From: Meelis Roos <mroos@linux.ee>
To: linux-scsi@vger.kernel.org,
Linux Kernel list <linux-kernel@vger.kernel.org>,
Hannes Reinecke <hare@suse.com>,
"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Subject: UBSAN: Undefined behaviour in drivers/scsi/aic7xxx/aic7xxx_core.c:2831:31
Date: Thu, 12 May 2016 19:02:41 +0300 (EEST) [thread overview]
Message-ID: <alpine.LRH.2.20.1605121859240.4797@math.ut.ee> (raw)
This is from a dual-AthlonMP 32-bit x86 system with onboard Adaptec SCSI
controller, once during bootup.
[ 4.896307] ================================================================================
[ 4.896471] UBSAN: Undefined behaviour in drivers/scsi/aic7xxx/aic7xxx_core.c:2831:31
[ 4.896629] shift exponent -1 is negative
[ 4.896722] CPU: 0 PID: 224 Comm: systemd-udevd Not tainted 4.6.0-rc6-00072-g33656a1 #22
[ 4.896880] Hardware name: Unknown Unknown/S2462 THUNDER K7, BIOS Guinness-8 04/07/2003
[ 4.897038] 00000000 c134beac 00000046 f67a3a88 00000001 c1381f8b f67a3a7c ffffffff
[ 4.897392] c1382516 c1700104 f67a3a8c c1abdf00 00000000 00000002 0000312d f6bed490
[ 4.897746] f6bed490 f67a3acc c10a9259 f6bdc490 f6bdc480 23d798ff 00000001 23d798ff
[ 4.898101] Call Trace:
[ 4.898193] [<c134beac>] ? dump_stack+0x45/0x69
[ 4.898287] [<c1381f8b>] ? ubsan_epilogue+0xb/0x40
[ 4.898382] [<c1382516>] ? __ubsan_handle_shift_out_of_bounds+0xd6/0x120
[ 4.898484] [<c10a9259>] ? sched_clock_local+0x49/0x1b0
[ 4.898581] [<c10546a0>] ? default_send_IPI_mask_allbutself_logical+0x130/0x130
[ 4.898739] [<c1054435>] ? default_send_IPI_single+0x35/0x60
[ 4.898844] [<f810455e>] ? ahc_reset_channel+0x6e/0x370 [aic7xxx]
[ 4.898943] [<c10a14cc>] ? try_to_wake_up+0x3c/0x640
[ 4.899044] [<c1092e9f>] ? __alloc_workqueue_key+0x34f/0x5d0
[ 4.899141] [<c108f270>] ? apply_wqattrs_cleanup.part.28+0x40/0x40
[ 4.899245] [<f810d184>] ? ahc_linux_initialize_scsi_bus+0x54/0x320 [aic7xxx]
[ 4.899404] [<c135e1a2>] ? vsnprintf+0x442/0x8c0
[ 4.899504] [<f80fdd59>] ? ahc_set_name+0x19/0x30 [aic7xxx]
[ 4.899607] [<f810f905>] ? ahc_linux_register_host+0x195/0x270 [aic7xxx]
[ 4.899708] [<c14d0000>] ? cpufreq_governor_dbs+0x500/0xbd0
[ 4.899812] [<f81119ba>] ? ahc_linux_pci_dev_probe+0x11a/0x320 [aic7xxx]
[ 4.899909] [<c123b107>] ? kernfs_add_one+0x147/0x1b0
[ 4.900005] [<c123ada6>] ? kernfs_new_node+0x36/0x80
[ 4.900100] [<c144026c>] ? __pm_runtime_resume+0x3c/0x60
[ 4.900195] [<c1393d71>] ? pci_device_probe+0x91/0x130
[ 4.900284] [<c1431f48>] ? driver_probe_device+0xc8/0x330
[ 4.900284] [<c14321b0>] ? driver_probe_device+0x330/0x330
[ 4.900284] [<c14321b0>] ? driver_probe_device+0x330/0x330
[ 4.900284] [<c1432249>] ? __driver_attach+0x99/0xd0
[ 4.900284] [<c142fb3c>] ? bus_for_each_dev+0x4c/0x90
[ 4.900284] [<c143170a>] ? driver_attach+0x1a/0x40
[ 4.900284] [<c14321b0>] ? driver_probe_device+0x330/0x330
[ 4.900284] [<c1431107>] ? bus_add_driver+0x127/0x290
[ 4.900284] [<f809f000>] ? 0xf809f000
[ 4.900284] [<c1432c67>] ? driver_register+0x67/0x120
[ 4.900284] [<f809f56e>] ? ahc_linux_init+0x56e/0x1000 [aic7xxx]
[ 4.900284] [<c1000413>] ? do_one_initcall+0x73/0x260
[ 4.900284] [<f809f000>] ? 0xf809f000
[ 4.900284] [<c100042a>] ? do_one_initcall+0x8a/0x260
[ 4.900284] [<f809f000>] ? 0xf809f000
[ 4.900284] [<c1144646>] ? free_pages_prepare+0x296/0x590
[ 4.900284] [<c11a2e74>] ? kfree+0x174/0x290
[ 4.900284] [<c113a609>] ? do_init_module+0x15/0x21c
[ 4.900284] [<c113a669>] ? do_init_module+0x75/0x21c
[ 4.900284] [<c11197e1>] ? load_module+0x20e1/0x2d30
[ 4.900284] [<c11b44cc>] ? kernel_read_file+0x11c/0x250
[ 4.900284] [<c111a5bd>] ? SyS_finit_module+0x9d/0xb0
[ 4.900284] [<c1002066>] ? do_fast_syscall_32+0xb6/0x1d0
[ 4.900284] [<c164de9b>] ? sysenter_past_esp+0x40/0x6a
[ 4.900284] ================================================================================
--
Meelis Roos (mroos@linux.ee)
next reply other threads:[~2016-05-12 16:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 16:02 Meelis Roos [this message]
2016-05-12 20:08 ` UBSAN: Undefined behaviour in drivers/scsi/aic7xxx/aic7xxx_core.c:2831:31 James Bottomley
2016-05-12 21:56 ` Ilia Mirkin
2016-05-13 5:26 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LRH.2.20.1605121859240.4797@math.ut.ee \
--to=mroos@linux.ee \
--cc=hare@suse.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox