From: Frederic Weisbecker <frederic@kernel.org>
To: Eryepa Yerepilov <yerepilov@gmail.com>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Anna-Maria Behnsen <anna-maria@linutronix.de>
Subject: Re: [BUG] timers/nohz: Oops in wake_up_nohz_cpu+0xb with cpumask index -1
Date: Tue, 17 Nov 2026 16:59:31 +0100 [thread overview]
Message-ID: <avx548RXzTkrVRp1@localhost.localdomain> (raw)
In-Reply-To: <179491250540.103352.8910296528541632789@gmail.com>
Le Tue, Nov 17, 2026 at 01:48:25PM +0300, Eryepa Yerepilov a écrit :
> Hi,
>
> Summary: 7.3.4-arch1-1 panicked in idle on CPU 0 inside
> wake_up_nohz_cpu(), reached from __mod_timer() by the clocksource
> watchdog timer. The faulting instruction is a bit test against a static
> cpumask, with the index in RAX = 0xffffffff, i.e. -1.
>
> Full trace, copied from pstore (efi_pstore backend; the journal did not
> survive the panic, the machine rebooted ~10 s later because of
> panic_on_oops=1). Timestamps are seconds since boot, uptime 43040 s:
>
> [43040.869305] BUG: unable to handle page fault for address: ffffffffadef72d8
> [43040.869312] #PF: supervisor read access in kernel mode
> [43040.869315] #PF: error_code(0x0000) - not-present page
> [43040.869318] PGD 47ac25067 P4D 47ac25067 PUD 47ac26063 PMD 0
> [43040.869324] Oops: Oops: 0000 [#1] SMP NOPTI
> [43040.869329] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G OE 7.3.4-arch1-1 #1 PREEMPT(full) 6c50e2b86768c03b0a904a1018778cfad2de7f30
> [43040.869339] RIP: 0010:wake_up_nohz_cpu+0xb/0x160
> [43040.869346] Code: 07 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 0f 1f 44 00 00 89 f8 <48> 0f a3 05 3d ed 72 02 0f 83 da 00 00 00 48 83 ec 10 89 fe 66 90
> [43040.869349] RSP: 0018:ffffcff5c0003dd0 EFLAGS: 00010082
> [43040.869352] RAX: 00000000ffffffff RBX: ffff8d0c0ea1dfc0 RCX: 0000000000000000
> [43040.869355] RDX: 000000001b000000 RSI: ffffffff8e9b66e0 RDI: 00000000ffffffff
> [43040.869357] RBP: ffff8d0c0ea1dfc0 R08: ffff8d0c0ea1dfc0 R09: 00000001028c3160
> [43040.869359] R10: 00001e45a76494c8 R11: 0000000000000009 R12: 0000000000000000
> [43040.869362] R13: 00000001028c315c R14: ffffffff8e9b66e0 R15: 00000000ffffffff
> [43040.869364] FS: 0000000000000000(0000) GS:ffff8d0c80110000(0000) knlGS:0000000000000000
> [43040.869367] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [43040.869369] CR2: ffffffffadef72d8 CR3: 000000019bf59000 CR4: 0000000000f50ef0
> [43040.869372] PKRU: 55555554
> [43040.869374] Call Trace:
> [43040.869376] <IRQ>
> [43040.869378] __mod_timer+0x2b4/0x3a0
> [43040.869384] ? __pfx_clocksource_watchdog+0x10/0x10
> [43040.869389] clocksource_watchdog+0x559/0x590
> [43040.869393] ? __pfx_clocksource_watchdog+0x10/0x10
> [43040.869398] call_timer_fn+0x2a/0x140
> [43040.869402] ? __pfx_clocksource_watchdog+0x10/0x10
> [43040.869405] __run_timers+0x27c/0x330
> [43040.869412] run_timer_softirq+0x46/0xf0
> [43040.869415] ? irqtime_account_irq+0x33/0xd0
> [43040.869419] handle_softirqs+0xde/0x290
> [43040.869429] __irq_exit_rcu+0xb9/0x110
> [43040.869433] sysvec_apic_timer_interrupt+0x71/0x90
> [43040.869438] </IRQ>
> [43040.869440] <TASK>
> [43040.869442] asm_sysvec_apic_timer_interrupt+0x1a/0x20
> [43040.869446] RIP: 0010:cpuidle_enter_state+0xbb/0x400
> [43040.869473] cpuidle_enter+0x31/0x50
> [43040.869477] do_idle+0x1d3/0x2f0
> [43040.869483] cpu_startup_entry+0x29/0x30
> [43040.869487] rest_init+0xf7/0x100
> [43040.869497] start_kernel+0xa0e/0xa20
> [43040.869502] x86_64_start_reservations+0x24/0x30
> [43040.869507] x86_64_start_kernel+0xda/0xe0
> [43040.869511] common_startup_64+0x13e/0x151
> [43040.869519] </TASK>
> [43040.912025] Kernel panic - not syncing: Fatal exception in interrupt
>
> What the registers say
>
> The faulting instruction at wake_up_nohz_cpu+0xb is
>
> 48 0f a3 05 3d ed 72 02 bt %rax,0x272ed3d(%rip)
>
> i.e. a bit test on a static cpumask with the bit index in RAX. RAX and
> RDI both hold 0xffffffff, so the index is -1 and the effective address is
> the mask minus one 8-byte word: the faulting address 0xffffffffadef72d8
> is exactly 8 bytes below the tested mask at 0xffffffffadef72e0. That
> address is above the end of the image (link base 0xffffffff81000000,
> boot offset 0xac00000) and unmapped - hence error_code 0 with PMD 0.
Weird, I scratched my head a lot but I couldn't find what can trigger that,
aside your memory corruption. I could be missing something of course.
Maybe Thomas has an idea.
Thanks.
--
Frederic Weisbecker
SUSE Labs
prev parent reply other threads:[~2026-11-17 15:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 10:48 [BUG] timers/nohz: Oops in wake_up_nohz_cpu+0xb with cpumask index -1 Eryepa Yerepilov
2026-11-17 15:59 ` Frederic Weisbecker [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avx548RXzTkrVRp1@localhost.localdomain \
--to=frederic@kernel.org \
--cc=anna-maria@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=yerepilov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox