Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation

[Florian Eckert <fe@dev.tdt.de>]

On 2023-11-21 16:23, Lee Jones wrote:
> On Mon, 20 Nov 2023, Florian Eckert wrote:
> 
>> 
>> 
>> On 2023-11-17 13:12, Lee Jones wrote:
>> > On Thu, 09 Nov 2023, m.brock@vanmierlo.com wrote:
>> >
>> > > Florian Eckert schreef op 2023-11-09 09:50:
>> > > > The serial tty interface also supports additional input signals, that
>> > > > can also be evaluated within this trigger. This change is adding the
>> > > > following additional input sources, which could be controlled
>> > > > via the '/sys/class/<leds>/' sysfs interface.
>> > > >
>> > > > Explanation:
>> > > > DCE = Data Communication Equipment (Modem)
>> > > > DTE = Data Terminal Equipment (Computer)
>> > > >
>> > > > - cts:
>> > > >   DCE is ready to accept data from the DTE (CTS = Clear To Send). If
>> > > >   the line state is detected, the LED is switched on.
>> > > >   If set to 0 (default), the LED will not evaluate CTS.
>> > > >   If set to 1, the LED will evaluate CTS.
>> > > >
>> > > > - dsr:
>> > > >   DCE is ready to receive and send data (DSR = Data Set Ready). If the
>> > > >   line state is detected, the LED is switched on.
>> > > >   If set to 0 (default), the LED will not evaluate DSR.
>> > > >   If set to 1, the LED will evaluate DSR.
>> > > >
>> > > > - dcd:
>> > > >   DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect).
>> > > >   If the line state is detected, the LED is switched on.
>> > > >   If set to 0 (default), the LED will not evaluate DCD.
>> > > >   If set to 1, the LED will evaluate DCD.
>> > > >
>> > > > - rng:
>> > > >   DCE has detected an incoming ring signal on the telephone line
>> > > >   (RNG = Ring Indicator). If the line state is detected, the LED is
>> > > >   switched on.
>> > > >   If set to 0 (default), the LED will not evaluate RNG.
>> > > >   If set to 1, the LED will evaluate RNG.
>> > > >
>> > > > Also add an invert flag on LED blink, so that the LED blinks in the
>> > > > correct order.
>> > > >
>> > > > * If one off the new enabled input signals are evaluatet as 'enabled',
>> > > >   and data are transmitted, then the LED should first blink 'off' and
>> > > >   then 'on' (invert).
>> > > > * If all the new enabled input signals are evaluatet as 'disabled',
>> > > >   and data are transmitted, then the LED should first blink 'on' and
>> > > >   then 'off'.
>> > > >
>> > > > Signed-off-by: Florian Eckert <fe@dev.tdt.de>
>> > > > ---
>> > > >  .../ABI/testing/sysfs-class-led-trigger-tty   | 40 ++++++++++
>> > > >  drivers/leds/trigger/ledtrig-tty.c            | 77 ++++++++++++++++++-
>> > > >  2 files changed, 116 insertions(+), 1 deletion(-)
>> >
>> > [...]
>> >
>> > > Reviewed-by: Maarten Brock <m.brock@vanmierlo.com>
>> >
>> > Please snip your replies.
>> 
>> Is there anything I can do? Or do I have to do something? Please give 
>> me
>> more detailed instructions
> 
> That instruction wasn't for you.
> 
> This patch is still on my INCOMING list.
> 
> Do you have Greg's blessing yet?

The summary of my v8:

The changes for the tty layer on v5 in 'drivers/tty/tty_io.c' got an
'Acked-by: Greg Kroah-Hartman' [1].
I have always added his 'Acked-by' to the following patch series.
And I did not made changes to this. So I think I have his blessing
for this changes in his maintained tty layer.

The Memory leak patch I send during v7 [2] got a comment
from Greg, that I have to send this also to 
'linux-kernel@vger-kernel.org'
So this should go into the stable branch [3]. This got an
'Reviewed-by: Uwe Kleine-König' [4]. I add this to v8 [5].
So far I don't know if this has already been merged into
the master and then backported into the stable branches?.

For the changes in the ledtrig-tty driver I am still waiting for an
complete 'ACK' or 'NOK' whether I should change something.
I have added all of Greg's requested changes in v5 [6]:
* split this series
* Add the requested change
* Switch the driver to use completion for 'sysfs'

As I understand it, he handed over the review to the LED subsystem team 
[7].

I then added a few more changes that came from Maarten in v7 [8].
I got his 'Reviewed-by: Maarten Brock' for v8 on patch 6/6.

The patches 4/6 and 5/6 of the v8 still waiting for review?

Best regards

Florian

[1] 
https://lore.kernel.org/linux-leds/2023102327-rename-kosher-bf03@gregkh/#t
[2] 
https://lore.kernel.org/linux-leds/2023110629-scenic-rounding-905f@gregkh/
[3] 
https://lore.kernel.org/linux-leds/20231106141205.3376954-1-fe@dev.tdt.de/
[4] 
https://lore.kernel.org/linux-leds/20231106144914.bflq2jxejdxs6zjb@pengutronix.de/
[5] 
https://lore.kernel.org/linux-leds/20231109085038.371977-1-fe@dev.tdt.de/T/#m1f0c4680749812f1a933667128f73995efe66bca
[6] 
https://lore.kernel.org/linux-leds/2023102341-jogger-matching-dded@gregkh/
[7] 
https://lore.kernel.org/linux-leds/2023102333-skewer-reclining-8d04@gregkh/
[8] 
https://lore.kernel.org/linux-leds/bc94f31e965be6f640c286f8c8a2cf38@vanmierlo.com/
[9] 
https://lore.kernel.org/linux-leds/39e7c892299c74821b1105a0967063ca@vanmierlo.com/