The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: "Alvin Šipraga" <alvin.sipraga@analog.com>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Linus Walleij <linusw@kernel.org>,
	Luiz Angelo Daros de Luca <luizluca@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	stable@vger.kernel.org, kernel@pengutronix.de,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH net v1 1/1] net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
Date: Fri, 14 Aug 2026 13:46:30 +0200	[thread overview]
Message-ID: <an7_9DQob7qnKkzX@analog.com> (raw)
In-Reply-To: <20260814110102.2362246-1-o.rempel@pengutronix.de>

On Fri, Aug 14, 2026 at 01:01:02PM +0200, Oleksij Rempel wrote:
> From: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
> the probe path, which may sleep and is not timing-critical.  When the
> reset GPIO is provided by a sleeping controller such as an I2C I/O
> expander, gpiod_set_value() warns:
> 
>   WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
>   Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
>   Workqueue: events_unbound deferred_probe_work_func
>   pc : gpiod_set_value+0x44/0x80
>   lr : rtl83xx_probe+0x1d8/0x3a0
>   Call trace:
>    gpiod_set_value+0x44/0x80 (P)
>    rtl83xx_probe+0x1d8/0x3a0
>    realtek_mdio_probe+0x24/0xa0
>    mdio_probe+0x38/0x78
>    really_probe+0xc4/0x3e0
>    __driver_probe_device+0x15c/0x1b8
>    driver_probe_device+0xb4/0x120
>    __device_attach_driver+0xb8/0x1a0
>    bus_for_each_drv+0x88/0xf0
>    __device_attach+0xa0/0x1d8
>    device_initial_probe+0x54/0x68
>    bus_probe_device+0x38/0xa0
>    deferred_probe_work_func+0xb8/0x120
>    process_one_work+0x184/0x4e8
>    worker_thread+0x188/0x308
>    kthread+0x130/0x150
>    ret_from_fork+0x10/0x20
> 
> Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
> be used without triggering the warning.
> 
> The reset GPIO has been driven with the non-sleeping gpiod_set_value()
> since the driver was added in v4.19.  The call has since been refactored
> across several files - from realtek-smi.c / realtek-mdio.c into the common
> rtl83xx.c module and then into the rtl83xx_reset_assert() and
> rtl83xx_reset_deassert() helpers (both in v6.9).  This patch therefore
> applies as-is only to kernels that carry those helpers (v6.9+); older
> stable kernels need the same gpiod_set_value_cansleep() conversion at the
> corresponding open-coded call sites.
> 
> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
> Cc: <stable@vger.kernel.org> # 6.9.x
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  drivers/net/dsa/realtek/rtl83xx.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>

  reply	other threads:[~2026-08-14 11:46 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14 11:01 [PATCH net v1 1/1] net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO Oleksij Rempel
2026-08-14 11:46 ` Alvin Šipraga [this message]
2026-08-14 14:09 ` Andrew Lunn
2026-08-14 17:00   ` Jakub Kicinski
2026-08-14 20:06 ` Linus Walleij
2026-08-14 20:52 ` Luiz Angelo Daros de Luca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=an7_9DQob7qnKkzX@analog.com \
    --to=alvin.sipraga@analog.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luizluca@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox