From: Rafael Martinez <rafael@viewpoint.no>
To: venkateshr@ami.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels
Date: Fri, 04 May 2001 10:27:15 +0100 (CEST) [thread overview]
Message-ID: <auto-000000185962@viventus.no> (raw)
In-Reply-To: <002d01c0d3e0$1f4d5270$7253e59b@megatrends.com>
---Reply to mail from Venkatesh Ramamurthy about Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels
> Can you provide the dmesg output of your system after loading the driver
> either successfully or unsucessfully.
>
Successfully: (Raid 5 4x18GB)
------------------------------------------------------
megaraid: v1.14g (Release Date: Feb 5, 2001; 11:42)
megaraid: found 0x101e:0x1960:idx 0:bus 9:slot 0:func 0
scsi3 : Found a MegaRAID controller at 0xf884e000, IRQ: 17
scsi3 : Enabling 64 bit support
megaraid: [G158:3.11] detected 1 logical drives
scsi3 : AMI MegaRAID G158 254 commands 16 targs 2 chans 40 luns
scsi3: scanning channel 1 for devices.
Vendor: ESG-SHV Model: SCA HSBP M9 Rev: 0.10
Type: Processor ANSI SCSI revision: 02
scsi3: scanning channel 2 for devices.
scsi3: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 52527R Rev: G158
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sdb at scsi3, channel 2, id 0, lun 0
SCSI device sdb: 107575296 512-byte hdwr sectors (55079 MB)
sdb: sdb1
-------------------------------------------------------
When it was unsucessfully, it stoppet in the last line with:
sdb: unknown partition table
(With kernel 2.4.2-2smp from redhat (RH7.1) and "official" 2.4.2, 2.4.3)
The only different between the to instalations is the firmware version
C158 --> G158 of the ami card.
The kernel is a 2.4.2-2smp from redhat (RH7.1). I will test the system with an
"official" ;-) kernel today.
Rafael Martinez
---End reply
prev parent reply other threads:[~2001-05-04 8:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-03 15:37 Solution - AMI megaraid driver doesn't work with Linux 2.4.x kernels Rafael Martinez
2001-05-03 14:48 ` Venkatesh Ramamurthy
2001-05-04 9:27 ` Rafael Martinez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=auto-000000185962@viventus.no \
--to=rafael@viewpoint.no \
--cc=linux-kernel@vger.kernel.org \
--cc=venkateshr@ami.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox