public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: David Miller <davem@davemloft.net>
Cc: arnd@arndb.de, linux-kernel@vger.kernel.org,
	peterz@infradead.org, mingo@kernel.org, dingtianhong@huawei.com,
	zhangfei.gao@linaro.org, dan.carpenter@oracle.com,
	netdev@vger.kernel.org
Subject: [patch v2] net: hip04: Make tx coalesce timer actually work
Date: Tue, 14 Apr 2015 21:42:42 +0200 (CEST)	[thread overview]
Message-ID: <alpine.DEB.2.11.1504142140290.3845@nanos> (raw)
In-Reply-To: <20150414.141529.797692010779414843.davem@davemloft.net>

The code sets the expiry value of the timer to a relative value and
starts it with hrtimer_start_expires. That's fine, but that only works
once. The timer is started in relative mode, so the expiry value gets
overwritten with the absolut expiry time (now + expiry).

So once the timer expired, a new call to hrtimer_start_expires results
in an immidiately expired timer, because the expiry value is
already in the past.

Use the proper mechanisms to (re)start the timer in the intended way.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/hisilicon/hip04_eth.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

Index: linux/drivers/net/ethernet/hisilicon/hip04_eth.c
===================================================================
--- linux.orig/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ linux/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -413,6 +413,15 @@ out:
 	return count;
 }
 
+static void hip04_start_tx_timer(struct hip04_priv *priv)
+{
+	unsigned long ns = priv->tx_coalesce_usecs * NSEC_PER_USEC / 2;
+
+	/* allow timer to fire after half the time at the earliest */
+	hrtimer_start_range_ns(&priv->tx_coalesce_timer, ns_to_ktime(ns),
+			       ns, HRTIMER_MODE_REL);
+}
+
 static int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct hip04_priv *priv = netdev_priv(ndev);
@@ -466,8 +475,7 @@ static int hip04_mac_start_xmit(struct s
 		}
 	} else if (!hrtimer_is_queued(&priv->tx_coalesce_timer)) {
 		/* cleanup not pending yet, start a new timer */
-		hrtimer_start_expires(&priv->tx_coalesce_timer,
-				      HRTIMER_MODE_REL);
+		hip04_start_tx_timer(priv);
 	}
 
 	return NETDEV_TX_OK;
@@ -549,7 +557,7 @@ done:
 	/* clean up tx descriptors and start a new timer if necessary */
 	tx_remaining = hip04_tx_reclaim(ndev, false);
 	if (rx < budget && tx_remaining)
-		hrtimer_start_expires(&priv->tx_coalesce_timer, HRTIMER_MODE_REL);
+		hip04_start_tx_timer(priv);
 
 	return rx;
 }
@@ -809,7 +817,6 @@ static int hip04_mac_probe(struct platfo
 	struct hip04_priv *priv;
 	struct resource *res;
 	unsigned int irq;
-	ktime_t txtime;
 	int ret;
 
 	ndev = alloc_etherdev(sizeof(struct hip04_priv));
@@ -846,9 +853,6 @@ static int hip04_mac_probe(struct platfo
 	 */
 	priv->tx_coalesce_frames = TX_DESC_NUM * 3 / 4;
 	priv->tx_coalesce_usecs = 200;
-	/* allow timer to fire after half the time at the earliest */
-	txtime = ktime_set(0, priv->tx_coalesce_usecs * NSEC_PER_USEC / 2);
-	hrtimer_set_expires_range(&priv->tx_coalesce_timer, txtime, txtime);
 	priv->tx_coalesce_timer.function = tx_done;
 
 	priv->map = syscon_node_to_regmap(arg.np);

  reply	other threads:[~2015-04-14 19:42 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-13 21:02 [patch 0/5] hrtimer: Cleanup usage trainwrecks treewide Thomas Gleixner
2015-04-13 21:02 ` [patch 1/5] perf: Fixup hrtimer forward wreckage Thomas Gleixner
2015-04-14 22:10   ` Stephane Eranian
2015-04-13 21:02 ` [patch 2/5] s390: crypto: Protect poll timeout update Thomas Gleixner
2015-04-17 13:27   ` Ingo Tuchscherer
2015-04-13 21:02 ` [patch 3/5] hrtimer: Document hrtimer_forward[_now]() proper Thomas Gleixner
2015-04-22 19:04   ` [tip:timers/core] " tip-bot for Thomas Gleixner
2015-04-13 21:02 ` [patch 4/5] net: hip04: Make tx coalesce timer actually work Thomas Gleixner
2015-04-13 21:24   ` Arnd Bergmann
2015-04-13 21:42     ` Thomas Gleixner
2015-04-13 22:03       ` Arnd Bergmann
2015-04-13 22:08         ` Thomas Gleixner
2015-04-14  7:53           ` Ding Tianhong
2015-04-14 18:15           ` David Miller
2015-04-14 19:42             ` Thomas Gleixner [this message]
2015-04-15  2:24               ` [patch v2] " Ding Tianhong
2015-04-15 10:20               ` Arnd Bergmann
2015-04-15 21:22               ` David Miller
2015-04-13 21:02 ` [patch 5/5] staging: ozwpan: Fix hrtimer wreckage Thomas Gleixner
2015-04-13 21:25   ` Greg Kroah-Hartman
2015-07-20  9:40   ` [tip:timers/core] " tip-bot for Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.11.1504142140290.3845@nanos \
    --to=tglx@linutronix.de \
    --cc=arnd@arndb.de \
    --cc=dan.carpenter@oracle.com \
    --cc=davem@davemloft.net \
    --cc=dingtianhong@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox