From: dth@ncc1701.cistron.net (Danny ter Haar)
To: linux-kernel@vger.kernel.org
Subject: 2.6.0-test[56] pcnet32 problems
Date: Tue, 30 Sep 2003 03:13:11 +0000 (UTC) [thread overview]
Message-ID: <blasc7$jfi$1@news.cistron.nl> (raw)
Got an cyrix box with built in ethernet & 2 extra ethernet cards
as a firewall at home with a dsl line (connected to eth0)
pcnet32.c:v1.27b 01.10.2002 tsbogend@alpha.franken.de
PCI: Found IRQ 11 for device 0000:00:0f.0
IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 11
pcnet32: PCnet/FAST III 79C973 at 0xfca0, warning: CSR address invalid,
using instead PROM address of 00 00 e2 24 41 1d assigned IRQ 9.
eth0: registered as PCnet/FAST III 79C973
pcnet32: 1 cards_found.
Sometimes (even during low traffic) eth0 simply locks up:
In dmesg i see:
kernel: eth0: Bus master arbitration failure, status 88f3.
rmmod pcnet32 results in kernel-panic.
Only reboot works.
tried:
acpi == disabled
pci=noacpi
Another weird thing is output of ifconfig eth0:
eth0 Link encap:Ethernet HWaddr 00:00:E2:24:41:1D
inet addr:195.64.94.48 Bcast:195.64.94.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30345 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:16042 dropped:0 overruns:0 carrier:16042
collisions:0 txqueuelen:1000
RX bytes:38404293 (36.6 MiB) TX bytes:1298028 (1.2 MiB)
Interrupt:9 Base address:0xfca0
0 packets transmitted , all errors ans carrier faults ?
Still it works! (this could be counters that are wrong)
kernel config, lspci -v and dmesg output available at:
http://dth.net/kernel/
Any help/suggestions/hints appreciated.
Danny
--
/"\ | Dying is to be avoided because
\ / ASCII RIBBON CAMPAIGN | it can ruin your whole career
X against HTML MAIL |
/ \ and POSTINGS | - Bob Hope
next reply other threads:[~2003-09-30 3:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-30 3:13 Danny ter Haar [this message]
2003-09-30 4:56 ` 2.6.0-test[56] pcnet32 problems Vojtech Pavlik
2003-09-30 6:26 ` Danny ter Haar
2003-09-30 5:18 ` Barry K. Nathan
2003-09-30 6:35 ` Danny ter Haar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='blasc7$jfi$1@news.cistron.nl' \
--to=dth@ncc1701.cistron.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox