Re: [PATCH 3/4] arm64: dts: qcom: Add HAMOA-IOT-SOM platform

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

On Wed, Jul 16, 2025 at 05:08:41PM +0800, Yijie Yang wrote:
> The HAMOA-IOT-SOM is a compact computing module that integrates a System
> on Chip (SoC) — specifically the x1e80100 — along with essential
> components optimized for IoT applications. It is designed to be mounted on
> carrier boards, enabling the development of complete embedded systems.
> 
> This change enables and overlays the following components:
> - Regulators on the SOM
> - Reserved memory regions
> - PCIe6a and its PHY
> - PCIe4 and its PHY
> - USB0 through USB6 and their PHYs
> - ADSP, CDSP
> - WLAN, Bluetooth (M.2 interface)
> 
> Written with contributions from Yingying Tang (added PCIe4 and its PHY to
> enable WLAN).
> 
> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 607 ++++++++++++++++++++++++++++
>  1 file changed, 607 insertions(+)
> 

> +&remoteproc_adsp {
> +	firmware-name = "qcom/hamoa-iot/adsp.mbn",
> +			"qcom/hamoa-iot/adsp_dtb.mbn";

Is there a significant difference qcom/x1e80100/adsp.mbn ? If not, can
we use that firmware?

> +
> +	status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +	firmware-name = "qcom/hamoa-iot/cdsp.mbn",
> +			"qcom/hamoa-iot/cdsp_dtb.mbn";
> +
> +	status = "okay";
> +};
> +

-- 
With best wishes
Dmitry