From: John Duthie <beyondgeek@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: Intel E7221 Server Board SATA
Date: Fri, 29 Apr 2005 17:39:41 +1200 [thread overview]
Message-ID: <b0fbeec405042822394a17a11f@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 514 bytes --]
I have a Server here with no working SATA drives
( Intel Server board SE7221BK1-E )
I've tried 2.6.11 and then 2.6.12-pre3
*grumble intel bleading edge products*
anyway does anyone have any clue or patches that might make this beast
tick (I'm supposed to be installing a file server on Tuesday :( )
if i get really desperate i might have to try the Redhat drivers - but
I don't really want software raid just pain SATA .....
attached is a lspci output
any other info needed ?
TIA
[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 4587 bytes --]
00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 05)
Subsystem: Intel Corp. Server Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
00:02.0 VGA compatible controller: Intel Corp. Graphics Controller (rev 05) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at de00 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dfe80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at de80 [size=32]
00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at df00 [size=32]
00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at df80 [size=32]
00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Intel Corp. I/O Controller Hub USB2
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dff00000-dfffffff
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
Subsystem: Intel Corp. I/O Controller Hub LPC
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fff0 [size=16]
00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
Subsystem: Intel Corp.: Unknown device 3444
Flags: medium devsel, IRQ 10
I/O ports at 0400 [size=32]
01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at ee00 [size=256]
Memory at dffdbc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
Memory at dffe0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ef80 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=04, subordinate=04, sec-latency=48
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
Linux servert 2.6.12-rc3 #1 SMP Thu Apr 29 17:17:10 NZST 2004 i686 unknown unknown GNU/Linux
next reply other threads:[~2005-04-29 5:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-29 5:39 John Duthie [this message]
2005-04-29 13:58 ` Intel E7221 Server Board SATA Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b0fbeec405042822394a17a11f@mail.gmail.com \
--to=beyondgeek@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox