The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexandre.belloni@bootlin.com, linux-i3c@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/8] i3c: master: Export i3c_master_enec_disec_locked()
Date: Tue, 12 May 2026 12:31:23 -0400	[thread overview]
Message-ID: <agNV24RoAugbDU2m@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260512121732.406009-8-adrian.hunter@intel.com>

On Tue, May 12, 2026 at 03:17:31PM +0300, Adrian Hunter wrote:
> The existing i3c_master_enec_locked() wrapper always treats a NACKed
> ENEC CCC as a failure (M2 error).  However, broadcasting ENEC to enable
> Hot-Join is legitimately useful even when no I3C devices are currently
> present on the bus, in which case the broadcast will be NACKed and
> should not be reported as an error.
>
> The underlying helper i3c_master_enec_disec_locked() already accepts a
> suppress_m2 flag that lets callers ignore such NACKs.  Expose it so that
> a subsequent patch enabling Hot-Join events can issue ENEC with M2
> suppression.
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/i3c/master.c       | 27 ++++++++++++++++++++++++---
>  include/linux/i3c/master.h |  2 ++
>  2 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 1eb157c8091d..db46cc12c7db 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1121,9 +1121,29 @@ int i3c_master_entdaa_locked(struct i3c_master_controller *master)
>  }
>  EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked);
>
> -static int i3c_master_enec_disec_locked(struct i3c_master_controller *master,
> -					u8 addr, bool enable, u8 evts,
> -					bool suppress_m2)
> +/**
> + * i3c_master_enec_disec_locked() - send an ENEC or DISEC CCC command
> + * @master: master used to send frames on the bus
> + * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
> + * @enable: true to send ENEC, false to send DISEC
> + * @evts: events to enable or disable
> + * @suppress_m2: if true, treat an M2 (NACK) error from the CCC as success
> + *
> + * Send an ENEC or DISEC CCC command to enable or disable some or all events
> + * coming from a specific slave, or all devices if @addr is
> + * %I3C_BROADCAST_ADDR.
> + *
> + * When @suppress_m2 is true, a NACK of the broadcast (which can happen when
> + * no devices are present on the bus) is not reported as an error. This is
> + * useful for callers that want to configure event reporting unconditionally,
> + * regardless of whether any devices are currently on the bus.
> + *
> + * This function must be called with the bus lock held in write mode.
> + *
> + * Return: 0 in case of success, or a negative error code otherwise.
> + */
> +int i3c_master_enec_disec_locked(struct i3c_master_controller *master, u8 addr,
> +				 bool enable, u8 evts, bool suppress_m2)
>  {
>  	struct i3c_ccc_events *events;
>  	struct i3c_ccc_cmd_dest dest;
> @@ -1148,6 +1168,7 @@ static int i3c_master_enec_disec_locked(struct i3c_master_controller *master,
>
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(i3c_master_enec_disec_locked);
>
>  /**
>   * i3c_master_disec_locked() - send a DISEC CCC command
> diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
> index 8cdd7be505d3..e2c831fb5354 100644
> --- a/include/linux/i3c/master.h
> +++ b/include/linux/i3c/master.h
> @@ -607,6 +607,8 @@ int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
>  			    u8 evts);
>  int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
>  			   u8 evts);
> +int i3c_master_enec_disec_locked(struct i3c_master_controller *master, u8 addr,
> +				 bool enable, u8 evts, bool suppress_m2);
>  int i3c_master_entdaa_locked(struct i3c_master_controller *master);
>  int i3c_master_defslvs_locked(struct i3c_master_controller *master);
>
> --
> 2.51.0
>

  reply	other threads:[~2026-05-12 16:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-12 12:17 [PATCH 0/8] i3c: Hot-Join improvements and MIPI HCI Hot-Join support Adrian Hunter
2026-05-12 12:17 ` [PATCH 1/8] i3c: master: Make hot-join workqueue freezable to block hot-join during suspend Adrian Hunter
2026-05-12 16:09   ` Frank Li
2026-05-12 12:17 ` [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock Adrian Hunter
2026-05-12 16:11   ` Frank Li
2026-05-12 19:42     ` David Nyström
2026-05-12 12:17 ` [PATCH 3/8] i3c: master: Consolidate Hot-Join DAA work in the core Adrian Hunter
2026-05-12 16:16   ` Frank Li
2026-05-12 12:17 ` [PATCH 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown Adrian Hunter
2026-05-12 16:27   ` Frank Li
2026-05-12 12:17 ` [PATCH 5/8] i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown Adrian Hunter
2026-05-12 16:30   ` Frank Li
2026-05-12 12:17 ` [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context Adrian Hunter
2026-05-12 16:39   ` Frank Li
2026-05-12 12:17 ` [PATCH 7/8] i3c: master: Export i3c_master_enec_disec_locked() Adrian Hunter
2026-05-12 16:31   ` Frank Li [this message]
2026-05-12 12:17 ` [PATCH 8/8] i3c: mipi-i3c-hci: Add Hot-Join support Adrian Hunter
2026-05-12 16:34   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agNV24RoAugbDU2m@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=adrian.hunter@intel.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox