From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Zi Yan <ziy@nvidia.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
"Liam R. Howlett" <liam@infradead.org>,
Nico Pache <npache@redhat.com>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>,
Lance Yang <lance.yang@linux.dev>,
Usama Arif <usama.arif@linux.dev>,
Pankaj Raghav <p.raghav@samsung.com>,
Hannes Reinecke <hare@suse.de>, Hugh Dickins <hughd@google.com>,
Yang Shi <shy828301@gmail.com>, Kiryl Shutsemau <kas@kernel.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Hengbin Zhang <uqbarz@gmail.com>,
stable@vger.kernel.org
Subject: Re: [PATCH mm-hotfixes 2/2] mm/huge_memory: fix huge_zero_pfn race
Date: Thu, 30 Jul 2026 10:55:33 +0100 [thread overview]
Message-ID: <amsch6HvEH5IJjfM@lucifer> (raw)
In-Reply-To: <25d560df-6d7e-462a-a987-60a8695793ba@kernel.org>
On Thu, Jul 30, 2026 at 11:22:09AM +0200, David Hildenbrand (Arm) wrote:
> [...]
>
> > So invariants are required - huge_zero_refcount MUST:
> >
> > * Only be set in the huge_zero_lock critical section to ensure
> > serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount
> > writes.
> >
> > * Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values
> > so installation of the huge zero folio on read page fault ensures
> > concurrent is_huge_zero_*() calls correctly identify the huge zero folio.
> >
> > * Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL
> > respectively, and atomically.
> >
> > Establish these by:
> >
> > * Only updating huge_zero_refcount in the huge_zero_lock critical section
> > in get_huge_zero_folio() and shrink_huge_zero_folio_scan().
>
> That is imprecise. huge_zero_refcount is updated (incremented) outside of
> huge_zero_lock in get_huge_zero_folio().
You're right.
->
* Only setting huge_zero_refcount to zero or an absolute value in the
huge_zero_lock critical section in get_huge_zero_folio() and
shrink_huge_zero_folio_scan() and updating atomically elsewhere.
Seems better?
>
> >
> > * Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio()
> > after huge_zero_[pfn, folio] are set. This is paired with
> > atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a
> > non-zero value if huge_zero_[pfn, folio] are set.
>
> That makes sense, yes.
>
> >
> > * Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() to ensure that it
> > is set zero only when equal to 1 and set atomically.
>
> What we already do, yes.
Yup, point is it's part of why the invariant holds.
>
> >
> > * atomic_cmpxchg() being fully ordered ensures this is done prior to
> > huge_zero_[folio, pfn] being set to NULL and ~0UL respectively.
>
> Which is always the case for atomic_cmpxchg() I think, yes.
Yup.
>
> [...]
>
> >
> > @@ -270,7 +272,8 @@ void mm_put_huge_zero_folio(struct mm_struct *mm)
> > static bool get_huge_zero_folio(void)
> > {
> > struct folio *zero_folio;
> > -retry:
> > +
> > + /* Paired with atomic_set_release(). */
> > if (likely(atomic_inc_not_zero(&huge_zero_refcount)))
> > return true;
> >
> > @@ -278,17 +281,21 @@ static bool get_huge_zero_folio(void)
> > if (unlikely(!zero_folio))
> > return false;
> >
> > - preempt_disable();
> > - if (cmpxchg(&huge_zero_folio, NULL, zero_folio)) {
> > - preempt_enable();
> > + /* Paired with critical section in shrink_huge_zero_folio_scan(). */
> > + spin_lock(&huge_zero_lock);
> > + if (huge_zero_folio) {
> > + /* Somebody else already installed it. */
> > + atomic_inc(&huge_zero_refcount);
>
> You replace the retry loop by an atomic_inc() here.
>
> That works now by moving the atomic_cmpxchg() in shrink_huge_zero_folio_scan()
> under the lock as well, so it cannot go away concurrently.
Yup. The retry logic in general would be silly now.
>
> Worth spelling that out in the patch description (unless I missed it).
OK.
>
> > + spin_unlock(&huge_zero_lock);
> > folio_put(zero_folio);
> > - goto retry;
> > + return true;
> > }
> > + WRITE_ONCE(huge_zero_folio, zero_folio);
> > WRITE_ONCE(huge_zero_pfn, folio_pfn(zero_folio));
> > + /* Paired with atomic_inc_not_zero(). +1 for shrinker pin. */
> > + atomic_set_release(&huge_zero_refcount, 2);
>
> Ah, that must now go into the lock as well, otherwise the concurrent
> atomic_inc() would be problematic as well.
Yup. It's all very delicate.
>
> > + spin_unlock(&huge_zero_lock);
> >
> > - /* We take additional reference here. It will be put back by shrinker */
> > - atomic_set(&huge_zero_refcount, 2);
> > - preempt_enable();
> > count_vm_event(THP_ZERO_PAGE_ALLOC);
> > return true;
> > }
> > @@ -312,15 +319,22 @@ static unsigned long shrink_huge_zero_folio_count(struct shrinker *shrink,
> > static unsigned long shrink_huge_zero_folio_scan(struct shrinker *shrink,
> > struct shrink_control *sc)
> > {
> > - if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
> > - struct folio *zero_folio = xchg(&huge_zero_folio, NULL);
> > - BUG_ON(zero_folio == NULL);
> > + struct folio *zero_folio;
> > +
> > + /* Paired with critical section in get_huge_zero_folio(). */
> > + scoped_guard(spinlock, &huge_zero_lock) {
> > + /* Paired with atomic_inc_not_zero() in get_huge_zero_folio(). */
> > + if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) != 1)
> > + return 0;
> > +
> > + zero_folio = huge_zero_folio;
> > + VM_WARN_ON_ONCE(!huge_zero_folio);
> > + WRITE_ONCE(huge_zero_folio, NULL);
> > WRITE_ONCE(huge_zero_pfn, HUGE_ZERO_UNSET_PFN);
> > - folio_put(zero_folio);
> > - return HPAGE_PMD_NR;
> > }
>
> One important point: The folio can't get freed and reallocated before we updated
> huge_zero_folio/huge_zero_pfn I think.
It's non-LRU + set not-rmappable so there's nothing that would do that AFAICT.
>
> The folio_put() should involve a full memory barrier (atomic RMW) and not get
> reordered.
Yeah will mention in commit msg.
>
> So we cannot misclassify the folio in new context as still being the zero folio.
>
> LGTM, thanks!
Thanks!
>
> --
> Cheers,
>
> David
CHeers, Lorenzo
next prev parent reply other threads:[~2026-07-30 9:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-28 12:05 [PATCH mm-hotfixes 0/2] mm/huge_memory: fix huge_zero_pfn race Lorenzo Stoakes (ARM)
2026-07-28 12:05 ` [PATCH mm-hotfixes 1/2] mm/huge_memory: separate out CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic Lorenzo Stoakes (ARM)
2026-07-28 15:08 ` Kiryl Shutsemau
2026-07-28 15:41 ` Lorenzo Stoakes (ARM)
2026-07-28 12:05 ` [PATCH mm-hotfixes 2/2] mm/huge_memory: fix huge_zero_pfn race Lorenzo Stoakes (ARM)
2026-07-30 9:22 ` David Hildenbrand (Arm)
2026-07-30 9:55 ` Lorenzo Stoakes (ARM) [this message]
2026-07-30 12:10 ` David Hildenbrand (Arm)
2026-07-30 13:09 ` Lorenzo Stoakes (ARM)
2026-07-28 19:02 ` [PATCH mm-hotfixes 0/2] " David Hildenbrand (Arm)
2026-07-29 8:15 ` Lorenzo Stoakes (ARM)
2026-07-30 0:55 ` Andrew Morton
2026-07-30 9:05 ` David Hildenbrand (Arm)
2026-07-30 9:15 ` Lorenzo Stoakes (ARM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amsch6HvEH5IJjfM@lucifer \
--to=ljs@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=hare@suse.de \
--cc=hughd@google.com \
--cc=kas@kernel.org \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=npache@redhat.com \
--cc=p.raghav@samsung.com \
--cc=ryan.roberts@arm.com \
--cc=shy828301@gmail.com \
--cc=stable@vger.kernel.org \
--cc=uqbarz@gmail.com \
--cc=usama.arif@linux.dev \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox