* [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
2024-07-02 15:43 [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Frieder Schrempf
@ 2024-07-02 15:43 ` Frieder Schrempf
2024-07-02 15:49 ` Conor Dooley
2024-07-04 6:42 ` Krzysztof Kozlowski
2024-07-02 15:43 ` [PATCH 2/3] arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board Frieder Schrempf
` (2 subsequent siblings)
3 siblings, 2 replies; 7+ messages in thread
From: Frieder Schrempf @ 2024-07-02 15:43 UTC (permalink / raw)
To: Conor Dooley, devicetree, Krzysztof Kozlowski, linux-kernel,
Li Yang, Rob Herring, Shawn Guo
Cc: Frieder Schrempf, Alexander Stein, Bjorn Helgaas, Conor Dooley,
Gregor Herburger, Hiago De Franco, Hugo Villeneuve,
Joao Paulo Goncalves, Krzysztof Kozlowski, Marco Felsch,
Markus Niebel, Tim Harvey
From: Frieder Schrempf <frieder.schrempf@kontron.de>
Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier
boards.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 6d185d09cb6ae..0bda153c38705 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1095,6 +1095,19 @@ properties:
- const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM
- const: fsl,imx8mp
+ - description: Kontron i.MX8MP OSM-S SoM based Boards
+ items:
+ - const: kontron,imx8mp-bl-osm-s # Kontron BL i.MX8MP OSM-S Board
+ - const: kontron,imx8mp-osm-s # Kontron i.MX8MP OSM-S SoM
+ - const: fsl,imx8mp
+
+ - description: Kontron i.MX8MP SMARC based Boards
+ items:
+ - const: kontron,imx8mp-smarc-eval-carrier # Kontron i.MX8MP SMARC Eval Carrier
+ - const: kontron,imx8mp-smarc # Kontron i.MX8MP SMARC Module
+ - const: kontron,imx8mp-osm-s # Kontron i.MX8MP OSM-S SoM
+ - const: fsl,imx8mp
+
- description: PHYTEC phyCORE-i.MX8MP SoM based boards
items:
- const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK
--
2.45.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
2024-07-02 15:43 ` [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards Frieder Schrempf
@ 2024-07-02 15:49 ` Conor Dooley
2024-07-04 6:42 ` Krzysztof Kozlowski
1 sibling, 0 replies; 7+ messages in thread
From: Conor Dooley @ 2024-07-02 15:49 UTC (permalink / raw)
To: Frieder Schrempf
Cc: Conor Dooley, devicetree, Krzysztof Kozlowski, linux-kernel,
Li Yang, Rob Herring, Shawn Guo, Frieder Schrempf,
Alexander Stein, Bjorn Helgaas, Conor Dooley, Gregor Herburger,
Hiago De Franco, Hugo Villeneuve, Joao Paulo Goncalves,
Krzysztof Kozlowski, Marco Felsch, Markus Niebel, Tim Harvey
[-- Attachment #1: Type: text/plain, Size: 328 bytes --]
On Tue, Jul 02, 2024 at 05:43:19PM +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier
> boards.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
2024-07-02 15:43 ` [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards Frieder Schrempf
2024-07-02 15:49 ` Conor Dooley
@ 2024-07-04 6:42 ` Krzysztof Kozlowski
1 sibling, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2024-07-04 6:42 UTC (permalink / raw)
To: Frieder Schrempf, Conor Dooley, devicetree, Krzysztof Kozlowski,
linux-kernel, Li Yang, Rob Herring, Shawn Guo
Cc: Frieder Schrempf, Alexander Stein, Bjorn Helgaas, Conor Dooley,
Gregor Herburger, Hiago De Franco, Hugo Villeneuve,
Joao Paulo Goncalves, Krzysztof Kozlowski, Marco Felsch,
Markus Niebel, Tim Harvey
On 02/07/2024 17:43, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier
> boards.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board
2024-07-02 15:43 [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Frieder Schrempf
2024-07-02 15:43 ` [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards Frieder Schrempf
@ 2024-07-02 15:43 ` Frieder Schrempf
2024-07-02 15:43 ` [PATCH 3/3] arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier Frieder Schrempf
2024-07-03 14:27 ` [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Rob Herring (Arm)
3 siblings, 0 replies; 7+ messages in thread
From: Frieder Schrempf @ 2024-07-02 15:43 UTC (permalink / raw)
To: Conor Dooley, devicetree, imx, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel, Rob Herring, Sascha Hauer,
Shawn Guo
Cc: Frieder Schrempf, Alexander Stein, Fabio Estevam,
Gregor Herburger, Joao Paulo Goncalves, Pengutronix Kernel Team,
Tim Harvey
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/Makefile | 5 +
.../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++
.../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++
.../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++
4 files changed, 1332 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bd443c2bc5a48..8688a85ba5a44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -170,6 +170,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
+
+imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
new file mode 100644
index 0000000000000..8fda582d12b4b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+ model = "Kontron BL i.MX8MP OSM-S";
+ compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ };
+
+ extcon_usbc: usbc {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_id>;
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm2 0 5000 0>;
+ };
+
+ reg_vcc_panel: regulator-vcc-panel {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VCC_PANEL";
+ };
+};
+
+&ecspi2 {
+ status = "okay";
+
+ eeram@0 {
+ compatible = "microchip,48l640";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_rgmii>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy1>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_rgmii>;
+ phy-connection-type = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * SDIO_A_PWR_EN -> CAN_ADDR2
+ * SDIO_A_WP -> CAN_ADDR3
+ */
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+ "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+ "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "CAN_ADDR2",
+ "CAN_ADDR3";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * SPI_A_WP -> CAN_ADDR0
+ * SPI_A_HOLD -> CAN_ADDR1
+ * GPIO_B_0 -> DIO1_OUT
+ * GPIO_B_1 -> DIO2_OUT
+ */
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+ "SDIO_B_D6", "SDIO_B_D7", "CAN_ADDR0", "CAN_ADDR1",
+ "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+ "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+ "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "DIO1_OUT",
+ "DIO2_OUT", "", "BOOT_SEL0", "BOOT_SEL1",
+ "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+ "HDMI_CEC", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * GPIO_B_5 -> DIO2_IN
+ * GPIO_B_6 -> DIO3_IN
+ * GPIO_B_7 -> DIO4_IN
+ * GPIO_B_3 -> DIO4_OUT
+ * GPIO_B_4 -> DIO1_IN
+ * GPIO_B_2 -> DIO3_OUT
+ */
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "DIO2_IN", "DIO3_IN", "DIO4_IN", "GPIO_C_0",
+ "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+ "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+ "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "DIO4_OUT", "DIO1_IN",
+ "DIO3_OUT", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+ "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+ "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c4>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ gpio_expander_dio: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+ "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+®_usdhc2_vcc {
+ status = "disabled";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ linux,rs485-enabled-at-boot-time;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+
+ dr_mode = "otg";
+ extcon = <&extcon_usbc>;
+ usb-role-switch;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_hub>;
+ dr_mode = "host";
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ fsl,disable-port-power-control;
+ fsl,permanently-attached;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_vdd_3v3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ethphy0: ethphy0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x46
+ >;
+ };
+
+ pinctrl_ethphy1: ethphy1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x46
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x46
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x46
+ >;
+ };
+
+ pinctrl_usb_hub: usbhubgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x46
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
new file mode 100644
index 0000000000000..f2f2f07f9b4f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+ model = "Kontron DL i.MX8MP OSM-S";
+ compatible = "kontron,imx8mp-dl-osm-s", "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s",
+ "fsl,imx8mp";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ };
+
+ panel {
+ compatible = "panel-lvds";
+ width-mm = <154>;
+ height-mm = <86>;
+ data-mapping = "vesa-24";
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_vcc_panel>;
+
+ panel-timing {
+ clock-frequency = <50000000>;
+ hactive = <1024>;
+ hback-porch = <80>;
+ hfront-porch = <40>;
+ hsync-len = <40>;
+ vactive = <600>;
+ vback-porch = <10>;
+ vfront-porch = <3>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+ };
+};
+
+&gpio4 {
+ panel_rst {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-reset";
+ };
+
+ panel_stby {
+ gpio-hog;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-standby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_stby>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <6 8>;
+ irq-gpios = <&gpio1 6 0>;
+ power-supply = <®_vcc_panel>;
+ reset-gpios = <&gpio1 7 0>;
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&ldb_lvds_ch0 {
+ remote-endpoint = <&panel_in_lvds0>;
+};
+
+&lvds_bridge {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_panel_stby: panelstbygrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
new file mode 100644
index 0000000000000..892710e4f9d1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "Kontron OSM-S i.MX8MP";
+ compatible = "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ aliases {
+ rtc0 = &rv3028;
+ rtc1 = &snvs_rtc;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /*
+ * There are multiple SoM flavors with different DDR sizes.
+ * The smallest is 1GB. For larger sizes the bootloader will
+ * update the reg property.
+ */
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+ enable-active-high;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "VBUS_USB_A";
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+ enable-active-high;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "VBUS_USB_B";
+ };
+
+ reg_usdhc2_vcc: regulator-usdhc2-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+ enable-active-high;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_SDIO_A";
+ };
+
+ reg_usdhc3_vcc: regulator-usdhc3-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+ enable-active-high;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_SDIO_B";
+ };
+
+ reg_vdd_carrier: regulator-vdd-carrier {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+ enable-active-high;
+ gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "VDD_CARRIER";
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&ecspi1 { /* OSM-S SPI_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 { /* OSM-S SPI_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+ gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+ "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+ "GPIO_A_5", "USB_B_EN", "USB_A_ID", "USB_B_ID",
+ "USB_A_EN", "USB_A_OC","CAM_MCK", "USB_B_OC",
+ "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+ "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+ "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+ "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+ "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+ "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+ "SDIO_A_WP";
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+ "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+ "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+ "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+ "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_0",
+ "GPIO_B_1", "", "BOOT_SEL0", "BOOT_SEL1",
+ "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+ "HDMI_CEC", "HDMI_HPD";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "GPIO_B_5", "GPIO_B_6", "GPIO_B_7", "GPIO_C_0",
+ "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+ "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+ "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "GPIO_B_3", "GPIO_B_4",
+ "GPIO_B_2", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+ "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+ "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&gpio5 {
+ gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+ "PWM_1", "PWM_0", "SPI_A_SCK", "SPI_A_SDO",
+ "SPI_A_SDI", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+ "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+ "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+ "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+ "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+ "UART_B_RX", "UART_B_TX";
+};
+
+&i2c1 { /* OSM-S I2C_A */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c2 { /* OSM-S I2C_B */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* OSM-S PCIe SMDAT/SMCLK */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c4 { /* OSM-S I2C_CAM */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* PMIC, EEPROM, RTC */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-1 = <&pinctrl_i2c5_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pca9450: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ nxp,i2c-lt-enable;
+
+ regulators {
+ reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+ regulator-name = "+0V8_VDD_SOC (BUCK1)";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_arm: BUCK2 {
+ regulator-name = "+0V9_VDD_ARM (BUCK2)";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-name = "+3V3 (BUCK4)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_1v8: BUCK5 {
+ regulator-name = "+1V8 (BUCK5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_dram: BUCK6 {
+ regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_snvs: LDO1 {
+ regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdda: LDO3 {
+ regulator-name = "+1V8_VDDA (LDO3)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_sd: LDO5 {
+ regulator-name = "NVCC_SD (LDO5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "onnn,n24s64b", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ size = <8192>;
+ num-addresses = <1>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio3 24 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pwm1 { /* OSM-S PWM_0 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 { /* OSM-S PWM_1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 { /* OSM-S PWM_2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&sai3 { /* OSM-S I2S_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+};
+
+&uart1 { /* OSM-S UART_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 { /* OSM-S UART_C */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 { /* OSM-S UART_CON */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* OSM-S UART_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usb3_0 { /* OSM-S USB_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_oc>;
+ fsl,over-current-active-low;
+};
+
+&usb3_1 { /* OSM-S USB_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2_oc>;
+ fsl,over-current-active-low;
+};
+
+&usdhc1 { /* eMMC */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_vdd_3v3>;
+ vqmmc-supply = <®_vdd_1v8>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ vmmc-supply = <®_usdhc2_vcc>;
+ vqmmc-supply = <®_nvcc_sd>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+ vmmc-supply = <®_usdhc3_vcc>;
+ vqmmc-supply = <®_nvcc_sd>;
+ cd-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_csi_mck: csimckgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x59 /* CAM_MCK */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 /* SPI_A_SDI_(IO0) */
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 /* SPI_A_SDO_(IO1) */
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 /* SPI_A_SCK */
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 /* SPI_A_CS0# */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 /* SPI_B_SDI */
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 /* SPI_B_SDO */
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 /* SPI_B_SCK */
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 /* SPI_B_CS0# */
+ >;
+ };
+
+ pinctrl_enet_rgmii: enetrgmiigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 /* ETH_MDC */
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 /* ETH_MDIO */
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 /* ETH_A_(R)(G)MII_RXD2 */
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 /* ETH_A_(R)(G)MII_RXD3 */
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_eqos_rgmii: eqosrgmiigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 /* ETH_B_MDC */
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 /* ETH_B_MDIO */
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 /* ETH_B_(S)(R)(G)MII_RXD0 */
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 /* ETH_B_(S)(R)(G)MII_RXD1 */
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 /* ETH_B_(R)(G)MII_RXD2 */
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 /* ETH_B_(R)(G)MII_RXD3 */
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 /* ETH_B_(R)(G)MII_RX_CLK */
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f /* ETH_B_(S)(R)(G)MII_TXD0 */
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f /* ETH_B_(S)(R)(G)MII_TXD1 */
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f /* ETH_B_(S)(R)(G)MII_TXD2 */
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f /* ETH_B_(S)(R)(G)MII_TXD3 */
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f /* ETH_B_(R)(G)MII_TX_CLK */
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__CAN1_TX 0x154 /* CAN_A_TX */
+ MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x154 /* CAN_A_RX */
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 /* CAN_B_TX */
+ MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154 /* CAN_B_RX */
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x19 /* GPIO_A_0 */
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x19 /* GPIO_A_1 */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 /* GPIO_A_2 */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 /* GPIO_A_3 */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 /* GPIO_A_4 */
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x19 /* GPIO_A_5 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x19 /* GPIO_A_7 */
+ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x19 /* GPIO_B_0 */
+ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x19 /* GPIO_B_1 */
+ MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x19 /* BOOT_SEL0# */
+ MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x19 /* BOOT_SEL1# */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* GPIO_B_5 */
+ MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x19 /* GPIO_B_6 */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19 /* GPIO_B_7 */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x19 /* GPIO_C_0 */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 /* GPIO_B_3 */
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 /* GPIO_B_4 */
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x19 /* GPIO_B_2 */
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19 /* GPIO_A_6 */
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 /* HDMI_HPD */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084 /* I2C_A_SCL */
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084 /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84 /* I2C_A_SCL */
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84 /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084 /* I2C_B_SCL */
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084 /* I2C_B_SDA */
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84 /* I2C_B_SCL */
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84 /* I2C_B_SDA */
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 /* PCIe_SMCLK */
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 /* PCIe_SMDAT */
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 /* PCIe_SMCLK */
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 /* PCIe_SMDAT */
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 /* I2C_CAM_SCL/CSI_TX_P */
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 /* I2C_CAM_SDA/CSI_TX_N */
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 /* I2C_CAM_SCL/CSI_TX_P */
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 /* I2C_CAM_SDA/CSI_TX_N */
+ >;
+ };
+
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x40000084
+ MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c5_gpio: i2c5gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x84
+ MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x84
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B 0x19 /* PCIe_CLKREQ# */
+ MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x19 /* PCIe_A_PERST# */
+ MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x19 /* PCIe_WAKE# */
+ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 /* PCIe_SM_ALERT */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x6 /* PWM_0 */
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT 0x6 /* PWM_1 */
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x6 /* PWM_2 */
+ >;
+ };
+
+ pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19 /* USB_A_EN */
+ >;
+ };
+
+ pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x19 /* USB_B_EN */
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x19 /* SDIO_A_PWR_EN */
+ >;
+ };
+
+ pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x19 /* SDIO_B_PWR_EN */
+ >;
+ };
+
+ pinctrl_reg_vdd_carrier: regvddcarriergrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x19 /* CARRIER_PWR_EN */
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x1c0
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 /* I2S_A_DATA_IN */
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 /* I2S_A_DATA_OUT */
+ MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0xd6 /* I2S_B_DATA_IN */
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01 0xd6 /* I2S_B_DATA_OUT */
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 /* I2S_MCLK */
+ MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC 0xd6 /* I2S_LRCLK */
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 /* I2S_BITCLK */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 /* UART_A_RX */
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 /* UART_A_TX */
+ MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x140 /* UART_A_CTS */
+ MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x140 /* UART_A_RTS */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 /* UART_C_RX */
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 /* UART_C_TX */
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 /* UART_CON_RX */
+ MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 /* UART_CON_TX */
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX 0x140 /* UART_B_RX */
+ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 /* UART_B_TX */
+ MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x140 /* UART_B_CTS */
+ MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x140 /* UART_B_RTS */
+ >;
+ };
+
+ pinctrl_usb1_id: usb1idgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c4 /* USB_A_ID */
+ >;
+ };
+
+ pinctrl_usb1_oc: usb1ocgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0 /* USB_A_OC# */
+ >;
+ };
+
+ pinctrl_usb2_id: usb2idgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID 0x1c4 /* USB_B_ID */
+ >;
+ };
+
+ pinctrl_usb2_oc: usb2ocgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x1c0 /* USB_B_OC# */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d0
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d0
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d0
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d0
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d4
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d4
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d4
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d4
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d6
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d6
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d6
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d6
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x196
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x19 /* SDIO_A_CD# */
+ >;
+ };
+
+ pinctrl_usdhc2_wp: usdhc2wpgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_WP__USDHC2_WP 0x400000d6 /* SDIO_A_WP */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x19 /* SDIO_B_CD# */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x19 /* SDIO_B_WP */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--
2.45.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/3] arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier
2024-07-02 15:43 [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Frieder Schrempf
2024-07-02 15:43 ` [PATCH 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards Frieder Schrempf
2024-07-02 15:43 ` [PATCH 2/3] arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board Frieder Schrempf
@ 2024-07-02 15:43 ` Frieder Schrempf
2024-07-03 14:27 ` [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Rob Herring (Arm)
3 siblings, 0 replies; 7+ messages in thread
From: Frieder Schrempf @ 2024-07-02 15:43 UTC (permalink / raw)
To: Conor Dooley, devicetree, imx, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel, Rob Herring, Sascha Hauer,
Shawn Guo
Cc: Frieder Schrempf, Alexander Stein, Fabio Estevam,
Gregor Herburger, Joao Paulo Goncalves, Mathieu Othacehe,
Pengutronix Kernel Team, Tim Harvey
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This adds support for the Kontron Electronics i.MX8MP SMARC module
(which uses the OSM-S i.MX8MP SoM) on the Kontron SMARC eval carrier.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../imx8mp-kontron-smarc-eval-carrier.dts | 224 +++++++++++++++
.../dts/freescale/imx8mp-kontron-smarc.dtsi | 271 ++++++++++++++++++
3 files changed, 496 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8688a85ba5a44..6d72558c1a9e3 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -175,6 +175,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
new file mode 100644
index 0000000000000..7b202049eb217
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-kontron-smarc.dtsi"
+
+/ {
+ model = "Kontron SMARC Eval Carrier with i.MX8MP";
+ compatible = "kontron,imx8mp-smarc-eval-carrier", "kontron,imx8mp-smarc",
+ "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usbc: usbc {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_id>;
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "imx8mp-wm8904";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Headphone Jack", "MICBIAS",
+ "IN1L", "Headphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Headphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ sound-dai = <&wm8904>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+ };
+};
+
+&ecspi1 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <60000000>;
+ };
+};
+
+&ecspi2 {
+ status = "okay";
+};
+
+&eqos {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&flexcan2 {
+ status = "okay";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ AVDD-supply = <®_vdd_1v8>;
+ CPVDD-supply = <®_vdd_1v8>;
+ DBVDD-supply = <®_vdd_1v8>;
+ DCVDD-supply = <®_vdd_1v8>;
+ MICVDD-supply = <®_vdd_3v3>;
+ };
+
+ carrier_gpio2: tca9554@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sai3 {
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+
+ dr_mode = "otg";
+ extcon = <&extcon_usbc>;
+ usb-role-switch;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ vmmc-supply = <®_vdd_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
new file mode 100644
index 0000000000000..936849c5ecd4f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+ model = "Kontron SMARC i.MX8MP";
+ compatible = "kontron,imx8mp-smarc", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_rgmii>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy1>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_rgmii>;
+ phy-connection-type = "rgmii-id";
+ phy-handle = <ðphy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ * GPIO_A_2 -> GPIO0
+ * GPIO_A_3 -> GPIO1
+ * GPIO_A_4 -> GPIO2
+ * GPIO_A_5 -> GPIO3
+ * USB_B_EN -> n.a.
+ * USB_B_ID -> n.a.
+ * USB_B_OC -> n.a.
+ */
+&gpio1 {
+ gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+ "", "GPIO0", "GPIO1", "GPIO2",
+ "GPIO3", "", "USB_A_ID", "",
+ "USB_A_EN", "USB_A_OC","CAM_MCK", "",
+ "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+ "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+ "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+ "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ * SDIO_A_CD -> SDIO_CD
+ * SDIO_A_CLK -> SDIO_CK
+ * SDIO_A_CMD -> SDIO_CMD
+ * SDIO_A_D0 -> SDIO_D0
+ * SDIO_A_D1 -> SDIO_D1
+ * SDIO_A_D2 -> SDIO_D2
+ * SDIO_A_D3 -> SDIO_D3
+ * SDIO_A_PWR_EN -> SDIO_PWR_EN
+ * SDIO_A_WP -> SDIO_WP
+ */
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+ "SDIO_CD", "SDIO_CK", "SDIO_CMD", "SDIO_D0",
+ "SDIO_D1", "SDIO_D2", "SDIO_D3", "SDIO_PWR_EN",
+ "SDIO_WP";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ * PCIE_CLKREQ -> PCIE_A_CKREQ
+ * PCIE_A_PERST -> PCIE_A_RST
+ * SDIO_B_D5 -> n.a.
+ * SDIO_B_D6 -> n.a.
+ * SDIO_B_D7 -> n.a.
+ * SPI_A_WP -> n.a.
+ * SPI_A_HOLD -> n.a.
+ * UART_B_RTS -> SER2_RTS
+ * UART_B_CTS -> SER2_CTS
+ * SDIO_B_D0 -> GPIO_8
+ * SDIO_B_D1 -> GPIO_9
+ * SDIO_B_D2 -> GPIO_10
+ * SDIO_B_D3 -> GPIO_11
+ * SDIO_B_WP -> n.a.
+ * SDIO_B_D4 -> n.a.
+ * PCIE_SM_ALERT -> SMB_ALERT
+ * SDIO_B_CLK -> GPIO_6
+ * SDIO_B_CMD -> GPIO_7
+ * GPIO_B_0 -> LCD0_BKLT_EN
+ * GPIO_B_1 -> LCD1_BKLT_EN
+ * BOOT_SEL0 -> BOOT_SEL2
+ * SDIO_B_CD -> n.a.
+ * SDIO_B_PWR_EN -> n.a.
+ * HDMI_CEC -> n.a.
+ * SDIO_B_PWR_EN -> n.a.
+ */
+&gpio3 {
+ pinctrl-0 = <&pinctrl_gpio3>, <&pinctrl_gpio3_smarc>;
+ gpio-line-names = "PCIE_WAKE", "PCIE_A_CKREQ", "PCIE_A_RST", "",
+ "", "", "", "",
+ "SER2_RTS", "SER2_CTS", "GPIO_8", "GPIO_9",
+ "GPIO_10", "GPIO_11", "", "",
+ "SMB_ALERT", "GPIO_6", "GPIO_7", "LCD0_BKLT_EN",
+ "LCD1_BKLT_EN", "", "BOOT_SEL2", "BOOT_SEL1",
+ "", "", "", "",
+ "", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ * GPIO_B_5 -> n.a.
+ * GPIO_B_6 -> n.a.
+ * GPIO_B_7 -> n.a.
+ * GPIO_C_0 -> LED
+ * GPIO_B_3 -> ETH2_INT
+ * GPIO_B_4 -> USB_HUB_RST
+ * GPIO_B_2 -> ETH1_INT
+ * GPIO_A_6 -> GPIO4
+ * CAN_A_TX -> CAN0_TX
+ * UART_A_CTS -> SER0_CTS
+ * UART_A_RTS -> SER0_RTS
+ * CAN_A_RX -> CAN0_RX
+ * CAN_B_TX -> CAN1_TX
+ * CAN_B_RX -> CAN1_RX
+ * GPIO_A_7 -> TEST
+ * I2S_A_DATA_IN -> I2S0_SDIN
+ * I2S_LRCLK -> I2S0_LRCK
+ */
+&gpio4 {
+ gpio-line-names = "", "", "", "LED",
+ "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+ "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+ "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH2_INT", "USB_HUB_RST",
+ "ETH1_INT", "GPIO4", "CAN0_TX", "SER0_CTS",
+ "SER0_RTS", "CAN0_RX", "CAN1_TX", "CAN1_RX",
+ "TEST", "CARRIER_PWR_EN", "I2S0_SDIN", "I2S0_LRCK";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ * I2S_BITCLK -> I2S0_CK
+ * I2S_A_DATA_OUT -> I2S0_SDOUT
+ * I2S_MCLK -> AUDIO_MCK
+ * PWM_2 -> GPIO5
+ * PWM_1 -> LCD1_BKLT_PWM
+ * PWM_0 -> LCD0_BKLT_PWM
+ * SPI_A_SCK -> SPI0_CK
+ * SPI_A_SDO -> SPI0_DO
+ * SPI_A_SDI -> SPI0_DIN
+ * SPI_A_CS0 -> SPI0_CS0
+ * SPI_B_SCK -> ESPI_CK
+ * SPI_B_SDO -> ESPI_IO_0
+ * SPI_B_SDI -> ESPI_IO_1
+ * SPI_B_CS0 -> ESPI_CS0
+ * I2C_A_SCL -> I2C_PM_CK
+ * I2C_A_SDA -> I2C_PM_DAT
+ * I2C_B_SCL -> I2C_GP_CK
+ * I2C_B_SDA -> I2C_GP_DAT
+ * PCIE_SMCLK -> HDMI_CTRL_CK
+ * PCIE_SMDAT -> HDMI_CTRL_DAT
+ * I2C_CAM_SCL -> I2C_CAM1_CK
+ * I2C_CAM_SDA -> I2C_CAM1_DAT
+ * UART_A_RX -> SER0_RX
+ * UART_A_TX -> SER0_TX
+ * UART_C_RX -> SER3_RX
+ * UART_C_TX -> SER3_TX
+ * UART_CON_RX -> SER1_RX
+ * UART_CON_TX -> SER1_TX
+ * UART_B_RX -> SER2_RX
+ * UART_B_TX -> SER2_TX
+ */
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio5_smarc>;
+ gpio-line-names = "I2S0_CK", "I2S0_SDOUT", "AUDIO_MCK", "GPIO5",
+ "LCD1_BKLT_PWM", "LCD0_BKLT_PWM", "SPI0_CK", "SPI0_DO",
+ "SPI0_DIN", "SPI0_CS0", "ESPI_CK", "ESPI_IO_0",
+ "ESPI_IO_1", "ESPI_CS0", "I2C_PM_CK", "I2C_PM_DAT",
+ "I2C_GP_CK", "I2C_GP_DAT", "HDMI_CTRL_CK", "HDMI_CTRL_DAT",
+ "I2C_CAM1_CK", "I2C_CAM1_DAT", "SER0_RX", "SER0_TX",
+ "SER3_RX", "SER3_TX", "SER1_RX", "SER1_TX",
+ "SER2_RX", "SER2_TX";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usb3_1 {
+ fsl,disable-port-power-control;
+ fsl,permanently-attached;
+};
+
+&iomuxc {
+ pinctrl_ethphy0: ethphy0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x46
+ >;
+ };
+
+ pinctrl_ethphy1: ethphy1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x46
+ >;
+ };
+
+ pinctrl_gpio3_smarc: gpio3smarcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10 0x1d0 /* SMARC GPIO8 */
+ MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11 0x1d0 /* SMARC GPIO9 */
+ MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12 0x1d0 /* SMARC GPIO10 */
+ MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13 0x1d0 /* SMARC GPIO11 */
+ MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17 0x190 /* SMARC GPIO6 */
+ MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18 0x1d0 /* SMARC GPIO7 */
+ >;
+ };
+
+ pinctrl_gpio5_smarc: gpio5smarcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1d0 /* SMARC GPIO5 */
+ >;
+ };
+};
--
2.45.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards
2024-07-02 15:43 [PATCH 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards Frieder Schrempf
` (2 preceding siblings ...)
2024-07-02 15:43 ` [PATCH 3/3] arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier Frieder Schrempf
@ 2024-07-03 14:27 ` Rob Herring (Arm)
3 siblings, 0 replies; 7+ messages in thread
From: Rob Herring (Arm) @ 2024-07-03 14:27 UTC (permalink / raw)
To: Frieder Schrempf
Cc: imx, Hiago De Franco, Pengutronix Kernel Team, Tim Harvey,
Sascha Hauer, Alexander Stein, Krzysztof Kozlowski,
Francesco Dolcini, Krzysztof Kozlowski, Fabio Estevam, Shawn Guo,
Marco Felsch, Conor Dooley, Frieder Schrempf, Markus Niebel,
devicetree, linux-arm-kernel, Hugo Villeneuve, Gregor Herburger,
Li Yang, Bjorn Helgaas, Conor Dooley, linux-kernel,
Joao Paulo Goncalves
On Tue, 02 Jul 2024 17:43:18 +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> Patch 1: board DT bindings
> Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees
> Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees
>
> Frieder Schrempf (3):
> dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
> arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier
> board
> arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval
> carrier
>
> .../devicetree/bindings/arm/fsl.yaml | 13 +
> arch/arm64/boot/dts/freescale/Makefile | 6 +
> .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++
> .../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++
> .../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++
> .../imx8mp-kontron-smarc-eval-carrier.dts | 224 +++++
> .../dts/freescale/imx8mp-kontron-smarc.dtsi | 271 ++++++
> 7 files changed, 1841 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
>
> --
> 2.45.2
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y freescale/imx8mp-kontron-bl-osm-s.dtb freescale/imx8mp-kontron-smarc-eval-carrier.dtb' for 20240702154413.968044-1-frieder@fris.de:
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
'onnn,n24s64b' does not match 'c00$'
'onnn,n24s64b' does not match 'c01$'
'onnn,n24s64b' does not match 'cs01$'
'onnn,n24s64b' does not match 'c02$'
'onnn,n24s64b' does not match 'cs02$'
'onnn,n24s64b' does not match 'mac402$'
'onnn,n24s64b' does not match 'mac602$'
'onnn,n24s64b' does not match 'c04$'
'onnn,n24s64b' does not match 'cs04$'
'onnn,n24s64b' does not match 'c08$'
'onnn,n24s64b' does not match 'cs08$'
'onnn,n24s64b' does not match 'c16$'
'onnn,n24s64b' does not match 'cs16$'
'onnn,n24s64b' does not match 'c32$'
'onnn,n24s64b' does not match 'cs32$'
'onnn,n24s64b' does not match 'c64$'
'onnn,n24s64b' does not match 'cs64$'
'onnn,n24s64b' does not match 'c128$'
'onnn,n24s64b' does not match 'cs128$'
'onnn,n24s64b' does not match 'c256$'
'onnn,n24s64b' does not match 'cs256$'
'onnn,n24s64b' does not match 'c512$'
'onnn,n24s64b' does not match 'cs512$'
'onnn,n24s64b' does not match 'c1024$'
'onnn,n24s64b' does not match 'cs1024$'
'onnn,n24s64b' does not match 'c1025$'
'onnn,n24s64b' does not match 'cs1025$'
'onnn,n24s64b' does not match 'c2048$'
'onnn,n24s64b' does not match 'cs2048$'
'onnn,n24s64b' does not match 'spd$'
'atmel,24c64' does not match 'c00$'
'atmel,24c64' does not match 'c01$'
'atmel,24c64' does not match 'cs01$'
'atmel,24c64' does not match 'c02$'
'atmel,24c64' does not match 'cs02$'
'atmel,24c64' does not match 'mac402$'
'atmel,24c64' does not match 'mac602$'
'atmel,24c64' does not match 'c04$'
'atmel,24c64' does not match 'cs04$'
'atmel,24c64' does not match 'c08$'
'atmel,24c64' does not match 'cs08$'
'atmel,24c64' does not match 'c16$'
'atmel,24c64' does not match 'cs16$'
'atmel,24c64' does not match 'c32$'
'atmel,24c64' does not match 'cs32$'
'atmel,24c64' does not match 'cs64$'
'atmel,24c64' does not match 'c128$'
'atmel,24c64' does not match 'cs128$'
'atmel,24c64' does not match 'c256$'
'atmel,24c64' does not match 'cs256$'
'atmel,24c64' does not match 'c512$'
'atmel,24c64' does not match 'cs512$'
'atmel,24c64' does not match 'c1024$'
'atmel,24c64' does not match 'cs1024$'
'atmel,24c64' does not match 'c1025$'
'atmel,24c64' does not match 'cs1025$'
'atmel,24c64' does not match 'c2048$'
'atmel,24c64' does not match 'cs2048$'
'atmel,24c64' does not match 'spd$'
['onnn,n24s64b', 'atmel,24c64'] is too long
'onnn,n24s64b' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'
'belling,bl24c16a' was expected
'onnn,n24s64b' is not one of ['rohm,br24g01', 'rohm,br24t01']
'onnn,n24s64b' is not one of ['nxp,se97b', 'renesas,r1ex24002']
'onnn,n24s64b' is not one of ['onnn,cat24c04', 'onnn,cat24c05', 'rohm,br24g04']
'renesas,r1ex24016' was expected
'giantec,gt24c32a' was expected
'onnn,n24s64b' is not one of ['renesas,r1ex24128', 'samsung,s524ad0xd1']
'onnn,n24s64b' does not match '^atmel,24c(32|64)d-wl$'
'atmel,24c16' was expected
'atmel,24c01' was expected
'atmel,24c02' was expected
'atmel,24c04' was expected
'atmel,24c32' was expected
'atmel,24c128' was expected
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: eeprom@50: Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: /soc@0/bus@30800000/i2c@30ad0000/eeprom@50: failed to match any schema with compatible: ['onnn,n24s64b', 'atmel,24c64']
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
'onnn,n24s64b' does not match 'c00$'
'onnn,n24s64b' does not match 'c01$'
'onnn,n24s64b' does not match 'cs01$'
'onnn,n24s64b' does not match 'c02$'
'onnn,n24s64b' does not match 'cs02$'
'onnn,n24s64b' does not match 'mac402$'
'onnn,n24s64b' does not match 'mac602$'
'onnn,n24s64b' does not match 'c04$'
'onnn,n24s64b' does not match 'cs04$'
'onnn,n24s64b' does not match 'c08$'
'onnn,n24s64b' does not match 'cs08$'
'onnn,n24s64b' does not match 'c16$'
'onnn,n24s64b' does not match 'cs16$'
'onnn,n24s64b' does not match 'c32$'
'onnn,n24s64b' does not match 'cs32$'
'onnn,n24s64b' does not match 'c64$'
'onnn,n24s64b' does not match 'cs64$'
'onnn,n24s64b' does not match 'c128$'
'onnn,n24s64b' does not match 'cs128$'
'onnn,n24s64b' does not match 'c256$'
'onnn,n24s64b' does not match 'cs256$'
'onnn,n24s64b' does not match 'c512$'
'onnn,n24s64b' does not match 'cs512$'
'onnn,n24s64b' does not match 'c1024$'
'onnn,n24s64b' does not match 'cs1024$'
'onnn,n24s64b' does not match 'c1025$'
'onnn,n24s64b' does not match 'cs1025$'
'onnn,n24s64b' does not match 'c2048$'
'onnn,n24s64b' does not match 'cs2048$'
'onnn,n24s64b' does not match 'spd$'
'atmel,24c64' does not match 'c00$'
'atmel,24c64' does not match 'c01$'
'atmel,24c64' does not match 'cs01$'
'atmel,24c64' does not match 'c02$'
'atmel,24c64' does not match 'cs02$'
'atmel,24c64' does not match 'mac402$'
'atmel,24c64' does not match 'mac602$'
'atmel,24c64' does not match 'c04$'
'atmel,24c64' does not match 'cs04$'
'atmel,24c64' does not match 'c08$'
'atmel,24c64' does not match 'cs08$'
'atmel,24c64' does not match 'c16$'
'atmel,24c64' does not match 'cs16$'
'atmel,24c64' does not match 'c32$'
'atmel,24c64' does not match 'cs32$'
'atmel,24c64' does not match 'cs64$'
'atmel,24c64' does not match 'c128$'
'atmel,24c64' does not match 'cs128$'
'atmel,24c64' does not match 'c256$'
'atmel,24c64' does not match 'cs256$'
'atmel,24c64' does not match 'c512$'
'atmel,24c64' does not match 'cs512$'
'atmel,24c64' does not match 'c1024$'
'atmel,24c64' does not match 'cs1024$'
'atmel,24c64' does not match 'c1025$'
'atmel,24c64' does not match 'cs1025$'
'atmel,24c64' does not match 'c2048$'
'atmel,24c64' does not match 'cs2048$'
'atmel,24c64' does not match 'spd$'
['onnn,n24s64b', 'atmel,24c64'] is too long
'onnn,n24s64b' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'
'belling,bl24c16a' was expected
'onnn,n24s64b' is not one of ['rohm,br24g01', 'rohm,br24t01']
'onnn,n24s64b' is not one of ['nxp,se97b', 'renesas,r1ex24002']
'onnn,n24s64b' is not one of ['onnn,cat24c04', 'onnn,cat24c05', 'rohm,br24g04']
'renesas,r1ex24016' was expected
'giantec,gt24c32a' was expected
'onnn,n24s64b' is not one of ['renesas,r1ex24128', 'samsung,s524ad0xd1']
'onnn,n24s64b' does not match '^atmel,24c(32|64)d-wl$'
'atmel,24c16' was expected
'atmel,24c01' was expected
'atmel,24c02' was expected
'atmel,24c04' was expected
'atmel,24c32' was expected
'atmel,24c128' was expected
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: eeprom@50: Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: /soc@0/bus@30800000/i2c@30ad0000/eeprom@50: failed to match any schema with compatible: ['onnn,n24s64b', 'atmel,24c64']
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: /usbc: failed to match any schema with compatible: ['linux,extcon-usb-gpio']
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: /usbc: failed to match any schema with compatible: ['linux,extcon-usb-gpio']
^ permalink raw reply [flat|nested] 7+ messages in thread