Re: [PATCH] iio: imu: inv_mpu6050: inform the i2c mux core about how it is used

[Jonathan Cameron <jic23@kernel.org>]

On 10/11/16 09:23, Peter Rosin wrote:
> On 2016-09-03 18:30, Jonathan Cameron wrote:
>> On 31/08/16 09:02, Peter Rosin wrote:
>>> The i2c mux core can then take appropriate action depending on if it is
>>> used for an actual i2c mux, or for an arbitrator or gate. In this case
>>> it is used as a gate.
>>>
>>> This will make devicetree bindings simpler when they are eventually
>>> added.
>>>
>>> Signed-off-by: Peter Rosin <peda@axentia.se>
>>> ---
>>>  drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> So, this depends on the i2c-mux-dt-3 branch [1] that Jonathan
>>> pulled to support the new mpu-3050 gyroscope driver. I had
>>> planned to submit this post 4.9-rc1, but since the iio tree
>>> got the prerequisite already, I'm sending it right away.
>> It's not there yet as the mpu-3050 has to go round again
>> for other reasons.  As such I haven't yet pulled your branch.
>> This patch isn't going to justify the pull on it's own.
>>
>> I'll try and remember to pick it up when Linus gets back with
>> the final mpu-3050 and I pull your tree in.
>>
>> If not give me a poke!
> 
> Friendly *poke* :-)
Applied to the togreg branch of iio.git

Thanks for the reminder!

Jonathan
> 
> Cheers,
> Peter
>