From: "H. Peter Anvin" <hpa@zytor.com>
To: linux-kernel@vger.kernel.org
Subject: Re: Linux iSCSI Initiator, OpenSource (fwd) (Re: Gauntlet Set NOW!)
Date: 8 Jan 2003 11:10:44 -0800 [thread overview]
Message-ID: <avht3k$qpo$1@cesium.transmeta.com> (raw)
In-Reply-To: 20030107053146.A16578@kerberos.ncsl.nist.gov
Followup to: <20030107053146.A16578@kerberos.ncsl.nist.gov>
By author: Olivier Galibert <galibert@pobox.com>
In newsgroup: linux.dev.kernel
>
> On Tue, Jan 07, 2003 at 01:39:38PM +1300, Andrew McGregor wrote:
> > Ethernet and TCP were both designed to be cheap to evaluate, not the
> > absolute last word in integrity. There is a move underway to provide an
> > optional stronger TCP digest for IPv6, and if used with that then there is
> > no need for the iSCSI digest. Otherwise, well, play dice with the data.
> > Loaded in your favour, but still dice.
>
> Ethernet's checksum is a standard crc32, with all the usual good
> properties and, at least on FE and lower, 1500bytes max of payload.
> So it's quite reasonable. TCP's checksum, though, is crap.
>
> I'm not entirely sure how crc32 would behave on jumbo frames.
>
AUTODIN-II CRC32 (the one used by Ethernet) is stable up to 11454
bytes. The jumbo frame size was chosen as the largest multiple of the
standard IP payload size to fit within this number.
-hpa
--
<hpa@transmeta.com> at work, <hpa@zytor.com> in private!
"Unix gives you enough rope to shoot yourself in the foot."
http://www.zytor.com/~hpa/puzzle.txt <amsp@zytor.com>
next prev parent reply other threads:[~2003-01-08 19:02 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-05 1:54 Linux iSCSI Initiator, OpenSource (fwd) (Re: Gauntlet Set NOW!) Andre Hedrick
2003-01-05 2:47 ` Andrew Morton
2003-01-05 3:26 ` NEURONET
2003-01-05 4:11 ` NEURONET
2003-01-05 4:41 ` Andre Hedrick
2003-01-05 6:16 ` Andrew Morton
2003-01-06 3:06 ` Oliver Xymoron
2003-01-06 3:38 ` Andre Hedrick
2003-01-06 5:24 ` Oliver Xymoron
2003-01-06 10:24 ` Andrew McGregor
2003-01-06 16:51 ` Roman Zippel
2003-01-07 0:28 ` Andre Hedrick
2003-01-07 20:36 ` Roman Zippel
2003-01-07 22:45 ` Andre Hedrick
2003-01-08 0:04 ` Roman Zippel
2003-01-08 1:43 ` Alan Cox
2003-01-08 1:08 ` Larry McVoy
2003-01-08 16:48 ` Vojtech Pavlik
2003-01-08 19:37 ` Andre Hedrick
2003-01-07 0:39 ` Andrew McGregor
2003-01-07 4:20 ` Oliver Xymoron
2003-01-07 5:38 ` Valdis.Kletnieks
2003-01-07 6:16 ` Werner Almesberger
2003-01-07 6:43 ` Valdis.Kletnieks
2003-01-07 7:08 ` Werner Almesberger
2003-01-07 8:00 ` Valdis.Kletnieks
2003-01-07 8:14 ` Werner Almesberger
2003-01-07 8:41 ` Valdis.Kletnieks
2003-01-07 17:07 ` Werner Almesberger
2003-01-07 12:12 ` Andrew McGregor
2003-01-07 6:45 ` Lincoln Dale
2003-01-07 7:02 ` Valdis.Kletnieks
2003-01-07 11:24 ` Andrew McGregor
2003-01-07 10:31 ` Olivier Galibert
2003-01-08 19:10 ` H. Peter Anvin [this message]
2003-01-08 20:09 ` Andrew McGregor
2003-01-08 20:40 ` Richard B. Johnson
2003-01-07 12:31 ` Alan Cox
2003-01-07 12:31 ` Andrew McGregor
2003-01-07 13:58 ` Alan Cox
2003-01-07 23:09 ` Andrew McGregor
2003-01-07 16:21 ` Oliver Xymoron
2003-01-07 13:04 ` Lionel Bouton
[not found] ` <Pine.LNX.4.10.10301051924140.421-100000@master.linux-ide.o rg>
2003-01-06 7:14 ` Lincoln Dale
2003-01-06 7:53 ` Linux iSCSI Initiator Andre Hedrick
[not found] ` <Pine.LNX.4.10.10301052337150.421-100000@master.linux-ide.o rg>
2003-01-06 9:10 ` Lincoln Dale
2003-01-06 9:28 ` Andre Hedrick
2003-01-06 3:25 ` Linux iSCSI Initiator, OpenSource (fwd) (Re: Gauntlet Set NOW!) Richard Stallman
2003-01-06 4:08 ` Andre Hedrick
2003-01-06 20:49 ` Richard Stallman
-- strict thread matches above, loose matches on Subject: below --
2003-01-05 22:51 Adam J. Richter
[not found] <fa.kccjmvv.13go3jp@ifi.uio.no>
[not found] ` <fa.hjtum4v.fki8p1@ifi.uio.no>
2003-01-08 1:07 ` walt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='avht3k$qpo$1@cesium.transmeta.com' \
--to=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox