From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Hans de Goede <hansg@kernel.org>,
platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] platform/x86: ISST: Check for admin capability for write commands
Date: Tue, 6 Jan 2026 11:49:13 +0200 (EET) [thread overview]
Message-ID: <b402fa2b-0cc8-d39a-6f35-3680ff54407b@linux.intel.com> (raw)
In-Reply-To: <20251229183652.823308-1-srinivas.pandruvada@linux.intel.com>
On Mon, 29 Dec 2025, Srinivas Pandruvada wrote:
> In some SST deployments, administrators want to allow reading SST
> capabilities for non-root users. This can be achieved by changing file
> permissions for "/dev/isst_interface", but they still want to prevent
> any changes to the SST configuration by non-root users.
>
> This capability was available before for non-TPMI SST. Extend the same
> capability for TPMI SST by adding a check for CAP_SYS_ADMIN for all
> write commands.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
> .../x86/intel/speed_select_if/isst_tpmi_core.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c
> index 47026bb3e1af..a624e0b2991f 100644
> --- a/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c
> +++ b/drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c
> @@ -612,7 +612,7 @@ static long isst_if_core_power_state(void __user *argp)
> return -EINVAL;
>
> if (core_power.get_set) {
> - if (power_domain_info->write_blocked)
> + if (power_domain_info->write_blocked || !capable(CAP_SYS_ADMIN))
Hi,
This check doesn't exist in my tree, you seem to have mis-submitted this
independently of the other series that adds the check.
--
i.
> return -EPERM;
>
> _write_cp_info("cp_enable", core_power.enable, SST_CP_CONTROL_OFFSET,
> @@ -659,7 +659,7 @@ static long isst_if_clos_param(void __user *argp)
> return -EINVAL;
>
> if (clos_param.get_set) {
> - if (power_domain_info->write_blocked)
> + if (power_domain_info->write_blocked || !capable(CAP_SYS_ADMIN))
> return -EPERM;
>
> _write_cp_info("clos.min_freq", clos_param.min_freq_mhz,
> @@ -751,7 +751,8 @@ static long isst_if_clos_assoc(void __user *argp)
>
> power_domain_info = &sst_inst->power_domain_info[part][punit_id];
>
> - if (assoc_cmds.get_set && power_domain_info->write_blocked)
> + if (assoc_cmds.get_set && (power_domain_info->write_blocked ||
> + !capable(CAP_SYS_ADMIN)))
> return -EPERM;
>
> offset = SST_CLOS_ASSOC_0_OFFSET +
> @@ -928,7 +929,7 @@ static int isst_if_set_perf_level(void __user *argp)
> if (!power_domain_info)
> return -EINVAL;
>
> - if (power_domain_info->write_blocked)
> + if (power_domain_info->write_blocked || !capable(CAP_SYS_ADMIN))
> return -EPERM;
>
> if (!(power_domain_info->pp_header.allowed_level_mask & BIT(perf_level.level)))
> @@ -988,7 +989,7 @@ static int isst_if_set_perf_feature(void __user *argp)
> if (!power_domain_info)
> return -EINVAL;
>
> - if (power_domain_info->write_blocked)
> + if (power_domain_info->write_blocked || !capable(CAP_SYS_ADMIN))
> return -EPERM;
>
> _write_pp_info("perf_feature", perf_feature.feature, SST_PP_CONTROL_OFFSET,
>
next prev parent reply other threads:[~2026-01-06 9:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-29 18:36 [PATCH] platform/x86: ISST: Check for admin capability for write commands Srinivas Pandruvada
2026-01-06 9:49 ` Ilpo Järvinen [this message]
2026-01-06 23:07 ` srinivas pandruvada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b402fa2b-0cc8-d39a-6f35-3680ff54407b@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=hansg@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox