[PATCH v7 0/3] update live migration configuration region

[PATCH v7 0/3] update live migration configuration region

[Longfang Liu]

On the new hardware platform, the configuration register space
of the live migration function is set on the PF, while on the
old platform, this part is placed on the VF.

Change v6 -> v7
	Update the comment of the live migration configuration scheme.

Change v5 -> v6
	Update VF device properties

Change v4 -> v5
	Remove BAR length alignment

Change v3 -> v4
	Rebase on kernel 6.15

Change v2 -> v3
	Put the changes of Pre_Copy into another bugfix patchset.

Change v1 -> v2
	Delete the vf_qm_state read operation in Pre_Copy

Longfang Liu (3):
  migration: update BAR space size
  migration: qm updates BAR configuration
  migration: adapt to new migration configuration

 drivers/crypto/hisilicon/qm.c                 |  29 +++
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 200 ++++++++++++------
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |   7 +
 3 files changed, 174 insertions(+), 62 deletions(-)

-- 
2.24.0

[PATCH v7 1/3] migration: update BAR space size

[Longfang Liu]

On new platforms greater than QM_HW_V3, the live migration configuration
region is moved from VF to PF. The VF's own configuration space is
restored to the complete 64KB, and there is no need to divide the
size of the BAR configuration space equally.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 36 ++++++++++++++-----
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 397f5e445136..ddb3fd4df5aa 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -1250,6 +1250,28 @@ static struct hisi_qm *hisi_acc_get_pf_qm(struct pci_dev *pdev)
 	return !IS_ERR(pf_qm) ? pf_qm : NULL;
 }
 
+static size_t hisi_acc_get_resource_len(struct vfio_pci_core_device *vdev,
+					unsigned int index)
+{
+	struct hisi_acc_vf_core_device *hisi_acc_vdev =
+			hisi_acc_drvdata(vdev->pdev);
+
+	/*
+	 * On the old HW_V3 device, the ACC VF device BAR2
+	 * region encompasses both functional register space
+	 * and migration control register space.
+	 * only the functional region should be report to Guest.
+	 */
+	if (hisi_acc_vdev->pf_qm->ver == QM_HW_V3)
+		return (pci_resource_len(vdev->pdev, index) >> 1);
+	/*
+	 * On the new HW device, the migration control register
+	 * has been moved to the PF device BAR2 region.
+	 * The VF device BAR2 is entirely functional register space.
+	 */
+	return pci_resource_len(vdev->pdev, index);
+}
+
 static int hisi_acc_pci_rw_access_check(struct vfio_device *core_vdev,
 					size_t count, loff_t *ppos,
 					size_t *new_count)
@@ -1260,8 +1282,9 @@ static int hisi_acc_pci_rw_access_check(struct vfio_device *core_vdev,
 
 	if (index == VFIO_PCI_BAR2_REGION_INDEX) {
 		loff_t pos = *ppos & VFIO_PCI_OFFSET_MASK;
-		resource_size_t end = pci_resource_len(vdev->pdev, index) / 2;
+		resource_size_t end;
 
+		end = hisi_acc_get_resource_len(vdev, index);
 		/* Check if access is for migration control region */
 		if (pos >= end)
 			return -EINVAL;
@@ -1282,8 +1305,9 @@ static int hisi_acc_vfio_pci_mmap(struct vfio_device *core_vdev,
 	index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
 	if (index == VFIO_PCI_BAR2_REGION_INDEX) {
 		u64 req_len, pgoff, req_start;
-		resource_size_t end = pci_resource_len(vdev->pdev, index) / 2;
+		resource_size_t end;
 
+		end = hisi_acc_get_resource_len(vdev, index);
 		req_len = vma->vm_end - vma->vm_start;
 		pgoff = vma->vm_pgoff &
 			((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
@@ -1330,7 +1354,6 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
 	if (cmd == VFIO_DEVICE_GET_REGION_INFO) {
 		struct vfio_pci_core_device *vdev =
 			container_of(core_vdev, struct vfio_pci_core_device, vdev);
-		struct pci_dev *pdev = vdev->pdev;
 		struct vfio_region_info info;
 		unsigned long minsz;
 
@@ -1345,12 +1368,7 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
 		if (info.index == VFIO_PCI_BAR2_REGION_INDEX) {
 			info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
 
-			/*
-			 * ACC VF dev BAR2 region consists of both functional
-			 * register space and migration control register space.
-			 * Report only the functional region to Guest.
-			 */
-			info.size = pci_resource_len(pdev, info.index) / 2;
+			info.size = hisi_acc_get_resource_len(vdev, info.index);
 
 			info.flags = VFIO_REGION_INFO_FLAG_READ |
 					VFIO_REGION_INFO_FLAG_WRITE |
-- 
2.24.0

[PATCH v7 2/3] migration: qm updates BAR configuration

[Longfang Liu]

On new platforms greater than QM_HW_V3, the configuration region for the
live migration function of the accelerator device is no longer
placed in the VF, but is instead placed in the PF.

Therefore, the configuration region of the live migration function
needs to be opened when the QM driver is loaded. When the QM driver
is uninstalled, the driver needs to clear this configuration.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/hisilicon/qm.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 7c41f9593d03..b5ce9b1e9c56 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -242,6 +242,9 @@
 #define QM_QOS_MAX_CIR_U		6
 #define QM_AUTOSUSPEND_DELAY		3000
 
+#define QM_MIG_REGION_SEL		0x100198
+#define QM_MIG_REGION_EN		0x1
+
  /* abnormal status value for stopping queue */
 #define QM_STOP_QUEUE_FAIL		1
 #define	QM_DUMP_SQC_FAIL		3
@@ -3004,11 +3007,36 @@ static void qm_put_pci_res(struct hisi_qm *qm)
 	pci_release_mem_regions(pdev);
 }
 
+static void hisi_mig_region_clear(struct hisi_qm *qm)
+{
+	u32 val;
+
+	/* Clear migration region set of PF */
+	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
+		val = readl(qm->io_base + QM_MIG_REGION_SEL);
+		val &= ~BIT(0);
+		writel(val, qm->io_base + QM_MIG_REGION_SEL);
+	}
+}
+
+static void hisi_mig_region_enable(struct hisi_qm *qm)
+{
+	u32 val;
+
+	/* Select migration region of PF */
+	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
+		val = readl(qm->io_base + QM_MIG_REGION_SEL);
+		val |= QM_MIG_REGION_EN;
+		writel(val, qm->io_base + QM_MIG_REGION_SEL);
+	}
+}
+
 static void hisi_qm_pci_uninit(struct hisi_qm *qm)
 {
 	struct pci_dev *pdev = qm->pdev;
 
 	pci_free_irq_vectors(pdev);
+	hisi_mig_region_clear(qm);
 	qm_put_pci_res(qm);
 	pci_disable_device(pdev);
 }
@@ -5630,6 +5658,7 @@ int hisi_qm_init(struct hisi_qm *qm)
 		goto err_free_qm_memory;
 
 	qm_cmd_init(qm);
+	hisi_mig_region_enable(qm);
 
 	return 0;
 
-- 
2.24.0

[PATCH v7 3/3] migration: adapt to new migration configuration

[Longfang Liu]

On new platforms greater than QM_HW_V3, the migration region has been
relocated from the VF to the PF. The driver must also be modified
accordingly to adapt to the new hardware device.

On the older hardware platform QM_HW_V3, the live migration configuration
region is placed in the latter 32K portion of the VF's BAR2 configuration
space. On the new hardware platform QM_HW_V4, the live migration
configuration region also exists in the same 32K area immediately following
the VF's BAR2, just like on QM_HW_V3.

However, access to this region is now controlled by hardware. Additionally,
a copy of the live migration configuration region is present in the PF's BAR2
configuration space. On the new hardware platform QM_HW_V4, when an older
version of the driver is loaded, it behaves like QM_HW_V3 and uses the
configuration region in the VF, ensuring that the live migration function
continues to work normally. When the new version of the driver is loaded,
it directly uses the configuration region in the PF. Meanwhile, hardware
configuration disables the live migration configuration region in the VF's
BAR2: reads return all 0xF values, and writes are silently ignored.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 164 ++++++++++++------
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |   7 +
 2 files changed, 118 insertions(+), 53 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index ddb3fd4df5aa..a20785bcea62 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -125,6 +125,72 @@ static int qm_get_cqc(struct hisi_qm *qm, u64 *addr)
 	return 0;
 }
 
+static int qm_get_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
+			   struct acc_vf_data *vf_data)
+{
+	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
+	struct device *dev = &qm->pdev->dev;
+	u32 eqc_addr, aeqc_addr;
+	int ret;
+
+	if (qm->ver == QM_HW_V3) {
+		eqc_addr = QM_EQC_DW0;
+		aeqc_addr = QM_AEQC_DW0;
+	} else {
+		eqc_addr = QM_EQC_PF_DW0;
+		aeqc_addr = QM_AEQC_PF_DW0;
+	}
+
+	/* QM_EQC_DW has 7 regs */
+	ret = qm_read_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
+	if (ret) {
+		dev_err(dev, "failed to read QM_EQC_DW\n");
+		return ret;
+	}
+
+	/* QM_AEQC_DW has 7 regs */
+	ret = qm_read_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
+	if (ret) {
+		dev_err(dev, "failed to read QM_AEQC_DW\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int qm_set_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
+			   struct acc_vf_data *vf_data)
+{
+	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
+	struct device *dev = &qm->pdev->dev;
+	u32 eqc_addr, aeqc_addr;
+	int ret;
+
+	if (qm->ver == QM_HW_V3) {
+		eqc_addr = QM_EQC_DW0;
+		aeqc_addr = QM_AEQC_DW0;
+	} else {
+		eqc_addr = QM_EQC_PF_DW0;
+		aeqc_addr = QM_AEQC_PF_DW0;
+	}
+
+	/* QM_EQC_DW has 7 regs */
+	ret = qm_write_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
+	if (ret) {
+		dev_err(dev, "failed to write QM_EQC_DW\n");
+		return ret;
+	}
+
+	/* QM_AEQC_DW has 7 regs */
+	ret = qm_write_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
+	if (ret) {
+		dev_err(dev, "failed to write QM_AEQC_DW\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
 {
 	struct device *dev = &qm->pdev->dev;
@@ -167,20 +233,6 @@ static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
 		return ret;
 	}
 
-	/* QM_EQC_DW has 7 regs */
-	ret = qm_read_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
-	if (ret) {
-		dev_err(dev, "failed to read QM_EQC_DW\n");
-		return ret;
-	}
-
-	/* QM_AEQC_DW has 7 regs */
-	ret = qm_read_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
-	if (ret) {
-		dev_err(dev, "failed to read QM_AEQC_DW\n");
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -239,20 +291,6 @@ static int qm_set_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
 		return ret;
 	}
 
-	/* QM_EQC_DW has 7 regs */
-	ret = qm_write_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
-	if (ret) {
-		dev_err(dev, "failed to write QM_EQC_DW\n");
-		return ret;
-	}
-
-	/* QM_AEQC_DW has 7 regs */
-	ret = qm_write_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
-	if (ret) {
-		dev_err(dev, "failed to write QM_AEQC_DW\n");
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -522,6 +560,10 @@ static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 		return ret;
 	}
 
+	ret = qm_set_xqc_regs(hisi_acc_vdev, vf_data);
+	if (ret)
+		return ret;
+
 	ret = hisi_qm_mb(qm, QM_MB_CMD_SQC_BT, qm->sqc_dma, 0, 0);
 	if (ret) {
 		dev_err(dev, "set sqc failed\n");
@@ -589,6 +631,10 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	vf_data->vf_qm_state = QM_READY;
 	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
 
+	ret = qm_get_xqc_regs(hisi_acc_vdev, vf_data);
+	if (ret)
+		return ret;
+
 	ret = vf_qm_read_data(vf_qm, vf_data);
 	if (ret)
 		return ret;
@@ -1186,34 +1232,45 @@ static int hisi_acc_vf_qm_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
 {
 	struct vfio_pci_core_device *vdev = &hisi_acc_vdev->core_device;
 	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
+	struct hisi_qm *pf_qm = hisi_acc_vdev->pf_qm;
 	struct pci_dev *vf_dev = vdev->pdev;
 
-	/*
-	 * ACC VF dev BAR2 region consists of both functional register space
-	 * and migration control register space. For migration to work, we
-	 * need access to both. Hence, we map the entire BAR2 region here.
-	 * But unnecessarily exposing the migration BAR region to the Guest
-	 * has the potential to prevent/corrupt the Guest migration. Hence,
-	 * we restrict access to the migration control space from
-	 * Guest(Please see mmap/ioctl/read/write override functions).
-	 *
-	 * Please note that it is OK to expose the entire VF BAR if migration
-	 * is not supported or required as this cannot affect the ACC PF
-	 * configurations.
-	 *
-	 * Also the HiSilicon ACC VF devices supported by this driver on
-	 * HiSilicon hardware platforms are integrated end point devices
-	 * and the platform lacks the capability to perform any PCIe P2P
-	 * between these devices.
-	 */
-
-	vf_qm->io_base =
-		ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
-			pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
-	if (!vf_qm->io_base)
-		return -EIO;
+	if (pf_qm->ver == QM_HW_V3) {
+		/*
+		 * ACC VF dev BAR2 region consists of both functional register space
+		 * and migration control register space. For migration to work, we
+		 * need access to both. Hence, we map the entire BAR2 region here.
+		 * But unnecessarily exposing the migration BAR region to the Guest
+		 * has the potential to prevent/corrupt the Guest migration. Hence,
+		 * we restrict access to the migration control space from
+		 * Guest(Please see mmap/ioctl/read/write override functions).
+		 *
+		 * Please note that it is OK to expose the entire VF BAR if migration
+		 * is not supported or required as this cannot affect the ACC PF
+		 * configurations.
+		 *
+		 * Also the HiSilicon ACC VF devices supported by this driver on
+		 * HiSilicon hardware platforms are integrated end point devices
+		 * and the platform lacks the capability to perform any PCIe P2P
+		 * between these devices.
+		 */
 
+		vf_qm->io_base =
+			ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
+				pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
+		if (!vf_qm->io_base)
+			return -EIO;
+	} else {
+		/*
+		 * On hardware platforms greater than QM_HW_V3, the migration function
+		 * register is placed in the BAR2 configuration region of the PF,
+		 * and each VF device occupies 8KB of configuration space.
+		 */
+		vf_qm->io_base = pf_qm->io_base + QM_MIG_REGION_OFFSET +
+				 hisi_acc_vdev->vf_id * QM_MIG_REGION_SIZE;
+	}
 	vf_qm->fun_type = QM_HW_VF;
+	vf_qm->ver = pf_qm->ver;
 	vf_qm->pdev = vf_dev;
 	mutex_init(&vf_qm->mailbox_lock);
 
@@ -1539,7 +1596,8 @@ static void hisi_acc_vfio_pci_close_device(struct vfio_device *core_vdev)
 	hisi_acc_vf_disable_fds(hisi_acc_vdev);
 	mutex_lock(&hisi_acc_vdev->open_mutex);
 	hisi_acc_vdev->dev_opened = false;
-	iounmap(vf_qm->io_base);
+	if (vf_qm->ver == QM_HW_V3)
+		iounmap(vf_qm->io_base);
 	mutex_unlock(&hisi_acc_vdev->open_mutex);
 	vfio_pci_core_close_device(core_vdev);
 }
diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
index 91002ceeebc1..348f8bb5b42c 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
@@ -59,6 +59,13 @@
 #define ACC_DEV_MAGIC_V1	0XCDCDCDCDFEEDAACC
 #define ACC_DEV_MAGIC_V2	0xAACCFEEDDECADEDE
 
+#define QM_MIG_REGION_OFFSET		0x180000
+#define QM_MIG_REGION_SIZE		0x2000
+
+#define QM_SUB_VERSION_ID		0x100210
+#define QM_EQC_PF_DW0			0x1c00
+#define QM_AEQC_PF_DW0			0x1c20
+
 struct acc_vf_data {
 #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
 	/* QM match information */
-- 
2.24.0

Re: [PATCH v7 2/3] migration: qm updates BAR configuration

[liulongfang]

On 2025/8/5 14:51, Longfang Liu wrote:
> On new platforms greater than QM_HW_V3, the configuration region for the
> live migration function of the accelerator device is no longer
> placed in the VF, but is instead placed in the PF.
> 
> Therefore, the configuration region of the live migration function
> needs to be opened when the QM driver is loaded. When the QM driver
> is uninstalled, the driver needs to clear this configuration.
> 
> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> 
> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
> ---
>  drivers/crypto/hisilicon/qm.c | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
> index 7c41f9593d03..b5ce9b1e9c56 100644
> --- a/drivers/crypto/hisilicon/qm.c
> +++ b/drivers/crypto/hisilicon/qm.c
> @@ -242,6 +242,9 @@
>  #define QM_QOS_MAX_CIR_U		6
>  #define QM_AUTOSUSPEND_DELAY		3000
>  
> +#define QM_MIG_REGION_SEL		0x100198
> +#define QM_MIG_REGION_EN		0x1
> +
>   /* abnormal status value for stopping queue */
>  #define QM_STOP_QUEUE_FAIL		1
>  #define	QM_DUMP_SQC_FAIL		3
> @@ -3004,11 +3007,36 @@ static void qm_put_pci_res(struct hisi_qm *qm)
>  	pci_release_mem_regions(pdev);
>  }
>  
> +static void hisi_mig_region_clear(struct hisi_qm *qm)
> +{
> +	u32 val;
> +
> +	/* Clear migration region set of PF */
> +	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
> +		val = readl(qm->io_base + QM_MIG_REGION_SEL);
> +		val &= ~BIT(0);
> +		writel(val, qm->io_base + QM_MIG_REGION_SEL);
> +	}
> +}
> +
> +static void hisi_mig_region_enable(struct hisi_qm *qm)
> +{
> +	u32 val;
> +
> +	/* Select migration region of PF */
> +	if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) {
> +		val = readl(qm->io_base + QM_MIG_REGION_SEL);
> +		val |= QM_MIG_REGION_EN;
> +		writel(val, qm->io_base + QM_MIG_REGION_SEL);
> +	}
> +}
> +
>  static void hisi_qm_pci_uninit(struct hisi_qm *qm)
>  {
>  	struct pci_dev *pdev = qm->pdev;
>  
>  	pci_free_irq_vectors(pdev);
> +	hisi_mig_region_clear(qm);
>  	qm_put_pci_res(qm);
>  	pci_disable_device(pdev);
>  }
> @@ -5630,6 +5658,7 @@ int hisi_qm_init(struct hisi_qm *qm)
>  		goto err_free_qm_memory;
>  
>  	qm_cmd_init(qm);
> +	hisi_mig_region_enable(qm);
>  
>  	return 0;
>  
> 

Hello, Herbert. There is a patch in this patchset that modifies the crypto subsystem.
Could this patch be merged into the crypto next branch?

Thanks.
Longfang.

Re: [PATCH v7 0/3] update live migration configuration region

[liulongfang]

On 2025/8/5 14:51, Longfang Liu wrote:
> On the new hardware platform, the configuration register space
> of the live migration function is set on the PF, while on the
> old platform, this part is placed on the VF.
> 
> Change v6 -> v7
> 	Update the comment of the live migration configuration scheme.
> 
> Change v5 -> v6
> 	Update VF device properties
> 
> Change v4 -> v5
> 	Remove BAR length alignment
> 
> Change v3 -> v4
> 	Rebase on kernel 6.15
> 
> Change v2 -> v3
> 	Put the changes of Pre_Copy into another bugfix patchset.
> 
> Change v1 -> v2
> 	Delete the vf_qm_state read operation in Pre_Copy
> 
> Longfang Liu (3):
>   migration: update BAR space size
>   migration: qm updates BAR configuration
>   migration: adapt to new migration configuration
> 
>  drivers/crypto/hisilicon/qm.c                 |  29 +++
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 200 ++++++++++++------
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |   7 +
>  3 files changed, 174 insertions(+), 62 deletions(-)
> 

Hello, Alex.
Could this patchset be merged into the next branch?

Thanks.
Longfang.

Re: [PATCH v7 2/3] migration: qm updates BAR configuration

[Herbert Xu]

On Tue, Aug 19, 2025 at 05:12:52PM +0800, liulongfang wrote:
>
> Hello, Herbert. There is a patch in this patchset that modifies the crypto subsystem.
> Could this patch be merged into the crypto next branch?

Does it depend on the other patches?

Cheers,
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH v7 2/3] migration: qm updates BAR configuration

[liulongfang]

On 2025/8/19 17:53, Herbert Xu wrote:
> On Tue, Aug 19, 2025 at 05:12:52PM +0800, liulongfang wrote:
>>
>> Hello, Herbert. There is a patch in this patchset that modifies the crypto subsystem.
>> Could this patch be merged into the crypto next branch?
> 
> Does it depend on the other patches?
>

This patch does not depend on any other patches.

Thanks.
Longfang.

> Cheers,
> 

Re: [PATCH v7 3/3] migration: adapt to new migration configuration

[Alex Williamson]

Patch title should be consistent with previous patches to this driver,
"migration:" is not very meaningful.  "hisi_acc_vfio_pci:" is the most
commonly used prefix.

More below...

On Tue, 5 Aug 2025 14:51:06 +0800
Longfang Liu <liulongfang@huawei.com> wrote:

> On new platforms greater than QM_HW_V3, the migration region has been
> relocated from the VF to the PF. The driver must also be modified
> accordingly to adapt to the new hardware device.
> 
> On the older hardware platform QM_HW_V3, the live migration configuration
> region is placed in the latter 32K portion of the VF's BAR2 configuration
> space. On the new hardware platform QM_HW_V4, the live migration
> configuration region also exists in the same 32K area immediately following
> the VF's BAR2, just like on QM_HW_V3.
> 
> However, access to this region is now controlled by hardware. Additionally,
> a copy of the live migration configuration region is present in the PF's BAR2
> configuration space. On the new hardware platform QM_HW_V4, when an older
> version of the driver is loaded, it behaves like QM_HW_V3 and uses the
> configuration region in the VF, ensuring that the live migration function
> continues to work normally. When the new version of the driver is loaded,
> it directly uses the configuration region in the PF. Meanwhile, hardware
> configuration disables the live migration configuration region in the VF's
> BAR2: reads return all 0xF values, and writes are silently ignored.

Patch 1/ suggests that the migration config registers are fully moved
from VF to PF, opening the full BAR2 to user access.  Here I think it's
described differently, that V4 hardware operates in V3 compatibility
mode with the migration configuration registers only becoming disabled
when the driver switches to V4 mode.  Aren't the patches backwards then,
that we should only expose the full BAR2 once the driver has disabled
the migration registers?

Actually I think it's patch 2/ that was claimed is independent of
these vfio-pci variant driver changes that appears to direct the PF to
disable compatibility mode, right?  But if we implement the vfio driver
change without the PF driver change, then I think we're broken and
we're creating a tenuous dependency between the PF driver and the
vfio-pci variant VF driver.  It seems like maybe we need to rely on
both V4 hardware AND testing that the PF driver has set the write
config before we can implement V4 mode here.  Thanks,

Alex

> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> ---
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 164 ++++++++++++------
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |   7 +
>  2 files changed, 118 insertions(+), 53 deletions(-)
> 
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> index ddb3fd4df5aa..a20785bcea62 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> @@ -125,6 +125,72 @@ static int qm_get_cqc(struct hisi_qm *qm, u64 *addr)
>  	return 0;
>  }
>  
> +static int qm_get_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
> +			   struct acc_vf_data *vf_data)
> +{
> +	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
> +	struct device *dev = &qm->pdev->dev;
> +	u32 eqc_addr, aeqc_addr;
> +	int ret;
> +
> +	if (qm->ver == QM_HW_V3) {
> +		eqc_addr = QM_EQC_DW0;
> +		aeqc_addr = QM_AEQC_DW0;
> +	} else {
> +		eqc_addr = QM_EQC_PF_DW0;
> +		aeqc_addr = QM_AEQC_PF_DW0;
> +	}
> +
> +	/* QM_EQC_DW has 7 regs */
> +	ret = qm_read_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
> +	if (ret) {
> +		dev_err(dev, "failed to read QM_EQC_DW\n");
> +		return ret;
> +	}
> +
> +	/* QM_AEQC_DW has 7 regs */
> +	ret = qm_read_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
> +	if (ret) {
> +		dev_err(dev, "failed to read QM_AEQC_DW\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int qm_set_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
> +			   struct acc_vf_data *vf_data)
> +{
> +	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
> +	struct device *dev = &qm->pdev->dev;
> +	u32 eqc_addr, aeqc_addr;
> +	int ret;
> +
> +	if (qm->ver == QM_HW_V3) {
> +		eqc_addr = QM_EQC_DW0;
> +		aeqc_addr = QM_AEQC_DW0;
> +	} else {
> +		eqc_addr = QM_EQC_PF_DW0;
> +		aeqc_addr = QM_AEQC_PF_DW0;
> +	}
> +
> +	/* QM_EQC_DW has 7 regs */
> +	ret = qm_write_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
> +	if (ret) {
> +		dev_err(dev, "failed to write QM_EQC_DW\n");
> +		return ret;
> +	}
> +
> +	/* QM_AEQC_DW has 7 regs */
> +	ret = qm_write_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
> +	if (ret) {
> +		dev_err(dev, "failed to write QM_AEQC_DW\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>  {
>  	struct device *dev = &qm->pdev->dev;
> @@ -167,20 +233,6 @@ static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>  		return ret;
>  	}
>  
> -	/* QM_EQC_DW has 7 regs */
> -	ret = qm_read_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
> -	if (ret) {
> -		dev_err(dev, "failed to read QM_EQC_DW\n");
> -		return ret;
> -	}
> -
> -	/* QM_AEQC_DW has 7 regs */
> -	ret = qm_read_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
> -	if (ret) {
> -		dev_err(dev, "failed to read QM_AEQC_DW\n");
> -		return ret;
> -	}
> -
>  	return 0;
>  }
>  
> @@ -239,20 +291,6 @@ static int qm_set_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>  		return ret;
>  	}
>  
> -	/* QM_EQC_DW has 7 regs */
> -	ret = qm_write_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
> -	if (ret) {
> -		dev_err(dev, "failed to write QM_EQC_DW\n");
> -		return ret;
> -	}
> -
> -	/* QM_AEQC_DW has 7 regs */
> -	ret = qm_write_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
> -	if (ret) {
> -		dev_err(dev, "failed to write QM_AEQC_DW\n");
> -		return ret;
> -	}
> -
>  	return 0;
>  }
>  
> @@ -522,6 +560,10 @@ static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>  		return ret;
>  	}
>  
> +	ret = qm_set_xqc_regs(hisi_acc_vdev, vf_data);
> +	if (ret)
> +		return ret;
> +
>  	ret = hisi_qm_mb(qm, QM_MB_CMD_SQC_BT, qm->sqc_dma, 0, 0);
>  	if (ret) {
>  		dev_err(dev, "set sqc failed\n");
> @@ -589,6 +631,10 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>  	vf_data->vf_qm_state = QM_READY;
>  	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
>  
> +	ret = qm_get_xqc_regs(hisi_acc_vdev, vf_data);
> +	if (ret)
> +		return ret;
> +
>  	ret = vf_qm_read_data(vf_qm, vf_data);
>  	if (ret)
>  		return ret;
> @@ -1186,34 +1232,45 @@ static int hisi_acc_vf_qm_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>  {
>  	struct vfio_pci_core_device *vdev = &hisi_acc_vdev->core_device;
>  	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> +	struct hisi_qm *pf_qm = hisi_acc_vdev->pf_qm;
>  	struct pci_dev *vf_dev = vdev->pdev;
>  
> -	/*
> -	 * ACC VF dev BAR2 region consists of both functional register space
> -	 * and migration control register space. For migration to work, we
> -	 * need access to both. Hence, we map the entire BAR2 region here.
> -	 * But unnecessarily exposing the migration BAR region to the Guest
> -	 * has the potential to prevent/corrupt the Guest migration. Hence,
> -	 * we restrict access to the migration control space from
> -	 * Guest(Please see mmap/ioctl/read/write override functions).
> -	 *
> -	 * Please note that it is OK to expose the entire VF BAR if migration
> -	 * is not supported or required as this cannot affect the ACC PF
> -	 * configurations.
> -	 *
> -	 * Also the HiSilicon ACC VF devices supported by this driver on
> -	 * HiSilicon hardware platforms are integrated end point devices
> -	 * and the platform lacks the capability to perform any PCIe P2P
> -	 * between these devices.
> -	 */
> -
> -	vf_qm->io_base =
> -		ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
> -			pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
> -	if (!vf_qm->io_base)
> -		return -EIO;
> +	if (pf_qm->ver == QM_HW_V3) {
> +		/*
> +		 * ACC VF dev BAR2 region consists of both functional register space
> +		 * and migration control register space. For migration to work, we
> +		 * need access to both. Hence, we map the entire BAR2 region here.
> +		 * But unnecessarily exposing the migration BAR region to the Guest
> +		 * has the potential to prevent/corrupt the Guest migration. Hence,
> +		 * we restrict access to the migration control space from
> +		 * Guest(Please see mmap/ioctl/read/write override functions).
> +		 *
> +		 * Please note that it is OK to expose the entire VF BAR if migration
> +		 * is not supported or required as this cannot affect the ACC PF
> +		 * configurations.
> +		 *
> +		 * Also the HiSilicon ACC VF devices supported by this driver on
> +		 * HiSilicon hardware platforms are integrated end point devices
> +		 * and the platform lacks the capability to perform any PCIe P2P
> +		 * between these devices.
> +		 */
>  
> +		vf_qm->io_base =
> +			ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
> +				pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
> +		if (!vf_qm->io_base)
> +			return -EIO;
> +	} else {
> +		/*
> +		 * On hardware platforms greater than QM_HW_V3, the migration function
> +		 * register is placed in the BAR2 configuration region of the PF,
> +		 * and each VF device occupies 8KB of configuration space.
> +		 */
> +		vf_qm->io_base = pf_qm->io_base + QM_MIG_REGION_OFFSET +
> +				 hisi_acc_vdev->vf_id * QM_MIG_REGION_SIZE;
> +	}
>  	vf_qm->fun_type = QM_HW_VF;
> +	vf_qm->ver = pf_qm->ver;
>  	vf_qm->pdev = vf_dev;
>  	mutex_init(&vf_qm->mailbox_lock);
>  
> @@ -1539,7 +1596,8 @@ static void hisi_acc_vfio_pci_close_device(struct vfio_device *core_vdev)
>  	hisi_acc_vf_disable_fds(hisi_acc_vdev);
>  	mutex_lock(&hisi_acc_vdev->open_mutex);
>  	hisi_acc_vdev->dev_opened = false;
> -	iounmap(vf_qm->io_base);
> +	if (vf_qm->ver == QM_HW_V3)
> +		iounmap(vf_qm->io_base);
>  	mutex_unlock(&hisi_acc_vdev->open_mutex);
>  	vfio_pci_core_close_device(core_vdev);
>  }
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> index 91002ceeebc1..348f8bb5b42c 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> @@ -59,6 +59,13 @@
>  #define ACC_DEV_MAGIC_V1	0XCDCDCDCDFEEDAACC
>  #define ACC_DEV_MAGIC_V2	0xAACCFEEDDECADEDE
>  
> +#define QM_MIG_REGION_OFFSET		0x180000
> +#define QM_MIG_REGION_SIZE		0x2000
> +
> +#define QM_SUB_VERSION_ID		0x100210
> +#define QM_EQC_PF_DW0			0x1c00
> +#define QM_AEQC_PF_DW0			0x1c20
> +
>  struct acc_vf_data {
>  #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
>  	/* QM match information */

Re: [PATCH v7 3/3] migration: adapt to new migration configuration

[liulongfang]

On 2025/8/20 5:35, Alex Williamson wrote:
> 
> Patch title should be consistent with previous patches to this driver,
> "migration:" is not very meaningful.  "hisi_acc_vfio_pci:" is the most
> commonly used prefix.
> 
> More below...
>

OK, I'll revise the title description for this patch set.

> On Tue, 5 Aug 2025 14:51:06 +0800
> Longfang Liu <liulongfang@huawei.com> wrote:
> 
>> On new platforms greater than QM_HW_V3, the migration region has been
>> relocated from the VF to the PF. The driver must also be modified
>> accordingly to adapt to the new hardware device.
>>
>> On the older hardware platform QM_HW_V3, the live migration configuration
>> region is placed in the latter 32K portion of the VF's BAR2 configuration
>> space. On the new hardware platform QM_HW_V4, the live migration
>> configuration region also exists in the same 32K area immediately following
>> the VF's BAR2, just like on QM_HW_V3.
>>
>> However, access to this region is now controlled by hardware. Additionally,
>> a copy of the live migration configuration region is present in the PF's BAR2
>> configuration space. On the new hardware platform QM_HW_V4, when an older
>> version of the driver is loaded, it behaves like QM_HW_V3 and uses the
>> configuration region in the VF, ensuring that the live migration function
>> continues to work normally. When the new version of the driver is loaded,
>> it directly uses the configuration region in the PF. Meanwhile, hardware
>> configuration disables the live migration configuration region in the VF's
>> BAR2: reads return all 0xF values, and writes are silently ignored.
> 
> Patch 1/ suggests that the migration config registers are fully moved
> from VF to PF, opening the full BAR2 to user access.  Here I think it's
> described differently, that V4 hardware operates in V3 compatibility
> mode with the migration configuration registers only becoming disabled
> when the driver switches to V4 mode.  Aren't the patches backwards then,
> that we should only expose the full BAR2 once the driver has disabled
> the migration registers?
>> Actually I think it's patch 2/ that was claimed is independent of
> these vfio-pci variant driver changes that appears to direct the PF to
> disable compatibility mode, right?  But if we implement the vfio driver
> change without the PF driver change, then I think we're broken and
> we're creating a tenuous dependency between the PF driver and the
> vfio-pci variant VF driver.  It seems like maybe we need to rely on
> both V4 hardware AND testing that the PF driver has set the write
> config before we can implement V4 mode here.  Thanks,
>

Your concern is valid. We cannot have the hisi_acc_vfio_pci driver depend on
the hisi_qm driver. Instead, the hisi_acc_vfio_pci driver should adapt to the
current device configuration on its own.
That is, if the device has loaded the hisi_qm driver and switched to V4 mode,
then the hisi_acc_vfio_pci driver should open the full BAR2 for user access.
Otherwise, it should continue to operate in V3 compatibility mode.

Thanks
Longfang.

> Alex
> 
>> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
>> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
>> ---
>>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 164 ++++++++++++------
>>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |   7 +
>>  2 files changed, 118 insertions(+), 53 deletions(-)
>>
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> index ddb3fd4df5aa..a20785bcea62 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> @@ -125,6 +125,72 @@ static int qm_get_cqc(struct hisi_qm *qm, u64 *addr)
>>  	return 0;
>>  }
>>  
>> +static int qm_get_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>> +			   struct acc_vf_data *vf_data)
>> +{
>> +	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
>> +	struct device *dev = &qm->pdev->dev;
>> +	u32 eqc_addr, aeqc_addr;
>> +	int ret;
>> +
>> +	if (qm->ver == QM_HW_V3) {
>> +		eqc_addr = QM_EQC_DW0;
>> +		aeqc_addr = QM_AEQC_DW0;
>> +	} else {
>> +		eqc_addr = QM_EQC_PF_DW0;
>> +		aeqc_addr = QM_AEQC_PF_DW0;
>> +	}
>> +
>> +	/* QM_EQC_DW has 7 regs */
>> +	ret = qm_read_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
>> +	if (ret) {
>> +		dev_err(dev, "failed to read QM_EQC_DW\n");
>> +		return ret;
>> +	}
>> +
>> +	/* QM_AEQC_DW has 7 regs */
>> +	ret = qm_read_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
>> +	if (ret) {
>> +		dev_err(dev, "failed to read QM_AEQC_DW\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int qm_set_xqc_regs(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>> +			   struct acc_vf_data *vf_data)
>> +{
>> +	struct hisi_qm *qm = &hisi_acc_vdev->vf_qm;
>> +	struct device *dev = &qm->pdev->dev;
>> +	u32 eqc_addr, aeqc_addr;
>> +	int ret;
>> +
>> +	if (qm->ver == QM_HW_V3) {
>> +		eqc_addr = QM_EQC_DW0;
>> +		aeqc_addr = QM_AEQC_DW0;
>> +	} else {
>> +		eqc_addr = QM_EQC_PF_DW0;
>> +		aeqc_addr = QM_AEQC_PF_DW0;
>> +	}
>> +
>> +	/* QM_EQC_DW has 7 regs */
>> +	ret = qm_write_regs(qm, eqc_addr, vf_data->qm_eqc_dw, 7);
>> +	if (ret) {
>> +		dev_err(dev, "failed to write QM_EQC_DW\n");
>> +		return ret;
>> +	}
>> +
>> +	/* QM_AEQC_DW has 7 regs */
>> +	ret = qm_write_regs(qm, aeqc_addr, vf_data->qm_aeqc_dw, 7);
>> +	if (ret) {
>> +		dev_err(dev, "failed to write QM_AEQC_DW\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>>  static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>>  {
>>  	struct device *dev = &qm->pdev->dev;
>> @@ -167,20 +233,6 @@ static int qm_get_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>>  		return ret;
>>  	}
>>  
>> -	/* QM_EQC_DW has 7 regs */
>> -	ret = qm_read_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
>> -	if (ret) {
>> -		dev_err(dev, "failed to read QM_EQC_DW\n");
>> -		return ret;
>> -	}
>> -
>> -	/* QM_AEQC_DW has 7 regs */
>> -	ret = qm_read_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
>> -	if (ret) {
>> -		dev_err(dev, "failed to read QM_AEQC_DW\n");
>> -		return ret;
>> -	}
>> -
>>  	return 0;
>>  }
>>  
>> @@ -239,20 +291,6 @@ static int qm_set_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
>>  		return ret;
>>  	}
>>  
>> -	/* QM_EQC_DW has 7 regs */
>> -	ret = qm_write_regs(qm, QM_EQC_DW0, vf_data->qm_eqc_dw, 7);
>> -	if (ret) {
>> -		dev_err(dev, "failed to write QM_EQC_DW\n");
>> -		return ret;
>> -	}
>> -
>> -	/* QM_AEQC_DW has 7 regs */
>> -	ret = qm_write_regs(qm, QM_AEQC_DW0, vf_data->qm_aeqc_dw, 7);
>> -	if (ret) {
>> -		dev_err(dev, "failed to write QM_AEQC_DW\n");
>> -		return ret;
>> -	}
>> -
>>  	return 0;
>>  }
>>  
>> @@ -522,6 +560,10 @@ static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>>  		return ret;
>>  	}
>>  
>> +	ret = qm_set_xqc_regs(hisi_acc_vdev, vf_data);
>> +	if (ret)
>> +		return ret;
>> +
>>  	ret = hisi_qm_mb(qm, QM_MB_CMD_SQC_BT, qm->sqc_dma, 0, 0);
>>  	if (ret) {
>>  		dev_err(dev, "set sqc failed\n");
>> @@ -589,6 +631,10 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
>>  	vf_data->vf_qm_state = QM_READY;
>>  	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
>>  
>> +	ret = qm_get_xqc_regs(hisi_acc_vdev, vf_data);
>> +	if (ret)
>> +		return ret;
>> +
>>  	ret = vf_qm_read_data(vf_qm, vf_data);
>>  	if (ret)
>>  		return ret;
>> @@ -1186,34 +1232,45 @@ static int hisi_acc_vf_qm_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>>  {
>>  	struct vfio_pci_core_device *vdev = &hisi_acc_vdev->core_device;
>>  	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
>> +	struct hisi_qm *pf_qm = hisi_acc_vdev->pf_qm;
>>  	struct pci_dev *vf_dev = vdev->pdev;
>>  
>> -	/*
>> -	 * ACC VF dev BAR2 region consists of both functional register space
>> -	 * and migration control register space. For migration to work, we
>> -	 * need access to both. Hence, we map the entire BAR2 region here.
>> -	 * But unnecessarily exposing the migration BAR region to the Guest
>> -	 * has the potential to prevent/corrupt the Guest migration. Hence,
>> -	 * we restrict access to the migration control space from
>> -	 * Guest(Please see mmap/ioctl/read/write override functions).
>> -	 *
>> -	 * Please note that it is OK to expose the entire VF BAR if migration
>> -	 * is not supported or required as this cannot affect the ACC PF
>> -	 * configurations.
>> -	 *
>> -	 * Also the HiSilicon ACC VF devices supported by this driver on
>> -	 * HiSilicon hardware platforms are integrated end point devices
>> -	 * and the platform lacks the capability to perform any PCIe P2P
>> -	 * between these devices.
>> -	 */
>> -
>> -	vf_qm->io_base =
>> -		ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
>> -			pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
>> -	if (!vf_qm->io_base)
>> -		return -EIO;
>> +	if (pf_qm->ver == QM_HW_V3) {
>> +		/*
>> +		 * ACC VF dev BAR2 region consists of both functional register space
>> +		 * and migration control register space. For migration to work, we
>> +		 * need access to both. Hence, we map the entire BAR2 region here.
>> +		 * But unnecessarily exposing the migration BAR region to the Guest
>> +		 * has the potential to prevent/corrupt the Guest migration. Hence,
>> +		 * we restrict access to the migration control space from
>> +		 * Guest(Please see mmap/ioctl/read/write override functions).
>> +		 *
>> +		 * Please note that it is OK to expose the entire VF BAR if migration
>> +		 * is not supported or required as this cannot affect the ACC PF
>> +		 * configurations.
>> +		 *
>> +		 * Also the HiSilicon ACC VF devices supported by this driver on
>> +		 * HiSilicon hardware platforms are integrated end point devices
>> +		 * and the platform lacks the capability to perform any PCIe P2P
>> +		 * between these devices.
>> +		 */
>>  
>> +		vf_qm->io_base =
>> +			ioremap(pci_resource_start(vf_dev, VFIO_PCI_BAR2_REGION_INDEX),
>> +				pci_resource_len(vf_dev, VFIO_PCI_BAR2_REGION_INDEX));
>> +		if (!vf_qm->io_base)
>> +			return -EIO;
>> +	} else {
>> +		/*
>> +		 * On hardware platforms greater than QM_HW_V3, the migration function
>> +		 * register is placed in the BAR2 configuration region of the PF,
>> +		 * and each VF device occupies 8KB of configuration space.
>> +		 */
>> +		vf_qm->io_base = pf_qm->io_base + QM_MIG_REGION_OFFSET +
>> +				 hisi_acc_vdev->vf_id * QM_MIG_REGION_SIZE;
>> +	}
>>  	vf_qm->fun_type = QM_HW_VF;
>> +	vf_qm->ver = pf_qm->ver;
>>  	vf_qm->pdev = vf_dev;
>>  	mutex_init(&vf_qm->mailbox_lock);
>>  
>> @@ -1539,7 +1596,8 @@ static void hisi_acc_vfio_pci_close_device(struct vfio_device *core_vdev)
>>  	hisi_acc_vf_disable_fds(hisi_acc_vdev);
>>  	mutex_lock(&hisi_acc_vdev->open_mutex);
>>  	hisi_acc_vdev->dev_opened = false;
>> -	iounmap(vf_qm->io_base);
>> +	if (vf_qm->ver == QM_HW_V3)
>> +		iounmap(vf_qm->io_base);
>>  	mutex_unlock(&hisi_acc_vdev->open_mutex);
>>  	vfio_pci_core_close_device(core_vdev);
>>  }
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> index 91002ceeebc1..348f8bb5b42c 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> @@ -59,6 +59,13 @@
>>  #define ACC_DEV_MAGIC_V1	0XCDCDCDCDFEEDAACC
>>  #define ACC_DEV_MAGIC_V2	0xAACCFEEDDECADEDE
>>  
>> +#define QM_MIG_REGION_OFFSET		0x180000
>> +#define QM_MIG_REGION_SIZE		0x2000
>> +
>> +#define QM_SUB_VERSION_ID		0x100210
>> +#define QM_EQC_PF_DW0			0x1c00
>> +#define QM_AEQC_PF_DW0			0x1c20
>> +
>>  struct acc_vf_data {
>>  #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
>>  	/* QM match information */
> 
> 
> .
>