The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Cc: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>,
	Jens Wiklander <jenswi@kernel.org>,
	Sumit Garg <sumit.garg@kernel.org>,
	Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
	linux-arm-msm@vger.kernel.org, op-tee@lists.trustedfirmware.org,
	linux-kernel@vger.kernel.org, linux-integrity@vger.kernel.org
Subject: Re: [PATCH v5 2/3] tpm: Introduce Qualcomm TPM driver
Date: Sat, 21 Nov 2026 16:40:27 +0200	[thread overview]
Message-ID: <awGtW0fhoyaDJ0sb@kernel.org> (raw)
In-Reply-To: <awGtGoxtker8a9kG@kernel.org>

On Sat, Nov 21, 2026 at 04:39:26PM +0200, Jarkko Sakkinen wrote:
> On Fri, Nov 20, 2026 at 04:23:33PM +0530, Kuldeep Singh wrote:
> > Add a TPM chip driver for platforms where a TPM 2.0 instance is
> > implemented by a Trusted Application (TA) running in Qualcomm's Trusted
> > Execution Environment (QTEE), reachable over the QCOMTEE object-IPC
> > transport.
> > 
> > The driver discovers the qcom.tz.tpm TEE-bus device, opens a session
> > with the TPM TA, and register with tpm interface. This exposes the TA
> > through the standard /dev/tpm interface and the existing tpm2 command
> > layer. OS need not be aware underlying TPM instance is dTPM or fTPM.
> > 
> > Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
> > ---
> >  drivers/char/tpm/Kconfig    |   9 +
> >  drivers/char/tpm/Makefile   |   1 +
> >  drivers/char/tpm/tpm_qcom.c | 410 ++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 420 insertions(+)
> > 
> > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> > index 5f672f2c01b0..05d704ed3632 100644
> > --- a/drivers/char/tpm/Kconfig
> > +++ b/drivers/char/tpm/Kconfig
> > @@ -243,6 +243,15 @@ config TCG_FTPM_TEE
> >  	help
> >  	  This driver proxies for firmware TPM running in TEE.
> >  
> > +config TCG_QCOM
> > +	tristate "Qualcomm TEE based TPM Interface"
> > +	depends on QCOMTEE
> > +	help
> > +	  This driver provides interface to run TPM instances with Trustzone
> > +	  having Qualcomm TPM TA running in Qualcomm TEE.
> > +	  The mechanism uses the object-IPC based transport provided by
> > +	  QCOMTEE.
> > +
> >  config TCG_SVSM
> >  	tristate "SNP SVSM vTPM interface"
> >  	depends on AMD_MEM_ENCRYPT
> > diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> > index 5b5cdc0d32e4..471cbf49afd2 100644
> > --- a/drivers/char/tpm/Makefile
> > +++ b/drivers/char/tpm/Makefile
> > @@ -45,5 +45,6 @@ obj-$(CONFIG_TCG_CRB) += tpm_crb.o
> >  obj-$(CONFIG_TCG_ARM_CRB_FFA) += tpm_crb_ffa.o
> >  obj-$(CONFIG_TCG_VTPM_PROXY) += tpm_vtpm_proxy.o
> >  obj-$(CONFIG_TCG_FTPM_TEE) += tpm_ftpm_tee.o
> > +obj-$(CONFIG_TCG_QCOM) += tpm_qcom.o
> >  obj-$(CONFIG_TCG_SVSM) += tpm_svsm.o
> >  obj-$(CONFIG_TCG_LOONGSON) += tpm_loongson.o
> > diff --git a/drivers/char/tpm/tpm_qcom.c b/drivers/char/tpm/tpm_qcom.c
> > new file mode 100644
> > index 000000000000..4be939134ea1
> > --- /dev/null
> > +++ b/drivers/char/tpm/tpm_qcom.c
> > @@ -0,0 +1,410 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> > + *
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/sizes.h>
> > +#include <linux/slab.h>
> > +#include <linux/tee.h>
> > +#include <linux/tee_drv.h>
> > +#include <linux/tpm.h>
> > +#include <linux/uuid.h>
> > +
> > +#include "tpm.h"
> > +
> > +#define QCOMTEE_ROOT_OP_REG_WITH_CREDENTIALS	5
> > +#define QCOMTEE_OP_CLIENT_ENV_OPEN		0
> > +#define QCOMTEE_MSG_OBJECT_OP_RELEASE		GENMASK(15, 0)
> > +
> > +#define QCOMTEE_TPM_OP_SEND_COMMAND	0
> > +
> > +/* UID of the "qcom.tz.tpm" service */
> > +#define QCOMTEE_TPM_UID			81
> > +
> > +/* Max buffer size supported by TPM TA */
> > +#define TPM_QCOM_REQ_RSP_SIZE		SZ_4K
> > +
> > +#define QCOMTEE_TPM_GET_TA_VERSION_ID	0x1000U
> > +#define QCOMTEE_TPM_TA_VERSION_MAJOR	GENMASK(31, 16)
> > +#define QCOMTEE_TPM_TA_VERSION_MINOR	GENMASK(15, 0)
> > +
> > +struct tpm_qcom_ta_version_req {
> > +	u32 command_id;
> > +} __packed;
> > +
> > +struct tpm_qcom_ta_version_resp {
> > +	u32 status;
> > +	u32 command_id;
> > +	u32 version_num;
> > +} __packed;
> > +
> > +#define QCOMTEE_TPM_TYPE_ID		0x80000U
> > +#define QCOMTEE_TPM_TYPE_DTPM		0x6454504dU
> > +#define QCOMTEE_TPM_TYPE_FTPM		0x6654504dU
> > +
> > +struct tpm_qcom_type_req {
> > +	u32 command_id;
> > +} __packed;
> > +
> > +struct tpm_qcom_type_resp {
> > +	u32 command_id;
> > +	u32 status;
> > +	u32 tpm_type;
> > +} __packed;
> > +
> > +/*
> > + * dTPM SPI transfer optimization:
> > + * TRANSFER_START before a burst of commands, TRANSFER_END once done.
> > + */
> > +#define QCOMTEE_TPM_TRANSFER_ID		0x2U
> > +#define QCOMTEE_TPM_TRANSFER_END	0
> > +#define QCOMTEE_TPM_TRANSFER_START	1
> > +
> > +struct tpm_qcom_transfer_req {
> > +	u32 command_id;
> > +	u32 transfer_state;
> > +} __packed;
> > +
> > +struct tpm_qcom_transfer_resp {
> > +	u32 command_id;
> > +	u32 status;
> > +} __packed;
> > +
> > +struct tpm_qcom_private {
> > +	struct tpm_chip *chip;
> > +	struct device *dev;
> > +	struct tee_context *ctx;
> > +	struct tee_param_objref tpm_svc_obj;
> > +	bool is_dtpm;
> > +};
> > +
> > +/* UUID of the QTEE-bus device representing the TPM TA. */
> > +static const uuid_t tpm_qcom_uuid =
> > +	UUID_INIT(0xaabcb593, 0x7083, 0x5536,
> > +		  0xac, 0x27, 0x3d, 0x2d, 0x89, 0x41, 0x9d, 0xdb);
> > +
> > +static void tpm_qcom_release_object(struct tee_context *ctx,
> > +				    struct tee_param_objref object)
> > +{
> > +	struct tee_ioctl_object_invoke_arg inv_arg = {};
> > +
> > +	inv_arg.id = object.id;
> > +	inv_arg.op = QCOMTEE_MSG_OBJECT_OP_RELEASE;
> > +	inv_arg.num_params = 0;
> > +
> > +	tee_client_object_invoke_func(ctx, &inv_arg, NULL);
> > +}
> > +
> > +static int tpm_qcom_get_client_env_obj(struct device *dev,
> > +				       struct tee_context *ctx,
> > +				       struct tee_param_objref *client_env_obj)
> > +{
> > +	struct tee_ioctl_object_invoke_arg inv_arg = {};
> > +	struct tee_param param[2] = {};
> > +	int ret;
> > +
> > +	inv_arg.id = TEE_OBJREF_NULL;
> > +	inv_arg.op = QCOMTEE_ROOT_OP_REG_WITH_CREDENTIALS;
> > +	inv_arg.num_params = 2;
> > +
> > +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT;
> > +	param[0].u.objref.id = TEE_OBJREF_NULL;
> > +	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT;
> > +
> > +	ret = tee_client_object_invoke_func(ctx, &inv_arg, param);
> > +	if (ret < 0 || inv_arg.ret != 0) {
> > +		dev_err(dev, "get client env obj failed: ret=%d, invoke_ret=0x%x\n",
> > +			ret, inv_arg.ret);
> > +		return ret ?: -EIO;
> > +	}
> > +
> > +	*client_env_obj = param[1].u.objref;
> > +	return 0;
> > +}
> > +
> > +static int tpm_qcom_get_svc_obj(struct device *dev,
> > +				struct tee_context *ctx,
> > +				struct tee_param_objref client_env_obj,
> > +				struct tee_param_objref *tpm_svc_obj)
> > +{
> > +	struct tee_ioctl_object_invoke_arg inv_arg = {};
> > +	struct tee_param param[2] = {};
> > +	u32 tpm_uid = QCOMTEE_TPM_UID;
> > +	int ret;
> > +
> > +	inv_arg.id = client_env_obj.id;
> > +	inv_arg.op = QCOMTEE_OP_CLIENT_ENV_OPEN;
> > +	inv_arg.num_params = 2;
> > +
> > +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT;
> > +	param[0].u.ubuf = (struct tee_param_ubuf){ .addr = &tpm_uid,
> > +						    .size = sizeof(tpm_uid) };
> > +	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT;
> > +
> > +	ret = tee_client_object_invoke_func(ctx, &inv_arg, param);
> > +	if (ret < 0 || inv_arg.ret != 0) {
> > +		dev_err(dev, "get TPM service obj failed: ret=%d, invoke_ret=0x%x\n",
> > +			ret, inv_arg.ret);
> > +		return ret ?: -EIO;
> > +	}
> > +
> > +	*tpm_svc_obj = param[1].u.objref;
> > +	return 0;
> > +}
> > +
> > +static int tpm_qcom_send_command(struct tpm_qcom_private *pvt_data,
> > +				 void *req, size_t req_len, void *resp,
> > +				 size_t *resp_len)
> > +{
> > +	struct tee_ioctl_object_invoke_arg inv_arg = {};
> > +	struct tee_param param[3] = {};
> > +	u8 locality_arg = 0;
> > +	int ret;
> > +
> > +	inv_arg.id = pvt_data->tpm_svc_obj.id;
> > +	inv_arg.op = QCOMTEE_TPM_OP_SEND_COMMAND;
> > +	inv_arg.num_params = 3;
> > +
> > +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT;
> > +	param[0].u.ubuf = (struct tee_param_ubuf){ .addr = &locality_arg,
> > +						   .size = sizeof(locality_arg) };
> > +	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT;
> > +	param[1].u.ubuf = (struct tee_param_ubuf){ .addr = req, .size = req_len };
> > +	param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_OUTPUT;
> > +	param[2].u.ubuf = (struct tee_param_ubuf){ .addr = resp, .size = *resp_len };
> > +
> > +	ret = tee_client_object_invoke_func(pvt_data->ctx, &inv_arg, param);
> > +	if (ret < 0 || inv_arg.ret != 0) {
> > +		dev_err(pvt_data->dev,
> > +			"send_command invoke ret: %d, err: 0x%x\n",
> > +			ret, inv_arg.ret);
> > +		return ret ?: -EINVAL;
> > +	}
> > +
> > +	*resp_len = param[2].u.ubuf.size;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tpm_qcom_get_ta_details(struct tpm_qcom_private *pvt_data)
> > +{
> > +	struct tpm_qcom_ta_version_req ver_req = {
> > +		.command_id = QCOMTEE_TPM_GET_TA_VERSION_ID,
> > +	};
> > +	struct tpm_qcom_ta_version_resp ver_resp;
> > +	size_t resp_len = sizeof(ver_resp);
> > +	struct tpm_qcom_type_req type_req = {
> > +		.command_id = QCOMTEE_TPM_TYPE_ID,
> > +	};
> > +	struct tpm_qcom_type_resp type_resp;
> > +	int ret;
> > +
> > +	ret = tpm_qcom_send_command(pvt_data, &ver_req, sizeof(ver_req),
> > +				    &ver_resp, &resp_len);
> > +	if (ret < 0 || resp_len < sizeof(ver_resp) || ver_resp.status != 0)
> > +		return ret ?: -EIO;
> > +
> > +	dev_info(pvt_data->dev, "TPM TA version %lu.%lu\n",
> > +		 FIELD_GET(QCOMTEE_TPM_TA_VERSION_MAJOR, ver_resp.version_num),
> > +		 FIELD_GET(QCOMTEE_TPM_TA_VERSION_MINOR, ver_resp.version_num));
> > +
> > +	resp_len = sizeof(type_resp);
> > +	ret = tpm_qcom_send_command(pvt_data, &type_req, sizeof(type_req),
> > +				    &type_resp, &resp_len);
> > +	if (ret < 0 || resp_len < sizeof(type_resp) || type_resp.status != 0)
> > +		return ret ?: -EIO;
> > +
> > +	switch (type_resp.tpm_type) {
> > +	case QCOMTEE_TPM_TYPE_FTPM:
> > +		dev_info(pvt_data->dev, "TPM type: fTPM\n");
> > +		pvt_data->is_dtpm = false;
> > +		break;
> > +	case QCOMTEE_TPM_TYPE_DTPM:
> > +		dev_info(pvt_data->dev, "TPM type: dTPM\n");
> > +		pvt_data->is_dtpm = true;
> > +		break;
> > +	default:
> > +		dev_err(pvt_data->dev, "unsupported TPM type: 0x%08x\n",
> > +			type_resp.tpm_type);
> > +		return -EIO;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/* fTPM does not implement this command and to be invoked via dtpm only. */
> > +static int tpm_qcom_transfer(struct tpm_qcom_private *pvt_data,
> > +			     u32 transfer_state)
> > +{
> > +	struct tpm_qcom_transfer_req req = {
> > +		.command_id = QCOMTEE_TPM_TRANSFER_ID,
> > +		.transfer_state = transfer_state,
> > +	};
> > +	struct tpm_qcom_transfer_resp resp;
> > +	size_t resp_len = sizeof(resp);
> > +	int ret;
> > +
> > +	ret = tpm_qcom_send_command(pvt_data, &req, sizeof(req), &resp,
> > +				    &resp_len);
> > +	if (ret < 0 || resp_len < sizeof(resp) || resp.status != 0)
> > +		return ret ?: -EIO;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tpm_qcom_cmd_ready(struct tpm_chip *chip)
> > +{
> > +	struct tpm_qcom_private *pvt_data = dev_get_drvdata(chip->dev.parent);
> > +
> > +	if (!pvt_data->is_dtpm)
> > +		return 0;
> > +
> > +	return tpm_qcom_transfer(pvt_data, QCOMTEE_TPM_TRANSFER_START);
> > +}
> > +
> > +static int tpm_qcom_go_idle(struct tpm_chip *chip)
> > +{
> > +	struct tpm_qcom_private *pvt_data = dev_get_drvdata(chip->dev.parent);
> > +
> > +	if (!pvt_data->is_dtpm)
> > +		return 0;
> > +
> > +	return tpm_qcom_transfer(pvt_data, QCOMTEE_TPM_TRANSFER_END);
> > +}
> > +
> > +/*
> > + * The raw TPM2 command in @buf is sent directly as send_command's UBUF-in
> > + * param and the raw TPM2 response is read back from its UBUF-out param.
> > + */
> > +static int tpm_qcom_send(struct tpm_chip *chip, u8 *buf, size_t bufsiz,
> > +			 size_t cmd_len)
> > +{
> > +	struct tpm_qcom_private *pvt_data = dev_get_drvdata(chip->dev.parent);
> > +	struct tpm_header *header = (struct tpm_header *)buf;
> > +	size_t resp_len = min_t(size_t, bufsiz, TPM_QCOM_REQ_RSP_SIZE);
> > +	int ret;
> > +
> > +	if (cmd_len > TPM_QCOM_REQ_RSP_SIZE)
> > +		return -EIO;
> > +
> > +	u8 *response __free(kfree) = kzalloc(resp_len, GFP_KERNEL);
> > +	if (!response)
> > +		return -ENOMEM;
> > +
> > +	ret = tpm_qcom_send_command(pvt_data, buf, cmd_len, response, &resp_len);
> > +	if (ret < 0 || resp_len > bufsiz) {
> > +		dev_err(&chip->dev,
> > +			"TPM command failed: cmd_len=%zu, tpm_cc=0x%08x, ret=%d, resp_len=%zu, bufsiz=%zu\n",
> > +			cmd_len, be32_to_cpu(header->ordinal), ret, resp_len, bufsiz);
> > +		return ret ?: -EIO;
> > +	}
> > +
> > +	memcpy(buf, response, resp_len);
> > +	return resp_len;
> > +}
> > +
> > +static const struct tpm_class_ops tpm_qcom_ops = {
> > +	.flags = TPM_OPS_AUTO_STARTUP,
> > +	.send = tpm_qcom_send,
> > +	.cmd_ready = tpm_qcom_cmd_ready,
> > +	.go_idle = tpm_qcom_go_idle,
> > +};
> > +
> > +static int tpm_qcom_ctx_match(struct tee_ioctl_version_data *ver,
> > +			      const void *data)
> > +{
> > +	return (ver->impl_id == TEE_IMPL_ID_QTEE);
> > +}
> > +
> > +static int tpm_qcom_probe(struct tee_client_device *tee_dev)
> > +{
> > +	struct device *dev = &tee_dev->dev;
> > +	struct tpm_qcom_private *pvt_data;
> > +	struct tee_param_objref client_env_obj;
> > +	struct tee_param_objref tpm_svc_obj;
> > +	struct tpm_chip *chip;
> > +	int err;
> > +
> > +	pvt_data = devm_kzalloc(dev, sizeof(*pvt_data), GFP_KERNEL);
> > +	if (!pvt_data)
> > +		return -ENOMEM;
> > +
> > +	pvt_data->dev = dev;
> > +
> > +	pvt_data->ctx = tee_client_open_context(NULL, tpm_qcom_ctx_match, NULL, NULL);
> > +	if (IS_ERR(pvt_data->ctx))
> > +		return dev_err_probe(dev, PTR_ERR(pvt_data->ctx),
> > +				     "tee_client_open_context failed\n");
> > +
> > +	err = tpm_qcom_get_client_env_obj(dev, pvt_data->ctx, &client_env_obj);
> > +	if (err)
> > +		goto out_ctx;
> > +
> > +	err = tpm_qcom_get_svc_obj(dev, pvt_data->ctx, client_env_obj, &tpm_svc_obj);
> > +	/* Release client_env object irrespective of service obj return status */
> > +	tpm_qcom_release_object(pvt_data->ctx, client_env_obj);
> > +	if (err)
> > +		goto out_ctx;
> > +
> > +	pvt_data->tpm_svc_obj = tpm_svc_obj;
> > +	err = tpm_qcom_get_ta_details(pvt_data);
> > +	if (err)
> > +		goto out_svc_obj;
> > +
> > +	chip = tpmm_chip_alloc(dev, &tpm_qcom_ops);
> > +	if (IS_ERR(chip)) {
> > +		err = dev_err_probe(dev, PTR_ERR(chip), "tpmm_chip_alloc failed\n");
> > +		goto out_svc_obj;
> > +	}
> > +
> > +	pvt_data->chip = chip;
> > +	pvt_data->chip->flags |= TPM_CHIP_FLAG_TPM2 | TPM_CHIP_FLAG_SYNC;
> > +	dev_set_drvdata(dev, pvt_data);
> > +
> > +	err = tpm_chip_register(pvt_data->chip);
> > +	if (err) {
> > +		dev_err_probe(dev, err, "tpm_chip_register failed\n");
> > +		goto out_svc_obj;
> > +	}
> > +
> > +	return 0;
> > +
> > +out_svc_obj:
> > +	tpm_qcom_release_object(pvt_data->ctx, tpm_svc_obj);
> > +
> > +out_ctx:
> > +	tee_client_close_context(pvt_data->ctx);
> > +	return err;
> > +}
> > +
> > +static void tpm_qcom_remove(struct tee_client_device *tee_dev)
> > +{
> > +	struct tpm_qcom_private *pvt_data = dev_get_drvdata(&tee_dev->dev);
> > +
> > +	tpm_chip_unregister(pvt_data->chip);
> > +	tpm_qcom_release_object(pvt_data->ctx, pvt_data->tpm_svc_obj);
> > +	tee_client_close_context(pvt_data->ctx);
> > +}
> > +
> > +static const struct tee_client_device_id tpm_qcom_id_table[] = {
> > +	{ tpm_qcom_uuid },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(tee, tpm_qcom_id_table);
> > +
> > +static struct tee_client_driver tpm_qcom_driver = {
> > +	.id_table	= tpm_qcom_id_table,
> > +	.probe		= tpm_qcom_probe,
> > +	.remove		= tpm_qcom_remove,
> > +	.driver		= {
> > +		.name	= "tpm_qcom",
> > +	},
> > +};
> > +
> > +module_tee_client_driver(tpm_qcom_driver);
> > +
> > +MODULE_DESCRIPTION("TPM driver for Qualcomm TPM TA");
> > +MODULE_AUTHOR("Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>");
> 
> MODULE_AUTHOR() field is not that useful and nobody keeps it up to
> date, so you never can rely on it. Not NAK, but just underlining
> how litte it is worth :-)
> 
> Copyright and authorship is anyhow recorded by Git and
> MAINTAINERS document.
> 
> > +MODULE_LICENSE("GPL");
> > 
> > -- 
> > 2.34.1
> 
> 
> > 
> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>

I'm next on holiday but can be pick to "other tree". No need to hold
that for me at least.

Br, Jarkko

  reply	other threads:[~2026-11-21 14:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 10:53 [PATCH v5 0/3] Add TPM support via Qualcomm TEE TPM TA Kuldeep Singh
2026-11-20 10:53 ` [PATCH v5 1/3] tee: qcomtee: Register qcom.tz.tpm service for discovery Kuldeep Singh
2026-11-20 10:53 ` [PATCH v5 2/3] tpm: Introduce Qualcomm TPM driver Kuldeep Singh
2026-11-21 14:39   ` Jarkko Sakkinen
2026-11-21 14:40     ` Jarkko Sakkinen [this message]
2026-11-20 10:53 ` [PATCH v5 3/3] MAINTAINERS: Add Qualcomm TPM driver entry Kuldeep Singh
2026-11-20 13:01 ` [PATCH v5 0/3] Add TPM support via Qualcomm TEE TPM TA Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=awGtW0fhoyaDJ0sb@kernel.org \
    --to=jarkko@kernel.org \
    --cc=amirreza.zarrabi@oss.qualcomm.com \
    --cc=jenswi@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=kuldeep.singh@oss.qualcomm.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=op-tee@lists.trustedfirmware.org \
    --cc=peterhuewe@gmx.de \
    --cc=sumit.garg@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox