1)
+ return -EAGAIN;
+ break;
- for (b = l->skip; b < l->count; b++) {
- val = ads7846_get_value(&packet->rx[l->offset + b]);
-
- action = ts->filter(ts->filter_data, cmd_idx, &val);
- if (action == ADS7846_FILTER_REPEAT) {
- if (b == l->count - 1)
- return -EAGAIN;
- } else if (action == ADS7846_FILTER_OK) {
- ads7846_set_cmd_val(ts, cmd_idx, val);
- break;
- } else {
- packet->ignore = true;
- return 0;
- }
+ case ADS7846_FILTER_OK:
+ ads7846_set_cmd_val(ts, cmd_idx, val);
+ return 0;
+
+ case ADS7846_FILTER_IGNORE:
+ default:
+ return -EIO;
}
}
- return 0;
+ return -EIO;
}
-static int ads7846_filter_one(struct ads7846 *ts, unsigned int cmd_idx)
+static int ads7846_filter(struct ads7846 *ts)
{
struct ads7846_packet *packet = ts->packet;
- struct ads7846_buf_layout *l = &packet->l[cmd_idx];
- int action, val;
-
- val = ads7846_get_value(&packet->rx[l->offset + l->count - 1]);
- action = ts->filter(ts->filter_data, cmd_idx, &val);
- if (action == ADS7846_FILTER_REPEAT)
- return -EAGAIN;
- else if (action != ADS7846_FILTER_OK)
- return -EIO;
- ads7846_set_cmd_val(ts, cmd_idx, val);
+ unsigned int cmd_idx;
+ int error;
+
+ packet->ignore = false;
+ for (cmd_idx = packet->last_cmd_idx; cmd_idx < packet->cmds - 1; cmd_idx++) {
+ packet->last_cmd_idx = cmd_idx;
+
+ error = ads7846_filter_cmd(ts, cmd_idx);
+ if (error) {
+ if (error == -EAGAIN)
+ return -EAGAIN;
+
+ packet->ignore = true;
+ return 0;
+ }
+ }
+
return 0;
}
@@ -857,7 +859,7 @@ static void ads7846_halfd_read_state(struct ads7846 *ts)
if (msg_idx == ts->msg_count - 1)
break;
- error = ads7846_filter_one(ts, msg_idx);
+ error = ads7846_filter_cmd(ts, msg_idx);
if (error == -EAGAIN) {
continue;
} else if (error) {
@@ -1119,7 +1121,7 @@ static int ads7846_halfd_spi_msg(struct ads7846 *ts,
l->offset = offset;
offset += max_count;
l->count = max_count;
- l->skip = 0;
+ l->skip = max_count - 1;
size += sizeof(*packet->rx) * max_count;
}
--
2.54.0.545.g6539524ca2-goog
--
Dmitry
reply other threads:[~2026-05-05 4:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=afl3WtbabMFNjE24@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=kris@embeddedts.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@nabladev.com \
--cc=mark@embeddedts.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox