Re: [PATCH v2 0/5] media: qcom: iris: encoder feature enhancements

[Neil Armstrong <neil.armstrong@linaro.org>]

Hi,

On 10/31/25 10:50, Wangao Wang wrote:
> Hi All,
> 
> This patch series introduces several enhancements to the Qualcomm Iris
> encoder driver, improving support for V4L2 controls and enabling more
>   video encoding features.
> 
> All patches have been tested with v4l2-compliance, v4l2-ctl and
> on QCS8300 for encoder.
> 
> Commands used for V4l2-ctl validation:
> 
> Scale:
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=width=1280,height=720,pixelformat=H264 \
> --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/scale_720p_output.h264
> 
> Flip:
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=pixelformat=H264 --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/vertical_flip.h264 \
> --set-ctrl vertical_flip=1
> 
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=pixelformat=H264 --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/horizontal_flip.h264 \
> --set-ctrl horizontal_flip=1
> 
> Rotate:
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=pixelformat=H264 --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/rotate90.h264 \
> --set-ctrl rotate=90
> 
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=pixelformat=H264 --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/rotate180.h264 \
> --set-ctrl rotate=180
> 
> v4l2-ctl --verbose -d /dev/video1 \
> --set-fmt-video-out=width=1920,height=1080,pixelformat=NV12 \
> --set-selection-output target=crop,width=1920,height=1080 \
> --set-fmt-video=pixelformat=H264 --stream-mmap --stream-out-mmap \
> --stream-from=input_nv12_1080p.yuv \
> --stream-to=output/rotate270.h264 \
> --set-ctrl rotate=270

I've run this serie on SM8650-HDK, and all test works (+ visually confirmed)
except the rotate90 & rotate270 which fails with:
[  113.494611] qcom-iris aa00000.video-codec: session error received 0x1000005: unknown
printed on dmesg.

Do you know if those operations are supposed to work on the sm8650 hw & fw ?

Neil


<snip>