From: Julia Lawall <julia.lawall@lip6.fr>
To: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: w.d.hubbs@gmail.com, chris@the-brannons.com,
outreachy-kernel@googlegroups.com, kirk@reisers.ca,
samuel.thibault@ens-lyon.org, gregkh@linuxfoundation.org,
speakup@linux-speakup.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org
Subject: Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Improved code readability
Date: Tue, 14 Mar 2017 10:15:36 +0100 (CET) [thread overview]
Message-ID: <alpine.DEB.2.20.1703141012130.6742@hadrien> (raw)
In-Reply-To: <20170314090626.9314-1-arushisinghal19971997@gmail.com>
On Tue, 14 Mar 2017, Arushi Singhal wrote:
> New variables are added to make the code more readable.
>
> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> ---
> changes in v3
> - improve the patch to make code much more readable.
>
> drivers/staging/sm750fb/ddk750_mode.c | 115 ++++++++++++++++++----------------
> 1 file changed, 61 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> index 25da678179f7..150e5ed0d8ea 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -81,33 +81,34 @@ static int programModeRegisters(struct _mode_parameter_t *pModeParam, struct pll
> if (pll->clockType == SECONDARY_PLL) {
> /* programe secondary pixel clock */
> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> - poke32(CRT_HORIZONTAL_TOTAL,
> - (((pModeParam->horizontal_total - 1) <<
> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->horizontal_display_end - 1) &
> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_HORIZONTAL_SYNC,
> - ((pModeParam->horizontal_sync_width <<
> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> - ((pModeParam->horizontal_sync_start - 1) &
> - CRT_HORIZONTAL_SYNC_START_MASK));
> -
> - poke32(CRT_VERTICAL_TOTAL,
> - (((pModeParam->vertical_total - 1) <<
> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->vertical_display_end - 1) &
> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_VERTICAL_SYNC,
> - ((pModeParam->vertical_sync_height <<
> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> - ((pModeParam->vertical_sync_start - 1) &
> - CRT_VERTICAL_SYNC_START_MASK));
> +
> + unsigned int cht = CRT_HORIZONTAL_TOTAL;
> + unsigned int chttm = CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> + unsigned int phde = pModeParam->horizontal_display_end - 1;
> + unsigned int chtdem = CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> +
> + poke32(cht, (((pModeParam->horizontal_total - 1) << CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) & chttm) | (phde & chtdem));
In the kernel, you should not declare new variables on the fly, within a
block. My point though was that your mapping of variables to values is
not ideal. Give names to larger chunks than just naming constants, as I
put in the example in my previous mail. There is no need to have distinct
names in each case - the names you have are distinct but not memorable
anyway. And don't create code that exceeds 80 characters.
julia
> +
> + unsigned int chs = CRT_HORIZONTAL_SYNC;
> + unsigned int chswm = CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> + unsigned int phss = pModeParam->horizontal_sync_start - 1;
> + unsigned int chssm = CRT_HORIZONTAL_SYNC_START_MASK;
> +
> + poke32(chs, ((pModeParam->horizontal_sync_width << CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) & chswm) | (phss & chssm));
> +
> + unsigned int cvt = CRT_VERTICAL_TOTAL;
> + unsigned int cvttm = CRT_VERTICAL_TOTAL_TOTAL_MASK;
> + unsigned int pvde = pModeParam->vertical_display_end - 1;
> + unsigned int cvtdem = CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
> +
> + poke32(cvt, (((pModeParam->vertical_total - 1) << CRT_VERTICAL_TOTAL_TOTAL_SHIFT) & cvttm) | (pvde & cvtdem));
> +
> + unsigned int cvs = CRT_VERTICAL_SYNC;
> + unsigned int cvshm = CRT_VERTICAL_SYNC_HEIGHT_MASK;
> + unsigned int pvss = pModeParam->vertical_sync_start - 1;
> + unsigned int cvssm = CRT_VERTICAL_SYNC_START_MASK;
> +
> + poke32(cvs, ((pModeParam->vertical_sync_height << CRT_VERTICAL_SYNC_HEIGHT_SHIFT) & cvshm) | (pvss & cvssm));
>
> tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
> if (pModeParam->vertical_sync_polarity)
> @@ -131,33 +132,39 @@ static int programModeRegisters(struct _mode_parameter_t *pModeParam, struct pll
>
> poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
>
> - reg = ((pModeParam->horizontal_total - 1) <<
> - PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> - PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
> - reg |= ((pModeParam->horizontal_display_end - 1) &
> - PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
> - poke32(PANEL_HORIZONTAL_TOTAL, reg);
> -
> - poke32(PANEL_HORIZONTAL_SYNC,
> - ((pModeParam->horizontal_sync_width <<
> - PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> - PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
> - ((pModeParam->horizontal_sync_start - 1) &
> - PANEL_HORIZONTAL_SYNC_START_MASK));
> -
> - poke32(PANEL_VERTICAL_TOTAL,
> - (((pModeParam->vertical_total - 1) <<
> - PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
> - PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->vertical_display_end - 1) &
> - PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(PANEL_VERTICAL_SYNC,
> - ((pModeParam->vertical_sync_height <<
> - PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
> - PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
> - ((pModeParam->vertical_sync_start - 1) &
> - PANEL_VERTICAL_SYNC_START_MASK));
> + unsigned int phttm = PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
> +
> + reg = ((pModeParam->horizontal_total - 1) << PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) & phttm;
> +
> + unsigned int phde = pModeParam->horizontal_display_end - 1;
> + unsigned int phtdem = PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> +
> + reg |= (phde & phtdem);
> +
> + unsigned int pht = PANEL_HORIZONTAL_TOTAL;
> +
> + poke32(pht, reg);
> +
> + unsigned int phs = PANEL_HORIZONTAL_SYNC;
> + unsigned int phswm = PANEL_HORIZONTAL_SYNC_WIDTH_MASK;
> + unsigned int phss = pModeParam->horizontal_sync_start - 1;
> + unsigned int phssm = PANEL_HORIZONTAL_SYNC_START_MASK;
> +
> + poke32(phs, ((pModeParam->horizontal_sync_width << PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) & phswm) | (phss & phssm));
> +
> + unsigned int pvt = PANEL_VERTICAL_TOTAL;
> + unsigned int pvttm = PANEL_VERTICAL_TOTAL_TOTAL_MASK;
> + unsigned int pvde = pModeParam->vertical_display_end - 1;
> + unsigned int pvtdem = PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK;
> +
> + poke32(pvt, (((pModeParam->vertical_total - 1) << PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) & pvttm) | (pvde & pvtdem));
> +
> + unsigned int pvs = PANEL_VERTICAL_SYNC;
> + unsigned int pvshm = PANEL_VERTICAL_SYNC_HEIGHT_MASK;
> + unsigned int pvss = pModeParam->vertical_sync_start - 1;
> + unsigned int pvssm = PANEL_VERTICAL_SYNC_START_MASK;
> +
> + poke32(pvs, ((pModeParam->vertical_sync_height << PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) & pvshm) | (pvss & pvssm));
>
> tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
> if (pModeParam->vertical_sync_polarity)
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170314090626.9314-1-arushisinghal19971997%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
prev parent reply other threads:[~2017-03-14 9:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-14 9:06 [PATCH v3] staging: sm750fb: Improved code readability Arushi Singhal
2017-03-14 9:15 ` Greg KH
2017-03-14 9:15 ` Julia Lawall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.20.1703141012130.6742@hadrien \
--to=julia.lawall@lip6.fr \
--cc=arushisinghal19971997@gmail.com \
--cc=chris@the-brannons.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kirk@reisers.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=samuel.thibault@ens-lyon.org \
--cc=speakup@linux-speakup.org \
--cc=w.d.hubbs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox