Re: [PATCH net-next v1 3/8] net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()

[<Arun.Ramadoss@microchip.com>]

Hi Oleksij,

On Tue, 2024-04-02 at 15:13 +0200, Oleksij Rempel wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> Refactor ksz8_fdb_dump() to address potential issues:
> - Limit the number of iterations to avoid endless loops.
> - Handle error codes returned by ksz8_r_dyn_mac_table(), with
>   an exception for -ENXIO when no more dynamic entries are detected.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  drivers/net/dsa/microchip/ksz8795.c     | 38 ++++++++++++++---------
> --
>  drivers/net/dsa/microchip/ksz8795_reg.h |  1 +
>  2 files changed, 23 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/dsa/microchip/ksz8795.c
> b/drivers/net/dsa/microchip/ksz8795.c
> index e407111db6637..b70aa2c0a85ec 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -1191,27 +1191,33 @@ void ksz8_flush_dyn_mac_table(struct
> ksz_device *dev, int port)
>  int ksz8_fdb_dump(struct ksz_device *dev, int port,
>                   dsa_fdb_dump_cb_t *cb, void *data)
>  {
> -       int ret = 0;
> -       u16 i = 0;
>         u16 entries = 0;
> -       u8 fid;
> -       u8 src_port;
> -       u8 mac[ETH_ALEN];
> +       int ret, i;
> +
> +       for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
> +               u8 mac[ETH_ALEN];
> +               u8 src_port;
> +               u8 fid;

IMO:Since there is no code other than for loop in this function,
variable declaraion can be as before.

> 
> -       do {
>                 ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid,
> &src_port,
>                                            &entries);
> -               if (!ret && port == src_port) {
> -                       ret = cb(mac, fid, false, data);
> -                       if (ret)
> -                               break;
> -               }
> -               i++;
> -       } while (i < entries);
> -       if (i >= entries)
> -               ret = 0;
> +               if (ret == -ENXIO)
> +                       return 0;
> +               if (ret)
> +                       return ret;
> 
> -       return ret;
> +               if (i >= entries)
> +                       return 0;
> +
> +               if (port != src_port)
> +                       continue;

IMO: since already many returns in function, if above statement
replaced as below will increase readability.

	if (port == src_port) {
		ret = cb(mac, fid, false, data);
		if (ret)
			return ret;
	}
> +
> +               ret = cb(mac, fid, false, data);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       return 0;
>  }
> 
>  static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
> diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h
> b/drivers/net/dsa/microchip/ksz8795_reg.h
> index 7c9341ef73b03..0d13a6e29b0e6 100644
> --- a/drivers/net/dsa/microchip/ksz8795_reg.h
> +++ b/drivers/net/dsa/microchip/ksz8795_reg.h
> @@ -794,5 +794,6 @@
>  #define TAIL_TAG_LOOKUP                        BIT(7)
> 
>  #define FID_ENTRIES                    128
> +#define KSZ8_DYN_MAC_ENTRIES           1024
> 
>  #endif
> --
> 2.39.2
>