[BUG] brcmfmac locks up on resume from suspend

[Dmitry Osipenko <digetx@gmail.com>]

Hi,

I'm getting a hang on resume from suspend using today's next-20210618.
It's tested on Tegra20 Acer A500 that has older BCM4329, but seems the
problem is generic.

There is this line in pstore log:

  ieee80211 phy0: brcmf_netdev_start_xmit: xmit rejected state=0

Steps to reproduce:

1. Boot system
2. Connect WiFi
3. Run "rtcwake -s10 -mmem"

What's interesting is that turning WiFi off/on before suspending makes
resume to work and there are no suspicious messages in KMSG, all further
resumes work too.

This change fixes the hang:

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index db5f8535fdb5..06d16f7776c7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -301,7 +301,6 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct
sk_buff *skb,
 	/* Can the device send data? */
 	if (drvr->bus_if->state != BRCMF_BUS_UP) {
 		bphy_err(drvr, "xmit rejected state=%d\n", drvr->bus_if->state);
-		netif_stop_queue(ndev);
 		dev_kfree_skb(skb);
 		ret = -ENODEV;
 		goto done;
8<---

Comments? Suggestions? Thanks in advance.