From: Sean Christopherson <seanjc@google.com>
To: Yosry Ahmed <yosry@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 10/10] KVM: selftests: Trigger L2->L1 exits stress save+restore and #PF test
Date: Fri, 24 Jul 2026 10:50:42 -0700 [thread overview]
Message-ID: <amOl8kczWlZP_ftH@google.com> (raw)
In-Reply-To: <20260629183746.699840-11-yosry@kernel.org>
On Mon, Jun 29, 2026, Yosry Ahmed wrote:
> Extend the testing coverage in L2 by injecting a #UD into the vCPU every
> other iteration during restore, and intercepting #UD from L1,
> essentially forcing an L2 -> L1 VM-Exit directly after save+restore.
Assuming the #UD is a means to an end, make that the focus of the intro blurb.
I read this changelog without looking at the shortlog, and was about to ask why
injecting a #UD is interesting, and then I saw the comment. It'd be helpful
to add a bit more context too, as it took me a few seconds to piece together
that the goal is to force the exit while L0 has control, i.e. a more obvious
hypercall from L2 wouldn't suffice.
> With this change, the test reliably reproduces the CR2 bug fixed by
> commit 5c247d08bc81 ("KVM: nSVM: Use vcpu->arch.cr2 when updating vmcb12
> on nested #VMEXIT") -- at least on Milan, Genoa, and Turin CPUs.
>
> Assisted-by: Gemini:gemini-3.1-pro
> Signed-off-by: Yosry Ahmed <yosry@kernel.org>
> ---
> .../kvm/x86/stress_save_restore_pf_test.c | 47 +++++++++++++++++--
> 1 file changed, 42 insertions(+), 5 deletions(-)
>
> diff --git a/tools/testing/selftests/kvm/x86/stress_save_restore_pf_test.c b/tools/testing/selftests/kvm/x86/stress_save_restore_pf_test.c
> index 9ab52d27a61d9..2b76e56f744e7 100644
> --- a/tools/testing/selftests/kvm/x86/stress_save_restore_pf_test.c
> +++ b/tools/testing/selftests/kvm/x86/stress_save_restore_pf_test.c
> @@ -105,8 +105,12 @@ static void guest_access_memory(void *arg)
> static void l1_svm_code(struct svm_test_data *svm)
> {
> generic_svm_setup(svm, guest_access_memory);
> - run_guest(svm->vmcb, svm->vmcb_gpa);
> - GUEST_ASSERT(false);
> + svm->vmcb->control.intercept_exceptions |= BIT(UD_VECTOR);
> +
> + while (1) {
> + run_guest(svm->vmcb, svm->vmcb_gpa);
> + GUEST_ASSERT_EQ(svm->vmcb->control.exit_code, (SVM_EXIT_EXCP_BASE + UD_VECTOR));
Please wrap this one, it's so long that I find it genuinely difficult to parse.
GUEST_ASSERT_EQ(svm->vmcb->control.exit_code,
(SVM_EXIT_EXCP_BASE + UD_VECTOR));
> + }
> }
>
> static void l1_vmx_code(struct vmx_pages *vmx)
> @@ -115,13 +119,17 @@ static void l1_vmx_code(struct vmx_pages *vmx)
> GUEST_ASSERT(load_vmcs(vmx));
> prepare_vmcs(vmx, guest_access_memory);
>
> - /* Ignore any #PF */
> - GUEST_ASSERT(!vmwrite(EXCEPTION_BITMAP, BIT(PF_VECTOR)));
> + /* Intercept UD, ignore any #PF */
> + GUEST_ASSERT(!vmwrite(EXCEPTION_BITMAP, BIT(UD_VECTOR) | BIT(PF_VECTOR)));
> GUEST_ASSERT(!vmwrite(PAGE_FAULT_ERROR_CODE_MASK, 0));
> GUEST_ASSERT(!vmwrite(PAGE_FAULT_ERROR_CODE_MATCH, -1));
>
> GUEST_ASSERT(!vmlaunch());
> - GUEST_ASSERT(false);
> + while (1) {
> + GUEST_ASSERT_EQ(vmreadz(VM_EXIT_REASON), EXIT_REASON_EXCEPTION_NMI);
> + GUEST_ASSERT_EQ(vmreadz(VM_EXIT_INTR_INFO) & 0xff, UD_VECTOR);
> + GUEST_ASSERT(!vmresume());
> + }
> }
>
> static void l1_guest_code(void *test_data)
> @@ -159,6 +167,24 @@ static void vcpu_sigusr_ignore(void)
> sigaction(SIGUSR1, &sa, NULL);
> }
>
> +static bool vcpu_state_is_guest_mode(struct kvm_x86_state *state)
> +{
> + return !!(state->nested.flags & KVM_STATE_NESTED_GUEST_MODE);
> +}
> +
> +static void vcpu_state_inject_ud(struct kvm_x86_state *state)
> +{
> + if (state->events.exception.pending || state->events.exception.injected)
> + return;
> +
> + state->events.flags |= KVM_VCPUEVENT_VALID_PAYLOAD;
> + state->events.exception.pending = true;
> + state->events.exception.injected = false;
> + state->events.exception.nr = UD_VECTOR;
> + state->events.exception.has_error_code = false;
> + state->events.exception_has_payload = false;
> +}
> +
> static bool parse_args_nested(int argc, char *argv[])
> {
> bool nested = false;
> @@ -192,10 +218,13 @@ int main(int argc, char *argv[])
> gva_t gva;
> u64 pte;
>
> + TEST_REQUIRE(kvm_has_cap(KVM_CAP_EXCEPTION_PAYLOAD));
But KVM_CAP_EXCEPTION_PAYLOAD _isn't_ required, it's an optional feature. Actually,
this is ridiculous. The test is injecting a #UD, it doesn't have a payload.
Bad AI, bad.
> +
> nested = parse_args_nested(argc, argv);
>
> vm = vm_create_with_one_vcpu(&vcpu, nested ? l1_guest_code : guest_access_memory);
> vm_install_exception_handler(vm, PF_VECTOR, guest_pf_handler);
> + vm_enable_cap(vm, KVM_CAP_EXCEPTION_PAYLOAD, -2ul);
-2ul?
> if (nested) {
> TEST_REQUIRE(kvm_cpu_has(X86_FEATURE_SVM) || kvm_cpu_has(X86_FEATURE_VMX));
> @@ -270,8 +299,16 @@ int main(int argc, char *argv[])
>
> state = vcpu_save_state(vcpu);
>
> + /*
> + * If the vCPU is in guest mode, inject a #UD to trigger an
> + * L2->L1 VM-Exit every other iteration.
> + */
> + if (nested && vcpu_state_is_guest_mode(state) && count % 2 == 0)
Checking "nested" here is unnecessary.
> + vcpu_state_inject_ud(state);
Honestly, I'd rather open code this whole thing, because this doesn't actually
inject a #UD. It _prepares_ state, but doesn't send that into KVM. E.g.
/*
* If the vCPU is in guest mode, inject a #UD to trigger an
* L2->L1 VM-Exit every other iteration, unless the vCPU has. Take care not to
* clobber any exceptions
*/
if ((i & 1) && (state.nested.flags & KVM_STATE_NESTED_GUEST_MODE) &&
!state.events.exception.pending && !state.events.exception.injected) {
state->events.exception.pending = true;
state->events.exception.injected = false;
state->events.exception.nr = UD_VECTOR;
state->events.exception.has_error_code = false;
}
> +
> kvm_vm_release(vm);
> vcpu = vm_recreate_with_one_vcpu(vm);
> + vm_enable_cap(vm, KVM_CAP_EXCEPTION_PAYLOAD, -2ul);
> vcpu_load_state(vcpu, state);
> kvm_x86_state_cleanup(state);
>
> --
> 2.55.0.rc0.799.gd6f94ed593-goog
>
next prev parent reply other threads:[~2026-07-24 17:50 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 18:37 [PATCH v3 00/10] KVM: selftests: Stress save+restore and #PF (ft. nested) Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 01/10] KVM: selftests: Move STR() and XSTR() definitions to test_util.h Yosry Ahmed
2026-07-24 15:26 ` Sean Christopherson
2026-06-29 18:37 ` [PATCH v3 02/10] KVM: selftests: Fix RAX and RFLAGS VMCB offsets when running L2 Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 03/10] KVM: selftests: Use an array for guest_regs (and fix offsets) Yosry Ahmed
2026-07-24 15:33 ` Sean Christopherson
2026-07-24 16:18 ` Yosry Ahmed
2026-07-24 17:03 ` Sean Christopherson
2026-07-24 17:44 ` Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 04/10] KVM: selftests: Move GPR load/save definitions outside of nSVM code Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 05/10] KVM: selftests: Reuse GPR switching logic for nVMX Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 06/10] KVM: selftests: Drop HORRIFIC_L2_UCALL_CLOBBER_HACK Yosry Ahmed
2026-07-24 15:37 ` Sean Christopherson
2026-07-24 16:20 ` Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 07/10] KVM: selftests: Add basic stress test for save+restore and #PF handling Yosry Ahmed
2026-07-24 16:45 ` Sean Christopherson
2026-07-24 17:38 ` Yosry Ahmed
2026-07-24 18:12 ` Sean Christopherson
2026-07-24 18:25 ` Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 08/10] KVM: selftests: Trigger save+restore randomly in the #PF stress test Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 09/10] KVM: selftests: Support running stress save+restore and #PF test in L2 Yosry Ahmed
2026-07-24 17:37 ` Sean Christopherson
2026-07-24 17:40 ` Yosry Ahmed
2026-06-29 18:37 ` [PATCH v3 10/10] KVM: selftests: Trigger L2->L1 exits stress save+restore and #PF test Yosry Ahmed
2026-07-24 17:50 ` Sean Christopherson [this message]
2026-07-24 18:15 ` Yosry Ahmed
2026-07-24 18:25 ` Sean Christopherson
2026-07-24 18:35 ` Yosry Ahmed
2026-07-24 20:32 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amOl8kczWlZP_ftH@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox