The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Stanimir Varbanov <stanimir.varbanov@linaro.org>
To: Vinod Koul <vinod.koul@linaro.org>,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Matt Mackall <mpm@selenic.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-arm-msm@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
	Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH v2 2/2] hwrng: msm - Add support for prng v2
Date: Tue, 19 Jun 2018 15:11:33 +0300	[thread overview]
Message-ID: <b7543a73-e35a-c015-3bba-1e3ab3a389d5@linaro.org> (raw)
In-Reply-To: <20180619095430.26358-3-vkoul@kernel.org>

Hi Vinod,

On 06/19/2018 12:54 PM, Vinod Koul wrote:
> Qcom 8996 and later chips support prng v2 which requires to
> implement only .read callback for hwrng.
> 
> This version of chip has multiple Execution Environments (EE) and
> secure world is typically responsible for configuring the prng.
> 
> Add driver data for qcom,prng as 0 and qcom,prng-v2 as 1 and use
> that to skip initialization and cleanup routines.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  drivers/char/hw_random/msm-rng.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c
> index 841fee845ec9..4676520e1f16 100644
> --- a/drivers/char/hw_random/msm-rng.c
> +++ b/drivers/char/hw_random/msm-rng.c
> @@ -17,6 +17,7 @@
>  #include <linux/io.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  
>  /* Device specific register offsets */
> @@ -131,6 +132,7 @@ static int msm_rng_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
>  	struct msm_rng *rng;
> +	unsigned int skip_init;
>  	int ret;
>  
>  	rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
> @@ -149,9 +151,12 @@ static int msm_rng_probe(struct platform_device *pdev)
>  		return PTR_ERR(rng->clk);
>  
>  	rng->hwrng.name = KBUILD_MODNAME,
> -	rng->hwrng.init = msm_rng_init,
> -	rng->hwrng.cleanup = msm_rng_cleanup,
> -	rng->hwrng.read = msm_rng_read,
> +	rng->hwrng.read = msm_rng_read;
> +	skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);

skip_init is unsigned int, despite I think you don't need to cast it.

> +	if (!skip_init) {
> +		rng->hwrng.init = msm_rng_init;
> +		rng->hwrng.cleanup = msm_rng_cleanup;
> +	}
>  
>  	ret = devm_hwrng_register(&pdev->dev, &rng->hwrng);
>  	if (ret) {
> @@ -163,7 +168,8 @@ static int msm_rng_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id msm_rng_of_match[] = {
> -	{ .compatible = "qcom,prng", },
> +	{ .compatible = "qcom,prng", .data = (void *)0},
> +	{ .compatible = "qcom,prng-v2", .data = (void *)1},

No need to cast. IMO it'd be better to create defines for these numbers:

#define PRNG_V1	0
#define PRNG_V2	1


-- 
regards,
Stan

  reply	other threads:[~2018-06-19 12:11 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-19  9:54 [PATCH v2 0/2] hwrng: Add support for qcpm v2 hwrng Vinod Koul
2018-06-19  9:54 ` [PATCH v2 1/2] dt-bindings: rng: Add new compatible qcom,prng-v2 Vinod Koul
2018-06-25 19:06   ` Rob Herring
2018-06-26 15:27     ` Vinod
2018-06-19  9:54 ` [PATCH v2 2/2] hwrng: msm - Add support for prng v2 Vinod Koul
2018-06-19 12:11   ` Stanimir Varbanov [this message]
2018-06-19 12:31     ` Vinod
2018-06-19 14:30   ` Herbert Xu
2018-06-20  5:58   ` Stephen Boyd
2018-06-20 13:37     ` Vinod
2018-06-22  1:22       ` Stephen Boyd
2018-06-21 15:17 ` [PATCH v2 0/2] hwrng: Add support for qcpm v2 hwrng Timur Tabi
2018-06-22  4:27   ` Vinod
2018-06-22  4:30     ` Timur Tabi
2018-06-22  4:50       ` Vinod

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b7543a73-e35a-c015-3bba-1e3ab3a389d5@linaro.org \
    --to=stanimir.varbanov@linaro.org \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpm@selenic.com \
    --cc=swboyd@chromium.org \
    --cc=vinod.koul@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox