Re: [PATCH v1 5/5] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 21/04/2023 02:25, Kuogee Hsieh wrote:
> From: Abhinav Kumar <quic_abhinavk@quicinc.com>
> 
> Add DSC 1.2 hardware blocks to the catalog with necessary
> sub-block and feature flag information.
> Each display compression engine (DCE) contains dual hard
> slice DSC encoders so both share same base address but with
> its own different sub block address.

Please correct line wrapping. 72-75 is usually the preferred width

> 
> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h  | 19 +++++++++++++++++++
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h  | 11 +++++++++++
>   .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h    | 21 +++++++++++++++++++++
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h  | 19 +++++++++++++++++++
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h  | 19 +++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c      | 12 ++++++++++--
>   6 files changed, 99 insertions(+), 2 deletions(-)
> 


[I commented on sm8550, it applies to all the rest of platforms]

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> index 9e40303..72a7bcf 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> @@ -165,6 +165,23 @@ static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
>   	MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
>   };
>   
> +static const struct dpu_dsc_sub_blks sm8550_dsc_sblk_0 = {
> +	.enc = {.base = 0x100, .len = 0x100},
> +	.ctl = {.base = 0xF00, .len = 0x10},
> +};
> +
> +static const struct dpu_dsc_sub_blks sm8550_dsc_sblk_1 = {
> +	.enc = {.base = 0x200, .len = 0x100},
> +	.ctl = {.base = 0xF80, .len = 0x10},
> +};

Please keep sblk in dpu_hw_catalog for now.

> +
> +static const struct dpu_dsc_cfg sm8550_dsc[] = {
> +	DSC_BLK_1_2("dsc_0", DSC_0, 0x80000, 0x100, 0, sm8550_dsc_sblk_0),
> +	DSC_BLK_1_2("dsc_0", DSC_1, 0x80000, 0x100, 0, sm8550_dsc_sblk_1),

Is there a reason why index in "dsc_N" doesn't match the DSC_n which 
comes next to it?

> +	DSC_BLK_1_2("dsc_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), sm8550_dsc_sblk_0),
> +	DSC_BLK_1_2("dsc_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), sm8550_dsc_sblk_1),
> +};
> +
>   static const struct dpu_intf_cfg sm8550_intf[] = {
>   	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
>   	/* TODO TE sub-blocks for intf1 & intf2 */
> @@ -218,6 +235,8 @@ const struct dpu_mdss_cfg dpu_sm8550_cfg = {
>   	.dspp = sm8550_dspp,
>   	.pingpong_count = ARRAY_SIZE(sm8550_pp),
>   	.pingpong = sm8550_pp,
> +	.dsc = sm8550_dsc,
> +	.dsc_count = ARRAY_SIZE(sm8550_dsc),
>   	.merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
>   	.merge_3d = sm8550_merge_3d,
>   	.intf_count = ARRAY_SIZE(sm8550_intf),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 03f162a..be08158 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -1,6 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0-only
>   /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
>    */
>   
>   #define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
> @@ -540,7 +540,15 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
>   	{\
>   	.name = _name, .id = _id, \
>   	.base = _base, .len = 0x140, \
> -	.features = _features, \
> +	.features = BIT(DPU_DSC_HW_REV_1_1) | _features, \
> +	}
> +
> +#define DSC_BLK_1_2(_name, _id, _base, _len, _features, _sblk) \
> +	{\
> +	.name = _name, .id = _id, \
> +	.base = _base, .len = _len, \
> +	.features = BIT(DPU_DSC_HW_REV_1_2) | _features, \
> +	.sblk = &_sblk, \
>   	}
>   
>   /*************************************************************

-- 
With best wishes
Dmitry