From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Ulf Hansson <ulfh@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
linux-pm@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v4 2/2] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Date: Wed, 1 Jul 2026 09:40:36 -0500 [thread overview]
Message-ID: <akUm5AFBhzNwuA3r@SMW015318> (raw)
In-Reply-To: <20260610-b4-imx8mp-vc8000e-pm-v4-1-v4-2-ea58ce929c84@nxp.com>
On Wed, Jun 10, 2026 at 10:39:11PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Per errata[1]:
> ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
> power up/down cycling.
> Description: VC8000E reset de-assertion edge and AXI clock may have a
> timing issue.
> Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
> both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
> VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
> de-asserted by HW)
>
> Add a bool variable is_errata_err050531 in
> 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
> is needed. If is_errata_err050531 is true, first clear the clk before
> powering up gpc, then enable the clk after powering up gpc.
>
> [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
>
> Fixes: a1a5f15f7f6cb ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
> Cc: stable@vger.kernel.org
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/pmdomain/imx/imx8m-blk-ctrl.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pmdomain/imx/imx8m-blk-ctrl.c b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> index e13a47eeed75..99d100e1d923 100644
> --- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> +++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> @@ -54,6 +54,15 @@ struct imx8m_blk_ctrl_domain_data {
> * register.
> */
> u32 mipi_phy_rst_mask;
> +
> + /*
> + * VC8000E reset de-assertion edge and AXI clock may have a timing issue.
> + * Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
> + * both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
> + * VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
> + * de-asserted by HW)
> + */
> + bool is_errata_err050531;
> };
>
> #define DOMAIN_MAX_CLKS 4
> @@ -108,7 +117,11 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> dev_err(bc->dev, "failed to enable clocks\n");
> goto bus_put;
> }
> - regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
> +
> + if (data->is_errata_err050531)
> + regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
> + else
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
>
> /* power up upstream GPC domain */
> ret = pm_runtime_get_sync(domain->power_dev);
> @@ -117,6 +130,9 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> goto clk_disable;
> }
>
> + if (data->is_errata_err050531)
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
> +
> /* wait for reset to propagate */
> udelay(5);
>
> @@ -511,6 +527,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_vpu_blk_ctl_domain_data[]
> .clk_mask = BIT(2),
> .path_names = (const char *[]){"vc8000e"},
> .num_paths = 1,
> + .is_errata_err050531 = true,
> },
> };
>
>
> --
> 2.51.0
>
>
next prev parent reply other threads:[~2026-07-01 14:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 14:39 [PATCH v4 0/2] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Peng Fan (OSS)
2026-06-10 14:39 ` [PATCH v4 1/2] pmdomain: imx: Fix i.MX8MP power notifier Peng Fan (OSS)
2026-06-10 14:39 ` [PATCH v4 2/2] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Peng Fan (OSS)
2026-07-01 14:40 ` Frank Li [this message]
2026-07-01 10:07 ` [PATCH v4 0/2] " Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=akUm5AFBhzNwuA3r@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=daniel.baluta@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox