Re: [PATCH 2/5] power: supply: bd71828: Fix current direction

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Mon, Aug 10, 2026 at 01:09:07PM +0300, Matti Vaittinen wrote:

> Both the current and the average current registers contain same
> 'direction' -bit to denote the direction of the current. The code
> reading these registers incorrectly caches the direction read from the
> first register, and uses it also for the second.
> 
> Fix this by initializing the direction bit for both register reads.

...

> static int bd71828_get_current_ds_adc(struct bd71828_power *pwr, int *curr, int

>  {
>  	__be16 tmp_curr;
>  	char *tmp = (char *)&tmp_curr;
> -	int dir = 1;
>  	int regs[] = { pwr->regs->ibat, pwr->regs->ibat_avg };
>  	int *vals[] = { curr, curr_avg };
>  	int ret, i;

> -	for (dir = 1, i = 0; i < ARRAY_SIZE(regs); i++) {
> +	for (i = 0; i < ARRAY_SIZE(regs); i++) {


While at it

	for (unsigned int i = 0; i < ARRAY_SIZE(regs); i++) {

> +		int dir = 1;


...and drop it from the top declaration.

-- 
With Best Regards,
Andy Shevchenko