Re: [PATCH v11 18/23] PCI/AER: Dequeue forwarded CXL error

[Dave Jiang <dave.jiang@intel.com>]

On 9/11/25 7:33 AM, Bowman, Terry wrote:
> 
> 
> On 8/28/2025 7:43 PM, Dave Jiang wrote:
>>
>> On 8/26/25 6:35 PM, Terry Bowman wrote:
>>> The AER driver is now designed to forward CXL protocol errors to the CXL
>> I would rephrase it to:
>> The AER driver enqueues the CXL protocol error info to the created kfifo for the CXL driver to consume.
>>  
>>> driver. Update the CXL driver with functionality to dequeue the forwarded
>>> CXL error from the kfifo. Also, update the CXL driver to begin the protocol
>>> error handling processing using the work received from the FIFO.
>>>
>>> Update function cxl_proto_err_work_fn() to dequeue work forwarded by the
>>> AER service driver. This will begin the CXL protocol error processing with
>>> a call to cxl_handle_proto_error().
>>>
>>> Introduce logic to take the SBDF values from 'struct cxl_proto_error_info'
>>> and use in discovering the erring PCI device. The call to pci_get_domain_bus_and_slot()
>>> will return a reference counted 'struct pci_dev *'. This will serve as
>>> reference count to prevent releasing the CXL Endpoint's mapped RAS while
>>> handling the error. Use scope base __free() to put the reference count.
>>> This will change when adding support for CXL port devices in the future.
>>>
>>> Implement cxl_handle_proto_error() to differentiate between Restricted CXL
>>> Host (RCH) protocol errors and CXL virtual host (VH) protocol errors.
>>> Maintain the existing RCH handling. Export the AER driver's pcie_walk_rcec()
>>> allowing the CXL driver to walk the RCEC's secondary bus.
>>>
>>> VH correctable error (CE) processing will call the CXL CE handler. VH
>>> uncorrectable errors (UCE) will call cxl_do_recovery(), implemented as a
>>> stub for now and to be updated in future patch. Export pci_aer_clean_fatal_status()
>>> and pci_clean_device_status() used to clean up AER status after handling.
>>>
>>> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
>>> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>>
>>> ---
>>> Changes in v10->v11:
>>> - Reword patch commit message to remove RCiEP details (Jonathan)
>>> - Add #include <linux/bitfield.h> (Terry)
>>> - is_cxl_rcd() - Fix short comment message wrap  (Jonathan)
>>> - is_cxl_rcd() - Combine return calls into 1  (Jonathan)
>>> - cxl_handle_proto_error() - Move comment earlier  (Jonathan)
>>> - Usse FIELD_GET() in discovering class code (Jonathan)
>>> - Remove BDF from cxl_proto_err_work_data. Use 'struct pci_dev *' (Dan)
>>> ---
>>>  drivers/cxl/core/ras.c  | 68 ++++++++++++++++++++++++++++++++++-------
>>>  drivers/pci/pci.c       |  1 +
>>>  drivers/pci/pci.h       |  7 -----
>>>  drivers/pci/pcie/aer.c  |  1 +
>>>  drivers/pci/pcie/rcec.c |  1 +
>>>  include/linux/aer.h     |  2 ++
>>>  include/linux/pci.h     | 10 ++++++
>>>  7 files changed, 72 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
>>> index b285448c2d9c..a2e95c49f965 100644
>>> --- a/drivers/cxl/core/ras.c
>>> +++ b/drivers/cxl/core/ras.c
>>> @@ -118,17 +118,6 @@ static void cxl_cper_prot_err_work_fn(struct work_struct *work)
>>>  }
>>>  static DECLARE_WORK(cxl_cper_prot_err_work, cxl_cper_prot_err_work_fn);
>>>  
>>> -int cxl_ras_init(void)
>>> -{
>>> -	return cxl_cper_register_prot_err_work(&cxl_cper_prot_err_work);
>>> -}
>>> -
>>> -void cxl_ras_exit(void)
>>> -{
>>> -	cxl_cper_unregister_prot_err_work(&cxl_cper_prot_err_work);
>>> -	cancel_work_sync(&cxl_cper_prot_err_work);
>>> -}
>>> -
>>>  static pci_ers_result_t cxl_handle_ras(struct device *dev, u64 serial, void __iomem *ras_base);
>>>  static void cxl_handle_cor_ras(struct device *dev, u64 serial, void __iomem *ras_base);
>>>  
>>> @@ -331,6 +320,10 @@ void cxl_endpoint_port_init_ras(struct cxl_port *ep)
>>>  }
>>>  EXPORT_SYMBOL_NS_GPL(cxl_endpoint_port_init_ras, "CXL");
>>>  
>>> +static void cxl_do_recovery(struct device *dev)
>>> +{
>>> +}
>>> +
>>>  static void cxl_handle_cor_ras(struct device *dev, u64 serial, void __iomem *ras_base)
>>>  {
>>>  	void __iomem *addr;
>>> @@ -472,3 +465,56 @@ pci_ers_result_t pci_error_detected(struct pci_dev *pdev,
>>>  	return rc;
>>>  }
>>>  EXPORT_SYMBOL_NS_GPL(pci_error_detected, "CXL");
>>> +
>>> +static void cxl_handle_proto_error(struct cxl_proto_err_work_data *err_info)
>>> +{
>>> +	struct pci_dev *pdev = err_info->pdev;
>>> +	struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
>> So this function is called from the workqueue thread to consume data from the kfifo right? Do we need to take the device lock of the pdev to ensure that a driver is bound to the device before we attempt to retrieve the data? And do we also need to verify that the driver bound is the cxl_pci driver (and not something like vfio_pci)? Otherwise I think assuming the drv data is cxl_dev_state may cause crash.
>>
>> DJ
> 
> Yes, this is called in the worker thread context. I added the pdev device locks
> later in cxl_report_error_detected() for the UCE case. I found it necessary to 
> put in this function and not in cxl_handle_proto_error() (here) because of the 
> traversing logic in the UCE handling flow where it needs to be locked but only
> exactly once. I didn't add for the CE because I wasn't certain a CE error was 
> enough reason to add a device lock. 
> 
> The UCE flow is:
> 
> cxl_handle_proto_error()
> --> cxl_do_recovery()
> ----> cxl_handle_proto_error() <--- Added device lock here because of topo traversing/iteration
> 
> 
> I tried adding a function checking for cxl_pci driver but ran into circular dependency 
> because the driver is defined in cxl_pci but called from cxl_core. I will revisit
> this again but need some ideas how to make that work as I expect it will require 
> some code moving. 

Is there a chance that the endpoint errors can just be handled via the standard AER flow via AER callback? Otherwise we may need to move the cxl_pci driver definition to core/pci.c in order to do this....

DJ

> 
> Terry
> 
>>> +	struct cxl_memdev *cxlmd = cxlds->cxlmd;
>>> +	struct device *host_dev __free(put_device) = get_device(&cxlmd->dev);
>>> +> +	if (err_info->severity == AER_CORRECTABLE) {
>>> +		int aer = pdev->aer_cap;
>>> +
>>> +		if (aer)
>>> +			pci_clear_and_set_config_dword(pdev,
>>> +						       aer + PCI_ERR_COR_STATUS,
>>> +						       0, PCI_ERR_COR_INTERNAL);
>>> +
>>> +		cxl_cor_error_detected(&cxlmd->dev);
>>> +
>>> +		pcie_clear_device_status(pdev);
>>> +	} else {
>>> +		cxl_do_recovery(&cxlmd->dev);
>>> +	}
>>> +}
>>> +
>>> +static void cxl_proto_err_work_fn(struct work_struct *work)
>>> +{
>>> +	struct cxl_proto_err_work_data wd;
>>> +
>>> +	while (cxl_proto_err_kfifo_get(&wd))
>>> +		cxl_handle_proto_error(&wd);
>>> +}
>>> +
>>> +static struct work_struct cxl_proto_err_work;
>>> +static DECLARE_WORK(cxl_proto_err_work, cxl_proto_err_work_fn);
>>> +
>>> +int cxl_ras_init(void)
>>> +{
>>> +	if (cxl_cper_register_prot_err_work(&cxl_cper_prot_err_work))
>>> +		pr_err("Failed to initialize CXL RAS CPER\n");
>>> +
>>> +	cxl_register_proto_err_work(&cxl_proto_err_work);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +void cxl_ras_exit(void)
>>> +{
>>> +	cxl_cper_unregister_prot_err_work(&cxl_cper_prot_err_work);
>>> +	cancel_work_sync(&cxl_cper_prot_err_work);
>>> +
>>> +	cxl_unregister_proto_err_work();
>>> +	cancel_work_sync(&cxl_proto_err_work);
>>> +}
>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>> index d775ed37a79b..2c9827690cb3 100644
>>> --- a/drivers/pci/pci.c
>>> +++ b/drivers/pci/pci.c
>>> @@ -2328,6 +2328,7 @@ void pcie_clear_device_status(struct pci_dev *dev)
>>>  	pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &sta);
>>>  	pcie_capability_write_word(dev, PCI_EXP_DEVSTA, sta);
>>>  }
>>> +EXPORT_SYMBOL_NS_GPL(pcie_clear_device_status, "CXL");
>>>  #endif
>>>  
>>>  /**
>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>> index cfa75903dd3f..69ff7c2d214f 100644
>>> --- a/drivers/pci/pci.h
>>> +++ b/drivers/pci/pci.h
>>> @@ -671,16 +671,10 @@ static inline bool pci_dpc_recovered(struct pci_dev *pdev) { return false; }
>>>  void pci_rcec_init(struct pci_dev *dev);
>>>  void pci_rcec_exit(struct pci_dev *dev);
>>>  void pcie_link_rcec(struct pci_dev *rcec);
>>> -void pcie_walk_rcec(struct pci_dev *rcec,
>>> -		    int (*cb)(struct pci_dev *, void *),
>>> -		    void *userdata);
>>>  #else
>>>  static inline void pci_rcec_init(struct pci_dev *dev) { }
>>>  static inline void pci_rcec_exit(struct pci_dev *dev) { }
>>>  static inline void pcie_link_rcec(struct pci_dev *rcec) { }
>>> -static inline void pcie_walk_rcec(struct pci_dev *rcec,
>>> -				  int (*cb)(struct pci_dev *, void *),
>>> -				  void *userdata) { }
>>>  #endif
>>>  
>>>  #ifdef CONFIG_PCI_ATS
>>> @@ -1022,7 +1016,6 @@ void pci_restore_aer_state(struct pci_dev *dev);
>>>  static inline void pci_no_aer(void) { }
>>>  static inline void pci_aer_init(struct pci_dev *d) { }
>>>  static inline void pci_aer_exit(struct pci_dev *d) { }
>>> -static inline void pci_aer_clear_fatal_status(struct pci_dev *dev) { }
>>>  static inline int pci_aer_clear_status(struct pci_dev *dev) { return -EINVAL; }
>>>  static inline int pci_aer_raw_clear_status(struct pci_dev *dev) { return -EINVAL; }
>>>  static inline void pci_save_aer_state(struct pci_dev *dev) { }
>>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>>> index 627d89ccea9c..45abe1622316 100644
>>> --- a/drivers/pci/pcie/aer.c
>>> +++ b/drivers/pci/pcie/aer.c
>>> @@ -288,6 +288,7 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
>>>  	if (status)
>>>  		pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status);
>>>  }
>>> +EXPORT_SYMBOL_GPL(pci_aer_clear_fatal_status);
>>>  
>>>  /**
>>>   * pci_aer_raw_clear_status - Clear AER error registers.
>>> diff --git a/drivers/pci/pcie/rcec.c b/drivers/pci/pcie/rcec.c
>>> index d0bcd141ac9c..fb6cf6449a1d 100644
>>> --- a/drivers/pci/pcie/rcec.c
>>> +++ b/drivers/pci/pcie/rcec.c
>>> @@ -145,6 +145,7 @@ void pcie_walk_rcec(struct pci_dev *rcec, int (*cb)(struct pci_dev *, void *),
>>>  
>>>  	walk_rcec(walk_rcec_helper, &rcec_data);
>>>  }
>>> +EXPORT_SYMBOL_NS_GPL(pcie_walk_rcec, "CXL");
>>>  
>>>  void pci_rcec_init(struct pci_dev *dev)
>>>  {
>>> diff --git a/include/linux/aer.h b/include/linux/aer.h
>>> index f8eb32805957..1f79f0be4bf7 100644
>>> --- a/include/linux/aer.h
>>> +++ b/include/linux/aer.h
>>> @@ -66,12 +66,14 @@ struct cxl_proto_err_work_data {
>>>  
>>>  #if defined(CONFIG_PCIEAER)
>>>  int pci_aer_clear_nonfatal_status(struct pci_dev *dev);
>>> +void pci_aer_clear_fatal_status(struct pci_dev *dev);
>>>  int pcie_aer_is_native(struct pci_dev *dev);
>>>  #else
>>>  static inline int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
>>>  {
>>>  	return -EINVAL;
>>>  }
>>> +static inline void pci_aer_clear_fatal_status(struct pci_dev *dev) { }
>>>  static inline int pcie_aer_is_native(struct pci_dev *dev) { return 0; }
>>>  #endif
>>>  
>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>> index 3dcab36c437f..3407d687459d 100644
>>> --- a/include/linux/pci.h
>>> +++ b/include/linux/pci.h
>>> @@ -1804,6 +1804,9 @@ extern bool pcie_ports_native;
>>>  
>>>  int pcie_set_target_speed(struct pci_dev *port, enum pci_bus_speed speed_req,
>>>  			  bool use_lt);
>>> +void pcie_walk_rcec(struct pci_dev *rcec,
>>> +		    int (*cb)(struct pci_dev *, void *),
>>> +		    void *userdata);
>>>  #else
>>>  #define pcie_ports_disabled	true
>>>  #define pcie_ports_native	false
>>> @@ -1814,8 +1817,15 @@ static inline int pcie_set_target_speed(struct pci_dev *port,
>>>  {
>>>  	return -EOPNOTSUPP;
>>>  }
>>> +
>>> +static inline void pcie_walk_rcec(struct pci_dev *rcec,
>>> +				  int (*cb)(struct pci_dev *, void *),
>>> +				  void *userdata) { }
>>> +
>>>  #endif
>>>  
>>> +void pcie_clear_device_status(struct pci_dev *dev);
>>> +
>>>  #define PCIE_LINK_STATE_L0S		(BIT(0) | BIT(1)) /* Upstr/dwnstr L0s */
>>>  #define PCIE_LINK_STATE_L1		BIT(2)	/* L1 state */
>>>  #define PCIE_LINK_STATE_L1_1		BIT(3)	/* ASPM L1.1 state */
>