The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Heming Zhao <heming.zhao@suse.com>
To: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: mark@fasheh.com, jlbec@evilplan.org, hch@lst.de,
	 ocfs2-devel@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v2 1/4] ocfs2: Add new ocfs2_map_blocks() to introduce iomap feature
Date: Sun, 2 Aug 2026 19:28:30 +0800	[thread overview]
Message-ID: <am8oSsQDQrynSXBf@p15> (raw)
In-Reply-To: <7624c381-8c33-4961-bb63-89e21dfcc352@linux.alibaba.com>

Looking at my thunderbird inbox, I noticed the previous mail was formatted
incorrectly. I must have hit the wrong shortcut in neomutt before sending it.
Resending again.

On Tue, Jul 28, 2026 at 01:41:31PM +0800, Joseph Qi wrote:
> 
> 
> On 7/27/26 2:17 PM, Heming Zhao wrote:
> > As part of migrating OCFS2 DIO read/write code paths towards the modern
> > and high-performant iomap framework, this patch introduces an iomap API
> > to replace old high-overhead VFS buffer_head structure paths.
> > 
> > This patch establishes the foundational block mapping routines required by
> > subsequent iomap integration patches. The implementation draws
> > inspiration from ext4_map_blocks().
> > 
> > Signed-off-by: Heming Zhao <heming.zhao@suse.com>
> > ---
> >  fs/ocfs2/aops.c           | 94 +++++++++++++++++++++++++++++++++++++++
> >  fs/ocfs2/aops.h           |  2 +
> >  fs/ocfs2/buffer_head_io.c | 12 -----
> >  fs/ocfs2/ocfs2.h          | 45 ++++++++++++++++++-
> >  4 files changed, 140 insertions(+), 13 deletions(-)
> > 
> > diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
> > index 4acdbb70882c..08df5e3b5196 100644
> > --- a/fs/ocfs2/aops.c
> > +++ b/fs/ocfs2/aops.c
> > @@ -126,6 +126,100 @@ static int ocfs2_lock_get_block(struct inode *inode, sector_t iblock,
> >  	return ret;
> >  }
> >  
> > +int ocfs2_map_blocks(struct inode *inode, struct ocfs2_map_block *map,
> > +		    int flags)
> > +{
> > +	int err = 0;
> > +	unsigned int ext_flags;
> > +	u64 max_blocks = map->len;
> > +	u64 p_blkno, count, past_eof;
> > +	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
> > +	int create = flags & OCFS2_GET_BLOCKS_CREATE;
> > +
> > +	if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE)
> > +		mlog(ML_NOTICE, "map_block on system inode 0x%p (%llu)\n",
> > +		     inode, inode->i_ino);
> > +
> > +	if (S_ISLNK(inode->i_mode)) {
> > +		/*
> > +		 * TODO: refer ocfs2_get_block() to handle
> > +		 * ocfs2_read_folio in the future
> > +		 */
> > +		mlog(ML_NOTICE, "map_block on S_ISLNK file, node 0x%p (%llu)\n",
> > +		     inode, inode->i_ino);
> > +		dump_stack();
> 
> Here mlog and dump_stack() for debug?
> Why not gate behind ML_DEBUG and WARN_ON_ONCE()?
> 

I will follow this suggestion in the next version.

This function shouldn't handle symlink files in the current version.
However, since it derives from ocfs2_get_block() (which handles the S_ISLNK case)
and I eventually plan to replace ocfs2_get_block() with ocfs2_map_blocks(), I
left the WARN here to alert us during the migration. And also notify us when
we call this function on a symlink file.

> > +		goto bail;
> > +	}
> > +
> > +	err = ocfs2_extent_map_get_blocks(inode, map->lblk, &p_blkno, &count,
> > +					  &ext_flags);
> > +	if (err) {
> > +		mlog(ML_ERROR, "get_blocks() failed, inode: 0x%p, "
> > +		     "block: %llu\n", inode, map->lblk);
> > +		goto bail;
> > +	}
> > +
> > +	if (max_blocks < count)
> > +		count = max_blocks;
> > +
> > +	map->pblk = p_blkno;
> > +	map->len = count;
> > +
> > +	/*
> > +	 * ocfs2 never allocates in this function - the only time we
> > +	 * need to use MAP_NEW is when we're extending i_size on a file
> > +	 * system which doesn't support holes, in which case MAP_NEW
> > +	 * allows __block_write_begin() to zero.
> > +	 *
> > +	 * If we see this on a sparse file system, then a truncate has
> > +	 * raced us and removed the cluster. In this case, we clear
> > +	 * the buffers dirty and uptodate bits and let the buffer code
> > +	 * ignore it as a hole.
> > +	 */
> > +	if (create && map->pblk == 0 && ocfs2_sparse_alloc(osb)) {
> > +		map->flags &= ~(OCFS2_MAP_DIRTY | OCFS2_MAP_UPTODATE);
> > +		goto bail;
> > +	}
> > +
> > +	if (p_blkno) {
> > +		if (ext_flags & OCFS2_EXT_UNWRITTEN) {
> > +			map->flags |= OCFS2_MAP_UNWRITTEN;
> > +		} else if (!(ext_flags & OCFS2_EXT_UNWRITTEN)) {
> > +			/* Treat the unwritten extent as a hole for zeroing purposes. */
> > +			map->flags |= OCFS2_MAP_MAPPED;
> > +		} else {
> > +			/* nothing to do */
> > +		}
> > +	}
> 
> It looks odd here. Can simplify to:
> 
> if (ext_flags & OCFS2_EXT_UNWRITTEN)
> 	map->flags |= OCFS2_MAP_UNWRITTEN;
> else
> 	map->flags |= OCFS2_MAP_MAPPED;
> 

I wrote this logic to set up a framework for future code. I added some macro
definitions in ocfs2.h (e.g., OCFS2_MAP_NEW, OCFS2_MAP_NEEDS_VALIDATE, etc.).

I would like to keep the current logic and add a comment like:

   /* TODO: handling other OCFS2_MAP_XX in the future */

Do you agree?

> > +
> > +	if (!ocfs2_sparse_alloc(osb)) {
> > +		if (map->pblk == 0) {
> > +			err = -EIO;
> > +			mlog(ML_ERROR,
> > +			     "iblock = %llu p_blkno = %llu blkno=(%llu)\n",
> > +			     (unsigned long long)map->lblk,
> > +			     (unsigned long long)map->pblk,
> > +			     (unsigned long long)OCFS2_I(inode)->ip_blkno);
> > +			mlog(ML_ERROR, "Size %llu, clusters %u\n",
> > +			     (unsigned long long)i_size_read(inode),
> > +			     OCFS2_I(inode)->ip_clusters);
> > +			dump_stack();
> > +			goto bail;
> > +		}
> > +	}
> > +
> > +	past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
> > +
> > +	if (create && (map->lblk >= past_eof))
> > +		map->flags |= OCFS2_MAP_NEW;
> > +
> > +bail:
> > +	if (err < 0)
> > +		return -EIO;
> 
> Why swallow the error code?
> I'd rather propagate the actual error.
> 

I keep the legacy ocfs2_get_block() logic here.
I have tested the logic where it returns 'err' by xfstests, and the results look
fine.
Will update the return logic in the next version.

Thanks,
Heming

> > +	else
> > +		return map->len;
> > +}
> > +
> >  int ocfs2_get_block(struct inode *inode, sector_t iblock,
> >  		    struct buffer_head *bh_result, int create)
> >  {
> > diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
> > index 114efc9111e4..8dd6edd7c1a1 100644
> > --- a/fs/ocfs2/aops.h
> > +++ b/fs/ocfs2/aops.h
> > @@ -42,6 +42,8 @@ int ocfs2_size_fits_inline_data(struct buffer_head *di_bh, u64 new_size);
> >  
> >  int ocfs2_get_block(struct inode *inode, sector_t iblock,
> >  		    struct buffer_head *bh_result, int create);
> > +int ocfs2_map_blocks(struct inode *inode, struct ocfs2_map_block *map,
> > +		    int flags);
> >  /* all ocfs2_dio_end_io()'s fault */
> >  #define ocfs2_iocb_is_rw_locked(iocb) \
> >  	test_bit(0, (unsigned long *)&iocb->private)
> > diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
> > index 7bfe377af2df..493f2209cca5 100644
> > --- a/fs/ocfs2/buffer_head_io.c
> > +++ b/fs/ocfs2/buffer_head_io.c
> > @@ -23,18 +23,6 @@
> >  #include "buffer_head_io.h"
> >  #include "ocfs2_trace.h"
> >  
> > -/*
> > - * Bits on bh->b_state used by ocfs2.
> > - *
> > - * These MUST be after the JBD2 bits.  Hence, we use BH_JBDPrivateStart.
> > - */
> > -enum ocfs2_state_bits {
> > -	BH_NeedsValidate = BH_JBDPrivateStart,
> > -};
> > -
> > -/* Expand the magic b_state functions */
> > -BUFFER_FNS(NeedsValidate, needs_validate);
> > -
> >  int ocfs2_write_block(struct ocfs2_super *osb, struct buffer_head *bh,
> >  		      struct ocfs2_caching_info *ci)
> >  {
> > diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
> > index 62cad6522c7a..095f7ae5dded 100644
> > --- a/fs/ocfs2/ocfs2.h
> > +++ b/fs/ocfs2/ocfs2.h
> > @@ -509,7 +509,50 @@ struct ocfs2_super
> >  	struct ocfs2_filecheck_sysfs_entry osb_fc_ent;
> >  };
> >  
> > -#define OCFS2_SB(sb)	    ((struct ocfs2_super *)(sb)->s_fs_info)
> > +/*
> > + * Bits on bh->b_state used by ocfs2.
> > + *
> > + * These MUST be after the JBD2 bits.  Hence, we use BH_JBDPrivateStart.
> > + */
> > +enum ocfs2_state_bits {
> > +	BH_NeedsValidate = BH_JBDPrivateStart,
> > +};
> > +
> > +/* Expand the magic b_state functions */
> > +BUFFER_FNS(NeedsValidate, needs_validate);
> > +
> > +/*
> > + * Logical to physical block mapping, used by ocfs2_map_blocks()
> > + *
> > + * This structure is used to pass requests into ocfs2_map_blocks() as
> > + * well as to store the information returned by ocfs2_map_blocks().  It
> > + * takes less room on the stack than a struct buffer_head.
> > + */
> > +#define OCFS2_MAP_NEW			BIT(BH_New)
> > +#define OCFS2_MAP_MAPPED		BIT(BH_Mapped)
> > +#define OCFS2_MAP_UNWRITTEN		BIT(BH_Unwritten)
> > +/* useless? #define OCFS2_MAP_BOUNDARY		BIT(BH_Boundary) */
> > +/* useless? #define OCFS2_MAP_DELAYED		BIT(BH_Delay) */
> > +#define OCFS2_MAP_DIRTY			BIT(BH_Dirty)
> > +#define OCFS2_MAP_UPTODATE		BIT(BH_Uptodate)
> > +#define OCFS2_MAP_NEEDS_VALIDATE	BIT(BH_NeedsValidate)
> > +#define OCFS2_MAP_DEFER_COMPLETION	BIT(BH_Defer_Completion)
> > +#define OCFS2_MAP_FLAGS		(OCFS2_MAP_NEW | OCFS2_MAP_MAPPED |\
> > +				 OCFS2_MAP_DIRTY | OCFS2_MAP_UPTODATE |\
> > +				 OCFS2_MAP_NEEDS_VALIDATE |\
> > +				 OCFS2_MAP_DEFER_COMPLETION)
> > +
> > +struct ocfs2_map_block {
> > +	u64 pblk; /* physical block# */
> > +	u64 lblk; /* logical block# */
> > +	u64 len;  /* number of block */
> > +	unsigned int flags;
> > +};
> > +
> > +/* Flags used by ocfs2_map_blocks() */
> > +#define OCFS2_GET_BLOCKS_CREATE	(0x0001)
> > +
> > +#define OCFS2_SB(sb)	((struct ocfs2_super *)(sb)->s_fs_info)
> >  
> >  /* Useful typedef for passing around journal access functions */
> >  typedef int (*ocfs2_journal_access_func)(handle_t *handle,
> 

  parent reply	other threads:[~2026-08-02 11:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-27  6:17 [RFC PATCH v2 0/4] migrates ocfs2 DIO from buffer_head to iomap Heming Zhao
2026-07-27  6:17 ` [RFC PATCH v2 1/4] ocfs2: Add new ocfs2_map_blocks() to introduce iomap feature Heming Zhao
2026-07-28  5:41   ` Joseph Qi
2026-08-02 10:17     ` Heming Zhao
2026-08-02 11:28     ` Heming Zhao [this message]
2026-07-27  6:17 ` [RFC PATCH v2 2/4] ocfs2: switch dio read path from buffer_head to iomap Heming Zhao
2026-07-28  4:16   ` Christoph Hellwig
2026-08-02 10:30     ` Heming Zhao
2026-07-28  5:50   ` Joseph Qi
2026-08-02 10:36     ` Heming Zhao
2026-07-27  6:17 ` [RFC PATCH v2 3/4] ocfs2: switch dio write " Heming Zhao
2026-07-28  4:18   ` Christoph Hellwig
2026-07-28  6:07   ` Joseph Qi
2026-08-02 10:37     ` Heming Zhao
2026-07-27  6:18 ` [RFC PATCH v2 4/4] ocfs2: remove legacy blockdev direct-IO path APIs Heming Zhao
2026-07-28  4:19   ` Christoph Hellwig
2026-07-28  4:25     ` Heming Zhao
2026-07-28  6:11   ` Joseph Qi
2026-08-02 10:37     ` Heming Zhao
2026-07-28  4:11 ` [RFC PATCH v2 0/4] migrates ocfs2 DIO from buffer_head to iomap Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=am8oSsQDQrynSXBf@p15 \
    --to=heming.zhao@suse.com \
    --cc=hch@lst.de \
    --cc=jlbec@evilplan.org \
    --cc=joseph.qi@linux.alibaba.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark@fasheh.com \
    --cc=ocfs2-devel@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox