2.6.5-rc3-mm1

2.6.5-rc3-mm1

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5-rc3/2.6.5-rc3-mm1/

- Dropped the tty locking fix.  As predicted, it deadlocked.  I also
  reverted the patch from bk-driver-core.patch which is causing this race to
  trigger more frequently.

- Added the rest of Ingo's recent CPU scheduler work.  This is for people
  to compare with 2.6.5-rc2-mm5.




Changes since 2.6.5-rc2-mm5:


 bk-alsa.patch
 bk-driver-core.patch
 bk-i2c.patch
 bk-ieee1394.patch
 bk-input.patch
 bk-netdev.patch
 bk-pci.patch
 bk-scsi.patch
 bk-usb.patch
 bk-cpufreq.patch

 External trees

-ppc32-preempt-fixes.patch
-ppc32-sector_t-fix.patch
-nfsd-readdir_plus-fix.patch
-md-sector_t-fixes.patch
-md-sector_t-fixes-fix.patch
-SCHED_FIFO-fix.patch
-slab-vs-cpu-hotplug-fix.patch
-cmpci-warning-fixes.patch
-ptrace-use-correct-task.patch
-opl3sa2-warning-fix.patch
-cciss-MSA30-support.patch
-cciss-ENXIO-fix.patch
-stack-reductions-ice1712.patch
-ide-pm-undebug.patch
-x86-defconfig-update.patch
-proc-swaps-tidiness.patch
-viocd-proc-partitions.patch
-parport-daisy-undef-DEBUG.patch
-inode-dirtying-timestamp-fix.patch

 Merged

+sysfs-class-10-vc-revert.patch

 Avoid the tty oops

-tty-locking-again.patch

 Dropped

+sched-domain-setup-lock.patch
+sched-domain-setup-lock-ppc64-fix.patch
+sched-ingo-rollup.patch

 CPU scheduler work

+noexec-stack-ia64-fix.patch

 Make the noexec-stack code compile on ia64.

 This may be wrong, but this kernel oopses fairly quickly on ia64 anyway,
 due to problems in remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch

+early-param-i386-nolapic-fix.patch

 make the `nolapic' option an __early_param.

+fget-speedup.patch

 Save a few instructions in fget() and fget_light()

+ksoftirqd-barrier.patch

 Add missing barriers

+max_map_count-sysctl.patch

 /proc/sys/vm/max_map_count

+move-__this_module-to-modpost.patch

 Module cleanup

+support-zerobased-floppies.patch

 Support floppies which start at sector 0

+loop-bd_setsize-fix.patch

 Fix setting of the size of loop devices

+yenta-TI-irq-routing-fix.patch

 PCMCIA IRQ routing fix

+earlier-page_address_init.patch

 Run page_address_init() earlier.

+remove-bitmap-length-limits.patch

 bitmap stuff.

+pdflush-nice-0.patch

 Run pdflush at `nice 0'.

+rw_swap_page_sync-fix.patch

 Really add pages to swapcache in rw_swap_page_sync().  Will fix BUG() with
 swsusp resume.

+early-identify-cpu.patch

 Identify the x86 CPU capabilities much earlier: we need to know these
 things during early bootup.





All 326 patches:


bk-alsa.patch

bk-driver-core.patch

bk-i2c.patch

bk-ieee1394.patch

bk-input.patch

bk-netdev.patch

bk-pci.patch

bk-scsi.patch

bk-usb.patch

bk-cpufreq.patch

mm.patch
  add -mmN to EXTRAVERSION

gcc-35-epautoconf-build-fix.patch
  drivers/usb/gadget/epautoconf.c gcc-3.5 build fix

sysfs-class-10-vc-revert.patch
  revert the sysfs-class-for-vc's patch

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix
  kgdb buffer overflow fix
  kgdbL warning fix
  kgdb: CONFIG_DEBUG_INFO fix
  x86_64 fixes
  correct kgdb.txt Documentation link (against  2.6.1-rc1-mm2)

kgdb-ga-recent-gcc-fix.patch
  kgdb: fix for recent gcc

kgdboe-netpoll.patch
  kgdb-over-ethernet via netpoll

kgdboe-configuration-logic-fix.patch
  kgdboe: fix configuration of MAC address

kgdboe-configuration-logic-fix-fix.patch

kgdboe-non-ia32-build-fix.patch

kgdb-warning-fixes.patch
  kgdb warning fixes

kgdb-x86_64-support.patch
  kgdb-x86_64-support.patch for 2.6.2-rc1-mm3

kgdb-THREAD_SIZE-fixes.patch
  THREAD_SIZE fixes for kgdb

vt-cleanup.patch
  vt.c cleanup

con_open-speedup.patch
  con_open() speedup/cleanup

remove-down_tty_sem.patch
  remove down_tty_sem()

kconfig-url-fixes.patch
  Fix URLs in Kconfig files

Lindent-devfs.patch
  feed devfs through Lindent

must-fix.patch
  must fix lists update
  must fix list update
  mustfix update

must-fix-update-5.patch
  must-fix update

i4l-kernelcapi-rework.patch
  i4l: kernelcapi receive workqueue and locking rework

types_h-needs-config_h.patch
  types.h needs config.h

ppc64-reloc_hide.patch

quota-locking-fixes.patch
  Quota locking fixes

quota-locking-fixes-update.patch
  quota locking fix - new version

ext3-journalled-quotas.patch
  Journalled quota patch

ext3-journalled-quotas-export.patch
  ext3-journalled-quotas export

inode-cleanup.patch
  fs/inode.c list_head cleanup

initramfs-search-for-init-orig.patch
  search for /init for initramfs boots

invalidate_inodes-speedup.patch
  invalidate_inodes speedup
  more invalidate_inodes speedup fixes

cfq-4.patch
  CFQ io scheduler
  CFQ fixes

config_spinline.patch
  uninline spinlocks for profiling accuracy.

pdflush-diag.patch

get_user_pages-handle-VM_IO.patch
  fix get_user_pages() against mappings of /dev/mem

pci_set_power_state-might-sleep.patch

CONFIG_STANDALONE-default-to-n.patch
  Make CONFIG_STANDALONE default to N

extra-buffer-diags.patch

CONFIG_SYSFS.patch
  From: Pat Mochel <mochel@osdl.org>
  Subject: [PATCH] Add CONFIG_SYSFS

CONFIG_SYSFS-boot-from-disk-fix.patch

selinux-inode-race-trap.patch
  Try to diagnose Bug 2153

slab-leak-detector.patch
  slab leak detector
  mm/slab.c warning in cache_alloc_debugcheck_after

scale-nr_requests.patch
  scale nr_requests with TCQ depth

truncate_inode_pages-check.patch

local_bh_enable-warning-fix.patch

nfs-01-prepare_nfspage.patch
  Subject: [PATCH] Prepare NFS asynchronous read/write structures for 	rsize/wsize < PAGE_SIZE

nfs-02-small_rsize.patch
  Subject: [PATCH] Add asynchronous read support for rsize<PAGE_SIZE

nfs-02-small_rsize-warning-fixes.patch
  Fix nfs-02-small_rsize ppc64 warnings

nfs-03-small_wsize.patch
  Subject: [PATCH] Add asynchronous write support for wsize<PAGE_SIZE

nfs-03-small_wsize-warning-fixes.patch
  Fix ppc64 warnings in nfs-03-small_wsize patch

nfs-04-congestion.patch
  Subject: [PATCH] Throttle writes when memory pressure forces a flush

nfs-05-unrace.patch
  Subject: [PATCH] Remove a couple of races in RPC layer...

nfs-06-rpc_throttle.patch
  Subject: [PATCH] add fair queueing to the RPC scheduler.

nfs-07-rpc_fixes.patch
  Subject: [PATCH] Close some potential scheduler races in rpciod.

nfs-08-short_rw.patch
  Subject: [PATCH] Add support for short reads/writes (< rsize/wsize)

nfsv4-updates.patch
  nfsv4 updates

knfsd-01-oops-fix.patch
  knfsd: Return -EOPNOTSUPP when unknown mechanism name encountered

knfsd-02-auth-error-return-fix.patch
  knfsd: Minor fix to error return when updating server authentication information

knfsd-03-auth_error-formatting-fix.patch
  knfsd: fix a problem with incorrectly formatted auth_error returns.

knfsd-04-remove-name_lookup_h.patch
  knfsd: Remove name_lookup.h that noone is using anymore.

knfsd-05-mounted_on_fileid-support.patch
  knfsd: Add server-side support for the nfsv4 mounted_on_fileid attribute.

knfsd-06-UTF8-improvements.patch
  knfsd: Improve UTF8 checking.

knfsd-07-auth_gss-export.patch
  knfsd: Export a symbol needed by auth_gss

knfsd-08-gss-integrity.patch
  knfsd: Add data integrity to serve rside gss

sched-run_list-cleanup.patch
  small scheduler cleanup

sched-find_busiest_node-resolution-fix.patch
  sched: improved resolution in find_busiest_node

sched-domains.patch
  sched: scheduler domain support
  sched: fix for NR_CPUS > BITS_PER_LONG
  sched: clarify find_busiest_group
  sched: find_busiest_group arithmetic fix

sched-sibling-map-to-cpumask.patch
  sched: cpu_sibling_map to cpu_mask
  p4-clockmod sibling_map fix
  p4-clockmod: handle more than two siblings

sched-domains-i386-ht.patch
  sched: implement domains for i386 HT
  sched: Fix CONFIG_SMT oops on UP
  sched: fix SMT + NUMA bug
  Change arch_init_sched_domains to use cpu_online_map
  Fix build with NR_CPUS > BITS_PER_LONG

sched-no-drop-balance.patch
  sched: handle inter-CPU jiffies skew

sched-directed-migration.patch
  sched_balance_exec(): don't fiddle with the cpus_allowed mask

sched-domain-debugging.patch
  sched_domain debugging

sched-domain-balancing-improvements.patch
  scheduler domain balancing improvements

sched-group-power.patch
  sched-group-power
  sched-group-power warning fixes

sched-domains-use-cpu_possible_map.patch
  sched_domains: use cpu_possible_map

sched-smt-nice-handling.patch
  sched: SMT niceness handling

sched-local-load.patch
  sched: add local load metrics

process-migration-speedup.patch
  Reduce TLB flushing during process migration

sched-trivial.patch
  sched: trivial fixes, cleanups

sched-misc-fixes.patch
  sched: misc fixes

sched-wakebalance-fixes.patch
  sched: wakeup balancing fixes

sched-imbalance-fix.patch
  sched: fix imbalance calculations

sched-altix-tune1.patch
  sched: altix tuning

sched-fix-activelb.patch
  sched: oops fix

ppc64-sched-domain-support.patch
  ppc64: sched-domain support

sched-domain-setup-lock.patch
  sched: fix setup races

sched-domain-setup-lock-ppc64-fix.patch

sched-ingo-rollup.patch
  sched: Ingo's leftover bits

fa311-mac-address-fix.patch
  wrong mac address with netgear FA311 ethernet card

pid_max-fix.patch
  Bug when setting pid_max > 32k

use-soft-float.patch
  Use -msoft-float

DRM-cvs-update.patch
  DRM cvs update

drm-include-fix.patch

non-readable-binaries.patch
  Handle non-readable binfmt_misc executables

binfmt_misc-credentials.patch
  binfmt_misc: improve calaulation of interpreter's credentials

lightweight-auditing-framework.patch
  Light-weight Auditing Framework

lightweight-auditing-framework-update-1.patch
  Light-weight Auditing Framework update

lightweight-auditing-framework-warning-fix.patch
  lightweight-auditing-framework warning fixes

lightweight-auditing-framework-receive-filter-fixes.patch
  Light-weight Auditing Framework receive filter fixes

lightweight-auditing-framework-receive-filter-fixes-fix.patch
  lightweight-auditing-framework-receive-filter-fixes compile fix

selinux-compute_sid-fixes.patch
  selinux: Audit compute_sid errors

selinux-remove-ratelimit.patch
  selinux: remove ratelimit from avc

per-node-rss-tracking.patch
  Track per-node RSS for NUMA

aic7xxx-deadlock-fix.patch
  aic7xxx deadlock fix

poll-select-longer-timeouts.patch
  poll()/select(): support longer timeouts

poll-select-range-check-fix.patch
  poll()/select() range checking fix

poll-select-handle-large-timeouts.patch
  poll()/select(): handle long timeouts

mixart-build-fix.patch
  CONFIG_SND_MIXART doesn't compile

add-a-slab-for-ethernet.patch
  Add a kmalloc slab for ethernet packets

mq-01-codemove.patch
  posix message queues: code move

mq-02-syscalls.patch
  posix message queues: syscall stubs

mq-03-core.patch
  posix message queues: implementation

mq-03-core-update.patch
  posix message queues: update to core patch

mq-04-linuxext-poll.patch
  posix message queues: linux-specific poll extension

mq-05-linuxext-mount.patch
  posix message queues: made user mountable

mq-update-01.patch
  posix message queue update

mq-security-fix.patch
  security bugfix for mqueue

queue-congestion-callout.patch
  Add queue congestion callout

queue-congestion-dm-implementation.patch
  Implement queue congestion callout for device mapper
  devicemapper: use rwlock for map alterations
  Another DM maplock implementation

dm-remove-__dm_request.patch
  dmL remove __dm_request
  per-backing dev unplugging

per-backing_dev-unplugging.patch
  per-backing dev unplugging
  dm plug buglet
  per-backing-dev unplugging: fix BIO_RW_SYNC handling
  per-backing dev unplugging oops fix #42
  fix md for per-address_space unplugging
  more backing_dev unplug functions
  plugged bit

per-backing_dev-unplugging-unplug_delay.patch
  per address_space unplug: tunesup, kill debug code.

correct-unplugs-on-nr_queued.patch
  Correct unplugs on nr_queued
  correct-unplugs-on-nr_queued fix

siimage-update.patch
  ide: update for siimage driver

ipmi-updates-3.patch
  IPMI driver updates

ipmi-acpi-build-fix.patch
  ipmi build fix

ipmi-socket-interface.patch
  IPMI: socket interface

pcmcia-netdev-ordering-fixes.patch
  PCMCIA netdevice ordering issues

3ware-update.patch
  3ware driver update

move-job-control-stuff-tosignal_struct.patch
  move job control fields from task_struct to signal_struct
  s390 fix for move-job-control-stuff-tosignal_struct.patch
  Subject: [PATCH] 2.6.4-mm1 for ia64
  move-job-control-stuff-tosignal_struct-sparc64-fix

move-job-control-stuff-tosignal_struct-ebtables-fix.patch
  move-job-control-stuff-tosignal_struct-ebtables-fix

devinet-ctl_table-fix.patch
  devinet_ctl_table[] null termination

idr-extra-features.patch
  idr.c: extra features enhancements

shm-do_munmap-check.patch

stack-overflow-test-fix.patch
  Fix stack overflow test for non-8k stacks

lower-zone-protection-numa-fix.patch
  Fix page allocator lower zone protection for NUMA

ext3-fsync-speedup.patch
  ext3 fsync() and fdatasync() speedup

ext2-fsync-speedup-2.patch
  speed up ext2 fsync() and fdatasync()

jbd-commit-ordered-fix.patch
  jbd: fix ordered-data writeout logic

jbd-move-locked-buffers.patch
  JBD: ordered-data commit cleanup

jbd-remove-livelock-avoidance.patch
  JBD: remove livelock avoidance code in journal_dirty_data()

jbd-iobuf-error-handling-fix.patch
  jbd: fix I/O error handling

readv-writev-check-fix.patch
  readv/writev range checking fix

kerneldoc-handle-attributes.patch
  Fix scripts/kernel-doc to handle __attribute__

slab-alignment-rework.patch
  slab: updates for per-arch alignments
  slab-alignment-rework merge fix

set-mod-waiter-before-calling-stop_machine.patch
  Set mod->waiter Before Calling stop_machine

procfs-comment-fixes.patch
  fs/proc/proc_tty.c comment fixes

sb_mixer-bounds-checking.patch
  sb_mixer bounds checking

powernow-k8-update.patch
  powernow-k8 update

pmdisk-store-handling-fix.patch
  pmdisk: fix strcmp in sysfs store

file-operations-fcntl.patch
  add file_operations.fcntl

file-operations-fcntl-tidies.patch
  file-operations-fcnt tidies

O_LARGEFILE-fix.patch
  Hide forced O_LARGEFILE from userspace

jgarzik-warnings.patch

sys_time-subtick-correction-fix.patch
  Fix sys_time() to get subtick correction from the new xtime

bitmap_parse-fix.patch
  Broken bitmap_parse for ncpus > 32

ver_linux-fix.patch
  ver_linux fix

codingstyle-fix-for-emacs.patch
  Update CodingStyle hints for Emacs users.

document-unused-i386-pte-bits.patch
  document unused pte bits on i386

docbook-sgml-quotes-fix.patch
  Consistently use quotes for SGML attributes

sgml-close-tags.patch
  SGML: close tag with ">"

sch_ingress-help-fix.patch
  fix sch_ingress help

i386-irq-cleanup.patch
  i386 irq.c ifdef cleanup

firmware-loader-docs-fix.patch
  Fix firmware loader docs

trivial-patches-in-maintainers.patch
  Trivial Patch Monkey should be in MAINTAINERS

genksyms-parser-fix.patch
  Fix genksyms parsing

CONFIG_X86_GENERIC-help-fix.patch
  CONFIG_X86_GENERIC description fixup

credits-update.patch
  updating email info in CREDITS

device-h-duplicate-include.patch
  Kill duplicate #include <linux_ioport.h>

unmapped-CPU-node-number-fix.patch
  Use valid node number when unmapping x86 CPUs

submitting-trivial-patches.patch
  Add CC Trivial Patch Monkey to SubmittingPatches

ne2k-pic-build-fix.patch
  ne2k-pci.c compile fix on ppc[64]

logitech-keyboard-fix.patch
  2.6.5-rc2 keyboard breakage

doc-changes-update.patch
  Update Documentation/Changes

signal-race-fix.patch
  signal handling race fix

signal-race-fix-ia64.patch
  signal-race-fix: ia64

signal-race-fix-s390.patch
  signal-race fixes for s390

signal-race-fix-x86_64.patch
  signal-race-fixes: x86-64 support

signal-race-fixes-ppc.patch
  signal-race fixes for ppc32 and ppc64

BLKPREP_KILL-fix.patch
  Fix BLKPREP_KILL

autofs-dnotify-signal-fix.patch
  dnotify + autofs may create signal/restart syscall loop

bio_pair_end-fix.patch
  catch errors when completing bio pairs

posix-timers-thread.patch
  fix posix-timers to have proper per-process scope

md-merging-fix.patch
  md: merge_bvec_fn needs to know about partitions.

noexec-stack.patch
  Non-Exec stack support

noexec-stack-ia64-fix.patch
  PAGE_COPY_EXEC for ia64

drm-put_user-fixes.patch
  i830 DRM missing put_user

ext3-transaction-batching-fix.patch
  Fix ext3 transaction batching

si_band-is-long.patch
  siginfo.si_band is long

warn-on-mdelay-in-irq-handlers.patch
  Warn on mdelay() in irq handlers

reiserfs-nesting-02.patch
  reiserfs: support for nested transactions

reiserfs-journal-writer.patch
  reiserfs: cleanups

reiserfs-logging.patch
  reiserfs: logging rework

reiserfs-jh-2.patch
  reiserfs: data=ordered support

reiserfs-prealloc.patch
  reiserfs: preallocation support

reiserfs-tail-jh.patch
  reiserfs: tail repacking fix

reiserfs-writepage-ordered-race.patch
  reiserfs: fix race with writepage

reiserfs-file_write_hole_sd.diff.patch
  reiserfs: sparse file handling fix

reiserfs-laptop-mode.patch
  reiserfs: laptop-mode support

reiserfs-truncate-leak.patch
  reiserfs: truncate leak fix

reiserfs-ordered-lat.patch
  reiserfs: scheduling latency improvements

reiserfs-dirty-warning.patch
  reiserfs: fix dirty-buffer warnings

reiserfs_kfree-warning-fix.patch
  reiserfs_kfree warning fix

reiserfs-writepage-race-fix.patch
  reiserfs writepage race with data=ordered

export-complete_all.patch
  export complete_all()

urandom-scalability-fix.patch
  /dev/urandom scalability improvement

load_elf_binary-overflow-detection-fix.patch
  binfmt_elf.c fix for 32-bit apps with large bss

stack-reductions-ide-cd.patch
  stack reduction: ide-cd

stack-reductions-ide.patch
  stack reductions: ide

stack-reductions-isdn.patch
  stack reduction: ISDN

stack-reductions-nfsread.patch
  stack reductions: nfs read

stack-reductions-nfsroot.patch
  stack reductions: nfs root

stack-reductions-sk98lin.patch
  stack reduction: sk98lin

early-param-core.patch
  Add __early_param for all arches

early-param-core-retval-fix.patch
  Support error return for early command line parsing

early-param-i386.patch
  __early_param for i386

early-param-i386-nolapic-fix.patch

early-param-ppc.patch
  __early_param for ppc

early-param-ppc-fixes.patch
  ppc: further early_param fixes

early-param-arm.patch
  __early_param for arm

early-param-alpha.patch
  __early_param for alpha

early-param-arm26.patch
  __early_param for arm26

early-param-cris.patch
  __early_param for cris

early-param-h8300.patch
  __early_param for h8300

early-param-ia64.patch
  __early_param for ia64

early-param-m68k.patch
  __early_param for m68k

early-param-m68knommu.patch
  __early_param for m68knommu

early-param-mips.patch
  __early_param for mips

early-param-parisc.patch
  __early_param for parisc

early-param-ppc64.patch
  __early_param for ppc64

early-param-s390.patch
  __early_param for s390

early-param-sh.patch
  __early_param for SH

early-param-sparc.patch
  __early_param for sparc

early-param-sparc64.patch
  __early_param for sparc64

early-param-um.patch
  __early_param for UM

early-param-v850.patch
  __early_param for v850

early-param-x86_64.patch
  __early_param for x86_64

early-param-x86_64-fix.patch
  Fix x86-64 early command line parsing

probe_roms-01-move-stuff.patch
  i386 probe_roms(): preparation

probe_roms-02-fixes.patch
  i386 probe_roms(): fixes

hugetlb-overcommit-fix.patch
  Fix hugetlb-vs-memory overcommit

remove-__ARCH_SI_BAND_T.patch
  remove __ARCH_SI_BAND_T

8250-resource-management-fix.patch
  Subject: pcmcia/serial release of memory I/O twice

speed-up-sata.patch
  speed up SATA

cpu5wdt-warning-fix.patch
  cpu5wdt.c warning fix

fget-speedup.patch
  speed up fget() and fget_light()

ksoftirqd-barrier.patch
  ksoftirqd: missing barrier

max_map_count-sysctl.patch
  Replace MAX_MAP_COUNT with /proc/sys/vm/max_map_count

move-__this_module-to-modpost.patch
  Move __this_module to modpost

support-zerobased-floppies.patch
  Support for floppies whose sectors are numbered from zero instead of one

loop-bd_setsize-fix.patch
  loop setup calling bd_set_size too soon

yenta-TI-irq-routing-fix.patch
  yenta: interrupt routing for TI briges

earlier-page_address_init.patch
  run page_address_init() earlier

remove-bitmap-length-limits.patch
  Remove bitmap_shift_*() bitmap length limits

pdflush-nice-0.patch
  Make pdflush run at nice 0

O_DIRECT-race-fixes-rollup.patch
  O_DIRECT data exposure fixes

O_DIRECT-ll_rw_block-vs-block_write_full_page-fix.patch
  Fix race between ll_rw_block() and block_write_full_page()

blockdev-direct-io-speedup.patch
  blockdev direct-io speedups

dio-aio-fixes.patch
  direct-io AIO fixes

aio-fallback-bio_count-race-fix-2.patch
  AIO+DIO bio_count race fix
  AIO/direct-io oops fix

rw_swap_page_sync-fix.patch
  rw_swap_page_sync(): placxe the pages in swapcache

radix-tree-tagging.patch
  radix-tree tags for selective lookup

irq-safe-pagecache-lock.patch
  make the pagecache lock irq-safe.

tag-dirty-pages.patch
  tag dirty pages as such in the radix tree

tag-writeback-pages.patch
  tag writeback pages as such in their radix tree

stop-using-dirty-pages.patch
  stop using the address_space dirty_pages list

kupdate-function-fix.patch
  fix the kupdate function

stop-using-io-pages.patch
  remove address_space.io_pages

stop-using-locked-pages.patch
  Stop using address_space.locked_pages
  stop-using-locked-pages fix
  wait_on_page_writeback_range fix

stop-using-clean-pages.patch
  stop using address_space.clean_pages

unslabify-pgds-and-pmds.patch
  revert the slabification of i386 pgd's and pmd's

slab-stop-using-page-list.patch
  slab: stop using page.list

page_alloc-stop-using-page-list.patch
  stop using page.list in the page allocator

hugetlb-stop-using-page-list.patch
  stop using page->list in the hugetlbpage implementations

hugetlb-stop-using-page-list-sh.patch

pageattr-stop-using-page-list.patch
  stop using page.list in pageattr.c

readahead-stop-using-page-list.patch
  stop using page.list in readahead

compound-pages-stop-using-lru.patch
  stop using page->lru in compound pages

arm-stop-using-page-list.patch
  arm: stop using page->list

m68k-stop-using-page-list.patch
  switch the m68k pointer-table code over to page->lru

remove-page-list.patch
  remove page.list

clear_page_dirty_for_io.patch
  fdatasync integrity fix

block_write_full_page-redirty.patch
  don't permit background writes to hide dirty buffers

writeback-search-start.patch
  writeback efficiency and QoS improvements

mpage_writepages-latency-fix.patch
  Add mpage_writepages() scheduling point

kswapd-remove-pages-scanned.patch
  kswapd: remove pages_scanned local

laptop-mode-3.patch
  laptop mode

xfs-sync-fix.patch
  xfs sync fix

vmscan-less-sleepiness.patch
  vmscan: Fix up the determination of when to throttle

tunable-pagefault-readaround.patch
  Honour the readahead tunable in filemap_nopage()

laptop-mode-readahead.patch
  Update laptop-mode documentation to describe readahead usage

filemap_nopage-busywait-fix.patch
  Fix logic in filemap_nopage()

swp_entry-vs-swap_pte-fix.patch
  Fix swp_entry_t encoding

swp_entry-vs-swap_pte-fix-fix.patch

remap-file-pages-prot-2.6.4-rc1-mm1-A1.patch
  per-page protections for remap_file_pages()

remap_file_pages-errno-fix.patch
  remap_file_pages error retun fix

ppc32-pgtable-fixes.patch
  ppc32 pgtable.h fixes for -mm4

remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
  remap_file_pages page-prot implementation for ia64

remap-file-pages-prot-s390.patch
  s390: remap-file-pages-prot support

remap-file-pages-prot-sparc64.patch
  remap-file-pages-prot: sparc64 support

remap-file-pages-prot-ppc64.patch
  remap-file-pages-page-prot ppc64 support

remap-file-pages-prot-ppc64-more.patch

list_del-debug.patch
  list_del debug check

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch
  lockmeter
  ia64 CONFIG_LOCKMETER fix

ia32-4k-stacks.patch
  ia32: 4Kb stacks (and irqstacks) patch

ia32-4k-stacks-remove-44-dependency.patch

4k-stacks-4g4g-interaction-fix.patch
  fix interaction between 4k stacks and 4g:4g

ia32-4k-stacks-build-fix.patch
  4k stacks build fix

4k-stacks-in-modversions-magic.patch
  Add 4k stacks to module version magic

4k-stacks-always-on.patch
  Permanently enable 4k stacks on ia32

reslabify-pgds-and-pmds-2.patch

4g-2.6.0-test2-mm2-A5.patch
  4G/4G split patch
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g/4g usercopy atomicity fix
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g/4g usercopy atomicity fix
  4G/4G preempt on vstack
  4G/4G: even number of kmap types
  4g4g: fix __get_user in slab
  4g4g: Remove extra .data.idt section definition
  4g/4g linker error (overlapping sections)
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g4g: show_registers() fix
  4g/4g usercopy atomicity fix
  4g4g: debug flags fix
  4g4g: Fix wrong asm-offsets entry
  cyclone time fixmap fix
  4G/4G preempt on vstack
  4G/4G: even number of kmap types
  4g4g: fix __get_user in slab
  4g4g: Remove extra .data.idt section definition
  4g/4g linker error (overlapping sections)
  4G/4G: remove debug code
  4g4g: pmd fix
  4g/4g: fixes from Bill
  4g4g: fpu emulation fix
  4g4g: show_registers() fix
  4g/4g usercopy atomicity fix
  4g4g: debug flags fix
  4g4g: Fix wrong asm-offsets entry
  cyclone time fixmap fix
  use direct_copy_{to,from}_user for kernel access in mm/usercopy.c
  4G/4G might_sleep warning fix
  4g/4g pagetable accounting fix
  Fix 4G/4G and WP test lockup
  4G/4G KERNEL_DS usercopy again
  Fix 4G/4G X11/vm86 oops
  Fix 4G/4G athlon triplefault
  4g4g SEP fix
  Fix 4G/4G split fix for pre-pentiumII machines
  4g/4g PAE ACPI low mappings fix
  zap_low_mappings() cannot be __init
  4g/4g: remove printk at boot
  4g4g: fix handle_BUG()
  4g4g: acpi sleep fixes

4g4g-sched-warning-fix.patch
  sched.c warning fixes

4g4g-restore-4k-stacks-stuff.patch
  4g4g: make it play with 4k stacks

4g4g-locked-userspace-copy.patch
  Do a locked user-space copy for 4g/4g

4g4g-variable-stack-size.patch
  Fix 4G/4G w/ 8k+ stacks

early-identify-cpu.patch
  early CPU identification

RE: 2.6.5-rc3-mm1

[Sid Boyce]

[-- Attachment #1: Type: text/plain, Size: 304 bytes --]

It builds fine on x86_64 but locks up solid at ----
found reiserfs format "3.6" with standard journal
Hard disk light permanently on - 2.6.5-rc2 vanilla is the last one to 
boot fully, haven't tried 2.6.5-rc3 vanilla yet.
Regards
Sid.


-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.


[-- Attachment #2: 265rc3mm1.config --]
[-- Type: text/plain, Size: 33050 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
# CONFIG_STANDALONE is not set
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=m
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_YENTA=m
CONFIG_CARDBUS=y
CONFIG_I82092=m
CONFIG_TCIC=m

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_FW_LOADER=m
CONFIG_DEBUG_DRIVER=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=128000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
# CONFIG_IPMI_SOCKET is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=m
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_DELAY=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
CONFIG_E100_NAPI=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=2
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_SIS190 is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y

#
# Token Ring devices
#
# CONFIG_TR is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=y

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m

#
# Amateur Radio support
#
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m

#
# IrDA (infrared) support
#
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_VLSI_FIR=m

#
# Bluetooth support
#
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDDLER=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_HP8200e is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_G_SERIAL=m

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_CHECKING is not set
CONFIG_INIT_DEBUG=y
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_LEAK=y
# CONFIG_KGDB is not set

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m

Re: 2.6.5-rc3-mm1

[Sid Boyce]

Chris Mason wrote:

>On Tue, 2004-03-30 at 15:44, Sid Boyce wrote:
>  
>
>>It builds fine on x86_64 but locks up solid at ----
>>found reiserfs format "3.6" with standard journal
>>Hard disk light permanently on - 2.6.5-rc2 vanilla is the last one to 
>>boot fully, haven't tried 2.6.5-rc3 vanilla yet.
>>    
>>
>
>Have you tried booting with acpi=off?
>
>-chris
>
>
>
>  
>
With acpi=off, I get a string of messages
atkbd.c: Unknown key released (translated to set 0, code 0x41 on 
isa0060/serio0)
atkbd.c: Use 'setkeycodes 41 <keycode>' to make it known
Then it freezes with HD light solid on.
Before the messages above ---
********* Please consider a BIOS update.
********* Disabling USB legacy in the BIOS may also help.
Disabled USB legacy in the BIOS, with acpi=off it's back to the original 
freeze after the found reiserfs message.

I shall check to see if there is a later BIOS available.
Acer 1501LCe laptop, Athlon64 3000+, CD-RW/DVD, fireiwre port,  no 
floppy, no serial ports.
Regards
Sid.

-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

Re: 2.6.5-rc3-mm1

[Chris Mason]

On Tue, 2004-03-30 at 16:57, Sid Boyce wrote:
> Chris Mason wrote:
> 
> >On Tue, 2004-03-30 at 15:44, Sid Boyce wrote:
> >  
> >
> >>It builds fine on x86_64 but locks up solid at ----
> >>found reiserfs format "3.6" with standard journal
> >>Hard disk light permanently on - 2.6.5-rc2 vanilla is the last one to 
> >>boot fully, haven't tried 2.6.5-rc3 vanilla yet.
> >>    
> >>
> >
> >Have you tried booting with acpi=off?
> >
> With acpi=off, I get a string of messages

Try pci=noacpi

-chris

Re: 2.6.5-rc3-mm1

[Sid Boyce]

Chris Mason wrote:

>On Tue, 2004-03-30 at 16:57, Sid Boyce wrote:
>  
>
>>Chris Mason wrote:
>>
>>    
>>
>>>On Tue, 2004-03-30 at 15:44, Sid Boyce wrote:
>>> 
>>>
>>>      
>>>
>>>>It builds fine on x86_64 but locks up solid at ----
>>>>found reiserfs format "3.6" with standard journal
>>>>Hard disk light permanently on - 2.6.5-rc2 vanilla is the last one to 
>>>>boot fully, haven't tried 2.6.5-rc3 vanilla yet.
>>>>   
>>>>
>>>>        
>>>>
>>>Have you tried booting with acpi=off?
>>>
>>>      
>>>
>>With acpi=off, I get a string of messages
>>    
>>
>
>Try pci=noacpi
>
>-chris
>
>
>
>  
>
Same result, locks up in the same place, I'm going to build 2.6.5-rc3 
vanilla now.
Regards
Sid.

-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

Re: 2.6.5-rc3-mm1

[Jason Munro]

On 4:04:28 pm 03/30/04 Chris Mason <mason@suse.com> wrote:
> On Tue, 2004-03-30 at 16:57, Sid Boyce wrote:
> >  Chris Mason wrote:
> >
> > > On Tue, 2004-03-30 at 15:44, Sid Boyce wrote:
> > >
> > >
> > >> It builds fine on x86_64 but locks up solid at ----
> > >> found reiserfs format "3.6" with standard journal
> > >> Hard disk light permanently on - 2.6.5-rc2 vanilla is the last
> > >> one to boot fully, haven't tried 2.6.5-rc3 vanilla yet.
> > >>
> > >>
> > >
> > > Have you tried booting with acpi=off?
> > >
> >  With acpi=off, I get a string of messages
>
> Try pci=noacpi

Having a similar problem here with 2.6.5-rc3-mm1, boot stops with:

Unable to load interpreter
No init found

passing pci=noacpi or init=/bin/bash makes not difference. The hard drive
light is off and the system still responds to keyboard events, but cannot
continue. This is on a Toshiba laptop, updating from a working 2.6.4-mm1.
Bios is updated to the latest version. I am also running reisers on the
root partition if that matters.

\__ Jason Munro
 \__ jason@stdbev.com
  \__ http://hastymail.sourceforge.net/

Re: 2.6.5-rc3-mm1

[Sid Boyce]

Sid Boyce wrote:

> Chris Mason wrote:
>
>> On Tue, 2004-03-30 at 16:57, Sid Boyce wrote:
>>  
>>
>>> Chris Mason wrote:
>>>
>>>   
>>>
>>>> On Tue, 2004-03-30 at 15:44, Sid Boyce wrote:
>>>>
>>>>
>>>>     
>>>>
>>>>> It builds fine on x86_64 but locks up solid at ----
>>>>> found reiserfs format "3.6" with standard journal
>>>>> Hard disk light permanently on - 2.6.5-rc2 vanilla is the last one 
>>>>> to boot fully, haven't tried 2.6.5-rc3 vanilla yet.
>>>>>  
>>>>>       
>>>>
>>>> Have you tried booting with acpi=off?
>>>>
>>>>     
>>>
>>> With acpi=off, I get a string of messages
>>>   
>>
>>
>> Try pci=noacpi
>>
>> -chris
>>
>>
>>
>>  
>>
> Same result, locks up in the same place, I'm going to build 2.6.5-rc3 
> vanilla now.
> Regards
> Sid.
>
2.6.5-rc2 booting OK(with acpi), anything else 2.6.5-rc2-mm?,  2.6.5-rc3 
or2.6.5-rc3-mm1 freezes.
Regards
Sid.

-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

Re: 2.6.5-rc3-mm1

[Greg KH]

On Tue, Mar 30, 2004 at 02:34:37AM -0800, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5-rc3/2.6.5-rc3-mm1/
> 
> - Dropped the tty locking fix.  As predicted, it deadlocked.  I also
>   reverted the patch from bk-driver-core.patch which is causing this race to
>   trigger more frequently.

Argh, so the only way I'm going to be able to get my little, tiny,
simple vc class patch is by fixing all of the tty layer locking code?

Ugh, that's so mean...  :)

greg k-h

Re: 2.6.5-rc3-mm1

[Andrew Morton]

Greg KH <greg@kroah.com> wrote:
>
> On Tue, Mar 30, 2004 at 02:34:37AM -0800, Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5-rc3/2.6.5-rc3-mm1/
> > 
> > - Dropped the tty locking fix.  As predicted, it deadlocked.  I also
> >   reverted the patch from bk-driver-core.patch which is causing this race to
> >   trigger more frequently.
> 
> Argh, so the only way I'm going to be able to get my little, tiny,
> simple vc class patch is by fixing all of the tty layer locking code?

Well the good news is that my test box now oopses on about 2-out-of-3 boot
attempts.  But that gets tiresome.

> Ugh, that's so mean...  :)

Optimistic, too.

I'm thinking that this can be fixed from the other direction: just before
release_dev() calls close (dropping BKL), if tty->count==1, make the
going-away tty ineligible for concurrent lookups.  Do that by setting
tty->driver->ttys[idx] to NULL.  Maybe.

Re: 2.6.5-rc3-mm1

[Andrew Morton]

Andrew Morton <akpm@osdl.org> wrote:
>
> I'm thinking that this can be fixed from the other direction: just before
>  release_dev() calls close (dropping BKL), if tty->count==1, make the
>  going-away tty ineligible for concurrent lookups.  Do that by setting
>  tty->driver->ttys[idx] to NULL.  Maybe.

Famous last word: Volia!


diff -puN drivers/char/tty_io.c~tty-race-fix-42 drivers/char/tty_io.c
--- 25/drivers/char/tty_io.c~tty-race-fix-42	Tue Mar 30 16:30:55 2004
+++ 25-akpm/drivers/char/tty_io.c	Tue Mar 30 16:35:21 2004
@@ -1142,6 +1142,17 @@ static void release_dev(struct file * fi
 	}
 #endif
 
+	/*
+	 * ->close can sleep, and drop the BKL.  If this tty is about to
+	 * be destroyed we need to prevent other threads from coming in and
+	 * grabbing a new ref against the about-to-die tty.  Those threads
+	 * perform the lookup via tty->driver->ttys[], in init_dev().
+	 */
+	if (tty->count == 1) {
+		if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM))
+			tty->driver->ttys[idx] = NULL;
+	}
+
 	if (tty->driver->close)
 		tty->driver->close(tty, filp);
 

Re: 2.6.5-rc3-mm1

[Paul Blazejowski]

[-- Attachment #1.1: Type: text/plain, Size: 20525 bytes --]

Hello Andrew,

This shows up on NForce2 board.

Linux version 2.6.5-rc3-mm1 (root@blaze) (gcc version 3.3.3) #1 Tue Mar
30 14:40:20 EST 2004

from dmesg:

ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
mapped 4G/4G trampoline to fffeb000.
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=Slackware_2.6 ro root=801
rootflags=quota video=vesafb:ywrap,mtrr
CPU 0 irqstacks, hard=02443000 soft=02442000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2205.498 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 1035716k/1048512k available (2316k kernel code, 12052k reserved,
810k data, 180k init, 0k highmem)
Calibrating delay loop... 4358.14 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 78k freed
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2204.0623 MHz.
..... host bus clock speed is 400.0840 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaee0, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1
Active:0)
00:00:01[A] -> 2-23 -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1
Active:0)
00:00:02[A] -> 2-20 -> IRQ 20
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1
Active:0)
00:00:02[B] -> 2-22 -> IRQ 22
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1
Active:0)
00:00:02[C] -> 2-21 -> IRQ 21
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1
Active:0)
00:01:06[A] -> 2-18 -> IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1
Active:0)
00:01:06[B] -> 2-19 -> IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1
Active:0)
00:01:06[C] -> 2-16 -> IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1
Active:0)
00:01:06[D] -> 2-17 -> IRQ 17
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 000 00  1    0    0   0   0    0    0    00
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  1    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   0   0    1    1    D9
 11 001 01  1    1    0   0   0    1    1    E1
 12 001 01  1    1    0   0   0    1    1    C9
 13 001 01  1    1    0   0   0    1    1    D1
 14 001 01  1    1    0   0   0    1    1    B1
 15 001 01  1    1    0   0   0    1    1    C1
 16 001 01  1    1    0   0   0    1    1    B9
 17 001 01  1    1    0   0   0    1    1    A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
vesafb: framebuffer at 0xc0000000, mapped to 0x42808000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:581c
vesafb: pmi: set display start = 020c58b0, set palette = 020c58fc
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2
c0b4
vesafb: scrolling: ywrap using protected mode interface,
yres_virtual=8192
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SGI XFS with ACLs, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768,
80505 bytes, v2).
Console: switching to colour frame buffer device 105x34
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: WDC WD300BB-00AUA1, ATA DISK drive
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
        current capacity is 58631231 sectors (30019 MB)
        native  capacity is 58633344 sectors (30020 MB)
hda: 58631231 sectors (30019 MB) w/2048KiB Cache, CHS=58165/16/63
 hda: hda1
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra2 SCSI adapter>
        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
 
(scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
  Vendor: PLEXTOR   Model: CD-ROM PX-40TW    Rev: 1.05
  Type:   CD-ROM                             ANSI SCSI revision: 02
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
  Vendor: PLEXTOR   Model: CD-R   PX-W1210S  Rev: 1.06
  Type:   CD-ROM                             ANSI SCSI revision: 02
(scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
  Vendor: IBM       Model: DDYS-T36950N      Rev: S80D
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled.  Depth 32
libata version 1.02 loaded.
Found Controller: IT8212 UDMA/ATA133 RAID Controller
Device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
  Vendor: ITE       Model: IT8212F           Rev: 1.3
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
 sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.13 2004-Mar-09, 3 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
RAMDISK: Couldn't find valid RAM disk image starting at 0.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 180k freed
Adding 248968k swap on /dev/sda7.  Priority:-1 extents:1
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
Supermount version 2.0.4 for kernel 2.6
Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k2
Copyright (c) 1999-2004 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
MMIO=[e6084000-e60847ff]  Max Packet=[2048]
amd74xx: no version for "cleanup_module" found: kernel tainted.
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
NFORCE2: port 0x01f0 already claimed by ide0
NFORCE2: port 0x0170 already claimed by ide1
NFORCE2: neither IDE port enabled (BIOS)
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49394 usecs
intel8x0: clocking to 47419
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 21, pci mem 438cd000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 20, pci mem 438fd000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 22, pci mem 438ff000
Badness in get_phy_reg at drivers/ieee1394/ohci1394.c:238
Call Trace:
 [<4381310e>] get_phy_reg+0x10e/0x120 [ohci1394]
 [<43813f3c>] ohci_devctl+0x5c/0x5d0 [ohci1394]
 [<02114a54>] delay_pmtmr+0x14/0x20
 [<43816058>] ohci_irq_handler+0x588/0x830 [ohci1394]
 [<0212827f>] do_timer+0xdf/0xf0
 [<0210ac2a>] handle_IRQ_event+0x3a/0x70
 [<0210b005>] do_IRQ+0xd5/0x1b0
 =======================
 [<43813193>] set_phy_reg+0x73/0x120 [ohci1394]
 [<022d2c67>] hcd_submit_urb+0x137/0x160
 [<438d1d40>] delayed_reset_bus+0x0/0xd0 [ieee1394]
 [<43813f56>] ohci_devctl+0x76/0x5d0 [ohci1394]
 [<438da3b7>] csr1212_fill_cache+0x97/0x100 [ieee1394]
 [<438d1d40>] delayed_reset_bus+0x0/0xd0 [ieee1394]
 [<438cf1a5>] hpsb_reset_bus+0x35/0x40 [ieee1394]
 [<438d1df4>] delayed_reset_bus+0xb4/0xd0 [ieee1394]
 [<02128094>] run_timer_softirq+0xd4/0x1d0
 [<02130563>] rcu_process_callbacks+0x83/0x100
 [<02123dbd>] __do_softirq+0x7d/0x80
 [<0210b92e>] do_softirq+0x4e/0x60
 =======================
 [<0210b08b>] do_IRQ+0x15b/0x1b0
 
Badness in set_phy_reg at drivers/ieee1394/ohci1394.c:267
Call Trace:
 [<43813230>] set_phy_reg+0x110/0x120 [ohci1394]
 [<43813f56>] ohci_devctl+0x76/0x5d0 [ohci1394]
 [<02114a54>] delay_pmtmr+0x14/0x20
 [<43816058>] ohci_irq_handler+0x588/0x830 [ohci1394]
 [<0212827f>] do_timer+0xdf/0xf0
 [<0210ac2a>] handle_IRQ_event+0x3a/0x70
 [<0210b005>] do_IRQ+0xd5/0x1b0
 =======================
 [<43813193>] set_phy_reg+0x73/0x120 [ohci1394]
 [<022d2c67>] hcd_submit_urb+0x137/0x160
 [<438d1d40>] delayed_reset_bus+0x0/0xd0 [ieee1394]
 [<43813f56>] ohci_devctl+0x76/0x5d0 [ohci1394]
 [<438da3b7>] csr1212_fill_cache+0x97/0x100 [ieee1394]
 [<438d1d40>] delayed_reset_bus+0x0/0xd0 [ieee1394]
 [<438cf1a5>] hpsb_reset_bus+0x35/0x40 [ieee1394]
 [<438d1df4>] delayed_reset_bus+0xb4/0xd0 [ieee1394]
 [<02128094>] run_timer_softirq+0xd4/0x1d0
 [<02130563>] rcu_process_callbacks+0x83/0x100
 [<02123dbd>] __do_softirq+0x7d/0x80
 [<0210b92e>] do_softirq+0x4e/0x60
 =======================
 [<0210b08b>] do_IRQ+0x15b/0x1b0
 
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xb0000000
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[8a1cc7ffff0020ed]
ip1394: $Rev: 1175 $ Ben Collins <bcollins@debian.org>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 2-1: new full speed USB device using address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 2-2: new low speed USB device using address 3
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM)] on usb-0000:00:02.0-2
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 2-1.1: new low speed USB device using address 4
input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on
usb-0000:00:02.0-1.1
input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on
usb-0000:00:02.0-1.1
usb 3-1: new full speed USB device using address 2
nfs warning: mount version older than kernel
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Real Time Clock Driver v1.12
eth0: no IPv6 routers present
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 930 MBytes.
[fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
[fglrx] AGP detected, AgpState   = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[fglrx] free  AGP = 256126976
[fglrx] max   AGP = 256126976
[fglrx] free  LFB = 116391936
[fglrx] max   LFB = 116391936
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 65536
inserting floppy driver for 2.6.5-rc3-mm1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
sr: unaligned transfer
FAT: unable to read boot sector
ide-floppy driver 0.99.newide
hdc: No disk in drive

Attached is /proc/config.gz

Thanks,

Paul B.

[-- Attachment #1.2: config.gz --]
[-- Type: application/x-gzip, Size: 8068 bytes --]

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.6.5-rc3-mm1

[Russell King]

On Tue, Mar 30, 2004 at 06:26:27PM -0800, Andrew Morton wrote:
> Andrew Morton <akpm@osdl.org> wrote:
> >
> > I'm thinking that this can be fixed from the other direction: just before
> >  release_dev() calls close (dropping BKL), if tty->count==1, make the
> >  going-away tty ineligible for concurrent lookups.  Do that by setting
> >  tty->driver->ttys[idx] to NULL.  Maybe.
> 
> Famous last word: Volia!

I suspect you may just be able to get away with this for serial drivers
using serial_core.  However, I suspect it'll break non-serial_core using
serial drivers.

The serial drivers track the tty count themselves, so that they know
when to do the final close processing (why you may ask - because of
the blocking for DCD in the open code.)  I wouldn't like to say what
would happen if ->open were called for a different tty structure for
the same port while ->close was in progress.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core

Re: 2.6.5-rc3-mm1

[Andi Kleen]

Sid Boyce <sboyce@blueyonder.co.uk> writes:

> Before the messages above ---
> ********* Please consider a BIOS update.
> ********* Disabling USB legacy in the BIOS may also help.

You should really update your BIOS. With this BIOS bug you can 
get basically random crashes on 64bit systems. The kernel tries
to work around them in the idle loop, but they can happen elsewhere
too.

-Andi

Re: 2.6.5-rc3-mm1

[Andi Kleen]

Sid Boyce <sboyce@blueyonder.co.uk> writes:
>>
> 2.6.5-rc2 booting OK(with acpi), anything else 2.6.5-rc2-mm?,
> 2.6.5-rc3 or2.6.5-rc3-mm1 freezes.

Could you perhaps build your kernel with netconsole and builtin
network driver (see Documentation/networking/netconsole.txt) and get
a full boot log?  You can send it to me privately.

-Andi

Re: 2.6.5-rc3-mm1

[Danny ter Haar]

Andi Kleen  <ak@muc.de> wrote:
>> 2.6.5-rc2 booting OK(with acpi), anything else 2.6.5-rc2-mm?,
>> 2.6.5-rc3 or2.6.5-rc3-mm1 freezes.
>Could you perhaps build your kernel with netconsole and builtin
>network driver (see Documentation/networking/netconsole.txt) and get
>a full boot log?  You can send it to me privately.

Compaq presario 700 laptop:
2.6.5-rc3-mm1 gives timeout on /dev/hda while booting.
2.6.5-rc2-mm3 works fine.

Danny

-- 
 /"\                        | Dying is to be avoided because
 \ /  ASCII RIBBON CAMPAIGN | it can ruin your whole career 
  X   against HTML MAIL     | 
 / \  and POSTINGS          | - Bob Hope

Re: 2.6.5-rc3-mm1

[Andrew Morton]

Russell King <rmk+lkml@arm.linux.org.uk> wrote:
>
> On Tue, Mar 30, 2004 at 06:26:27PM -0800, Andrew Morton wrote:
> > Andrew Morton <akpm@osdl.org> wrote:
> > >
> > > I'm thinking that this can be fixed from the other direction: just before
> > >  release_dev() calls close (dropping BKL), if tty->count==1, make the
> > >  going-away tty ineligible for concurrent lookups.  Do that by setting
> > >  tty->driver->ttys[idx] to NULL.  Maybe.
> > 
> > Famous last word: Volia!
> 
> I suspect you may just be able to get away with this for serial drivers
> using serial_core.  However, I suspect it'll break non-serial_core using
> serial drivers.
> 
> The serial drivers track the tty count themselves, so that they know
> when to do the final close processing (why you may ask - because of
> the blocking for DCD in the open code.)  I wouldn't like to say what
> would happen if ->open were called for a different tty structure for
> the same port while ->close was in progress.

You cannot defeat me that easily!

Actually the race+oops _was_ fixed in Linus's tree a week ago, sort-of.  If
the race happens we end up running vcs_devfs_add() and vcs_devfs_remove()
against the tty concurrently, leaving it in indeterminate state.  This will
cause devfs warnings and missing devfs/sysfs stuff, but no oops.

The con_open-speedup.patch in -mm reintroduces the oops by not bogusly
overwriting tty->driver_data when tty->count > 1.  Fun.

This rather nasty patch fixes things up again.


 25-akpm/drivers/char/tty_io.c |    2 +-
 25-akpm/drivers/char/vt.c     |   14 ++++++++++++++
 25-akpm/include/linux/tty.h   |    3 +++
 3 files changed, 18 insertions(+), 1 deletion(-)

diff -puN drivers/char/vt.c~tty-race-fix-43 drivers/char/vt.c
--- 25/drivers/char/vt.c~tty-race-fix-43	2004-03-31 00:44:54.582831728 -0800
+++ 25-akpm/drivers/char/vt.c	2004-03-31 00:44:54.589830664 -0800
@@ -2480,8 +2480,16 @@ static int con_open(struct tty_struct *t
 	return ret;
 }
 
+/*
+ * We take tty_sem in here to prevent another thread from coming in via init_dev
+ * and taking a ref against the tty while we're in the process of forgetting
+ * about it and cleaning things up.
+ *
+ * This is because vcs_remove_devfs() can sleep and will drop the BKL.
+ */
 static void con_close(struct tty_struct *tty, struct file *filp)
 {
+	down(&tty_sem);
 	acquire_console_sem();
 	if (tty && tty->count == 1) {
 		struct vt_struct *vt;
@@ -2492,9 +2500,15 @@ static void con_close(struct tty_struct 
 		tty->driver_data = 0;
 		release_console_sem();
 		vcs_remove_devfs(tty);
+		up(&tty_sem);
+		/*
+		 * tty_sem is released, but we still hold BKL, so there is
+		 * still exclusion against init_dev()
+		 */
 		return;
 	}
 	release_console_sem();
+	up(&tty_sem);
 }
 
 static void vc_init(unsigned int currcons, unsigned int rows,
diff -puN drivers/char/tty_io.c~tty-race-fix-43 drivers/char/tty_io.c
--- 25/drivers/char/tty_io.c~tty-race-fix-43	2004-03-31 00:44:54.584831424 -0800
+++ 25-akpm/drivers/char/tty_io.c	2004-03-31 00:44:54.591830360 -0800
@@ -123,7 +123,7 @@ LIST_HEAD(tty_drivers);			/* linked list
 struct tty_ldisc ldiscs[NR_LDISCS];	/* line disc dispatch table	*/
 
 /* Semaphore to protect creating and releasing a tty */
-static DECLARE_MUTEX(tty_sem);
+DECLARE_MUTEX(tty_sem);
 
 #ifdef CONFIG_UNIX98_PTYS
 extern struct tty_driver *ptm_driver;	/* Unix98 pty masters; for /dev/ptmx */
diff -puN include/linux/tty.h~tty-race-fix-43 include/linux/tty.h
--- 25/include/linux/tty.h~tty-race-fix-43	2004-03-31 00:44:54.586831120 -0800
+++ 25-akpm/include/linux/tty.h	2004-03-31 00:44:54.592830208 -0800
@@ -363,6 +363,9 @@ extern void tty_flip_buffer_push(struct 
 extern int tty_get_baud_rate(struct tty_struct *tty);
 extern int tty_termios_baud_rate(struct termios *termios);
 
+struct semaphore;
+extern struct semaphore tty_sem;
+
 /* n_tty.c */
 extern struct tty_ldisc tty_ldisc_N_TTY;
 

_

Re: 2.6.5-rc3-mm1

[Sid Boyce]

Andi Kleen wrote:

>Sid Boyce <sboyce@blueyonder.co.uk> writes:
>
>  
>
>>Before the messages above ---
>>********* Please consider a BIOS update.
>>********* Disabling USB legacy in the BIOS may also help.
>>    
>>
>
>You should really update your BIOS. With this BIOS bug you can 
>get basically random crashes on 64bit systems. The kernel tries
>to work around them in the idle loop, but they can happen elsewhere
>too.
>
>-Andi
>
>
>
>  
>
I've checked the Acer site and there's no mention of a BIOS for the 
1501LCe in the upgrades section. I guess their Phoenix 4.0 Release 6.0 
is the only one to date.
Regards
Sid.

-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

Re: 2.6.5-rc3-mm1

[Sid Boyce]

Andi Kleen wrote:

>Sid Boyce <sboyce@blueyonder.co.uk> writes:
>  
>
>>2.6.5-rc2 booting OK(with acpi), anything else 2.6.5-rc2-mm?,
>>2.6.5-rc3 or2.6.5-rc3-mm1 freezes.
>>    
>>
>
>Could you perhaps build your kernel with netconsole and builtin
>network driver (see Documentation/networking/netconsole.txt) and get
>a full boot log?  You can send it to me privately.
>
>-Andi
>
>
>
>  
>
The laptop does not have a serial console and it does not get as far as 
networking during boot.
Regards
Sid.

-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.