From: Rodolfo Giometti <giometti@enneenne.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-kernel@vger.kernel.org
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Subject: Re: [PATCH v2 1/1] pps: generators: pps_gen_parport: Switch to use module_parport_driver()
Date: Wed, 6 Oct 2021 08:54:50 +0200 [thread overview]
Message-ID: <bd72ecdb-7d7c-726d-85a4-84ea1088eb70@enneenne.com> (raw)
In-Reply-To: <20211001150316.12545-1-andriy.shevchenko@linux.intel.com>
On 01/10/21 17:03, Andy Shevchenko wrote:
> Switch to use module_parport_driver() to reduce boilerplate code.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
> ---
> v2: remove useless message (Greg), Cc to the original (hopefully) author
> drivers/pps/generators/pps_gen_parport.c | 42 ++++--------------------
> 1 file changed, 7 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pps/generators/pps_gen_parport.c b/drivers/pps/generators/pps_gen_parport.c
> index 6a1af7664f3b..fba6c490977c 100644
> --- a/drivers/pps/generators/pps_gen_parport.c
> +++ b/drivers/pps/generators/pps_gen_parport.c
> @@ -20,8 +20,6 @@
> #include <linux/hrtimer.h>
> #include <linux/parport.h>
>
> -#define DRVDESC "parallel port PPS signal generator"
> -
> #define SIGNAL 0
> #define NO_SIGNAL PARPORT_CONTROL_STROBE
>
> @@ -180,6 +178,11 @@ static void parport_attach(struct parport *port)
> {
> struct pardev_cb pps_cb;
>
> + if (send_delay > SEND_DELAY_MAX) {
> + pr_err("delay value should be not greater then %d\n", SEND_DELAY_MAX);
> + return -EINVAL;
> + }
> +
> if (attached) {
> /* we already have a port */
> return;
> @@ -231,39 +234,8 @@ static struct parport_driver pps_gen_parport_driver = {
> .detach = parport_detach,
> .devmodel = true,
> };
> -
> -/* module staff */
> -
> -static int __init pps_gen_parport_init(void)
> -{
> - int ret;
> -
> - pr_info(DRVDESC "\n");
> -
> - if (send_delay > SEND_DELAY_MAX) {
> - pr_err("delay value should be not greater"
> - " then %d\n", SEND_DELAY_MAX);
> - return -EINVAL;
> - }
> -
> - ret = parport_register_driver(&pps_gen_parport_driver);
> - if (ret) {
> - pr_err("unable to register with parport\n");
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> -static void __exit pps_gen_parport_exit(void)
> -{
> - parport_unregister_driver(&pps_gen_parport_driver);
> - pr_info("hrtimer avg error is %ldns\n", hrtimer_error);
> -}
> -
> -module_init(pps_gen_parport_init);
> -module_exit(pps_gen_parport_exit);
> +module_parport_driver(pps_gen_parport_driver);
>
> MODULE_AUTHOR("Alexander Gordeev <lasaine@lvk.cs.msu.su>");
> -MODULE_DESCRIPTION(DRVDESC);
> +MODULE_DESCRIPTION("parallel port PPS signal generator");
> MODULE_LICENSE("GPL");
>
--
GNU/Linux Solutions e-mail: giometti@enneenne.com
Linux Device Driver giometti@linux.it
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
next prev parent reply other threads:[~2021-10-06 6:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-01 15:03 [PATCH v2 1/1] pps: generators: pps_gen_parport: Switch to use module_parport_driver() Andy Shevchenko
2021-10-04 6:44 ` Rodolfo Giometti
2021-10-04 7:32 ` Andy Shevchenko
2021-10-06 6:54 ` Rodolfo Giometti [this message]
2022-02-03 15:09 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd72ecdb-7d7c-726d-85a4-84ea1088eb70@enneenne.com \
--to=giometti@enneenne.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=lasaine@lvk.cs.msu.su \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox