The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@intel.com>
To: Jinseob Kim <kimjinseob88@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
	linux-iio@vger.kernel.org, David Lechner <dlechner@baylibre.com>,
	Nuno Sa <nuno.sa@analog.com>, Andy Shevchenko <andy@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RFC v3 3/6] iio: osf: add protocol v0 decoding
Date: Wed, 3 Jun 2026 02:07:38 +0300	[thread overview]
Message-ID: <ah9iOlsELRUGNLxv@ashevche-desk.local> (raw)
In-Reply-To: <20260529121005.1470-4-kimjinseob88@gmail.com>

On Fri, May 29, 2026 at 09:10:02PM +0900, Jinseob Kim wrote:
> Add OSF0 frame validation and payload decoders.

> Extend MAINTAINERS to cover the protocol decoder.

Unneeded detail in the commit message. It's implied that MAINTAINERS is updated
accordingly.

...

> +int osf_protocol_decode_frame(const u8 *buf, size_t len,
> +			      struct osf_frame *frame, size_t *frame_len)
> +{
> +	u32 expected_crc;
> +	u32 actual_crc;
> +	u32 payload_len;
> +	size_t total_len;
> +	u8 major;
> +
> +	if (!buf || !frame || !frame_len)
> +		return -EINVAL;
> +
> +	if (len < OSF_FRAME_MIN_LEN)
> +		return -EMSGSIZE;

> +	if (buf[0] != 'O' || buf[1] != 'S' || buf[2] != 'F' || buf[3] != '0')
> +		return -EPROTO;

It's FourCC, define it as integer and compare as integer

#define ..._MAGIC	0xhhhhhhhh	/* OSF0 */

	if (get_unaligned_le32() != _MAGIC)


> +	major = buf[4];
> +	if (major != OSF_PROTOCOL_MAJOR)
> +		return -EPROTO;
> +
> +	if (get_unaligned_le16(buf + 6) != OSF_FRAME_HEADER_LEN)
> +		return -EPROTO;
> +
> +	payload_len = get_unaligned_le32(buf + 10);
> +	if (payload_len > len - OSF_FRAME_MIN_LEN)
> +		return -EMSGSIZE;
> +
> +	if (get_unaligned_le32(buf + 34))
> +		return -EPROTO;
> +
> +	total_len = OSF_FRAME_HEADER_LEN + payload_len + OSF_FRAME_CRC_LEN;
> +	expected_crc = osf_crc32_ieee(buf, OSF_FRAME_HEADER_LEN + payload_len);
> +	actual_crc = get_unaligned_le32(buf + OSF_FRAME_HEADER_LEN + payload_len);
> +
> +	if (actual_crc != expected_crc)
> +		return -EBADMSG;
> +
> +	frame->protocol_minor = buf[5];
> +	frame->message_type = get_unaligned_le16(buf + 8);
> +	frame->payload_len = payload_len;
> +	frame->sequence = get_unaligned_le64(buf + 14);
> +	frame->timestamp_us = get_unaligned_le64(buf + 22);
> +	frame->flags = get_unaligned_le32(buf + 30);
> +	frame->payload = buf + OSF_FRAME_HEADER_LEN;
> +	frame->crc = actual_crc;
> +	*frame_len = total_len;
> +
> +	return 0;
> +}

...

> +int osf_protocol_sensor_sample_value(const struct osf_sensor_sample *sample,
> +				     unsigned int index, s32 *value)
> +{
> +	if (!sample || !sample->samples || !value)
> +		return -EINVAL;
> +
> +	if (index >= sample->channel_count)
> +		return -ERANGE;
> +
> +	*value = (s32)get_unaligned_le32(sample->samples + index * sizeof(s32));

Why casting?

> +	return 0;
> +}

...

> +#define OSF_CAPABILITY_FLAGS_MASK	0x00000003U

GENMASK() ?


-- 
With Best Regards,
Andy Shevchenko



  parent reply	other threads:[~2026-06-02 23:07 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-29 12:09 [PATCH RFC v3 0/6] iio: add Open Sensor Fusion OSF0 UART driver Jinseob Kim
2026-05-29 12:10 ` [PATCH RFC v3 1/6] dt-bindings: iio: add OSF GREEN sensor aggregation device Jinseob Kim
2026-05-29 16:31   ` Conor Dooley
2026-05-29 17:14     ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 2/6] Documentation: iio: add Open Sensor Fusion protocol v0 reference Jinseob Kim
2026-05-31 10:35   ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 3/6] iio: osf: add protocol v0 decoding Jinseob Kim
2026-05-31 10:56   ` Jonathan Cameron
2026-06-02 23:07   ` Andy Shevchenko [this message]
2026-05-29 12:10 ` [PATCH RFC v3 4/6] iio: osf: add stream parser Jinseob Kim
2026-05-29 12:10 ` [PATCH RFC v3 5/6] iio: osf: add UART serdev transport Jinseob Kim
2026-05-31 11:23   ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 6/6] iio: osf: register IIO devices from capabilities Jinseob Kim
2026-05-31 11:42   ` Jonathan Cameron
2026-05-31 10:25 ` [PATCH RFC v3 0/6] iio: add Open Sensor Fusion OSF0 UART driver Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ah9iOlsELRUGNLxv@ashevche-desk.local \
    --to=andriy.shevchenko@intel.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=kimjinseob88@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox