Re: [PATCH v2] iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()

[Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>]

Hi Jonathan,

On 19/05/24 17:59, Jonathan Cameron wrote:
> On Mon, 13 May 2024 13:34:27 -0700
> Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> wrote:
> 
>> When devm_regmap_init_i2c() fails, regmap_ee could be error pointer,
>> instead of checking for IS_ERR(regmap_ee), regmap is checked which looks
>> like a copy paste error.
>>
>> Fixes: a1d1ba5e1c28 ("iio: temperature: mlx90635 MLX90635 IR Temperature sensor")
>> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
> Please make sure to pick up tags given on earlier versions.  You dropped
> Crt's Reviewed-by without giving a reasons. I've put it back.
> 

Sorry, I thought we should not add tags as v1-->v2: is for addressing 
the reviewers(Crt's) comments.

I will keep this in mind.

Thanks,
Harshit

> Applied to the fixes-togreg branch of iio.git and marked for stable.
> I'll be rebasing that on rc1 once available. Until then it won't be visible.
> 
> Thanks,
> 
> Jonathan
> 
>> ---
>> This is found using smatch, only compile tested.
>> v1->v2: Address Crt's comments.
>> ---
>>   drivers/iio/temperature/mlx90635.c | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/iio/temperature/mlx90635.c b/drivers/iio/temperature/mlx90635.c
>> index 1f5c962c1818..f7f88498ba0e 100644
>> --- a/drivers/iio/temperature/mlx90635.c
>> +++ b/drivers/iio/temperature/mlx90635.c
>> @@ -947,9 +947,9 @@ static int mlx90635_probe(struct i2c_client *client)
>>   				     "failed to allocate regmap\n");
>>   
>>   	regmap_ee = devm_regmap_init_i2c(client, &mlx90635_regmap_ee);
>> -	if (IS_ERR(regmap))
>> -		return dev_err_probe(&client->dev, PTR_ERR(regmap),
>> -				     "failed to allocate regmap\n");
>> +	if (IS_ERR(regmap_ee))
>> +		return dev_err_probe(&client->dev, PTR_ERR(regmap_ee),
>> +				     "failed to allocate EEPROM regmap\n");
>>   
>>   	mlx90635 = iio_priv(indio_dev);
>>   	i2c_set_clientdata(client, indio_dev);
>