Re: [PATCH V2 1/4] gpio: sprd: In the sleep state, the eic debounce clk must be forced open

[Baolin Wang <baolin.wang@linux.alibaba.com>]

On 9/21/2023 5:00 PM, Wenhua Lin wrote:
> In the sleep state, Eic debounce has no clock and the clk of
> debounce needs to be forced open, so that eic can wake up normally.
> 
> Fixes: 2788938b7946 ("gpio: eic-sprd: Make the irqchip immutable")

Are you sure this is the right Fixes tag? This commit did not change EIC 
debounce logics.

The changes look good to me.

> Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
> ---
>   drivers/gpio/gpio-eic-sprd.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> index 84352a6f4973..bfa8a4c7515a 100644
> --- a/drivers/gpio/gpio-eic-sprd.c
> +++ b/drivers/gpio/gpio-eic-sprd.c
> @@ -23,6 +23,7 @@
>   #define SPRD_EIC_DBNC_IC		0x24
>   #define SPRD_EIC_DBNC_TRIG		0x28
>   #define SPRD_EIC_DBNC_CTRL0		0x40
> +#define SPRD_EIC_DBNC_FORCE_CLK		0x8000
>   
>   #define SPRD_EIC_LATCH_INTEN		0x0
>   #define SPRD_EIC_LATCH_INTRAW		0x4
> @@ -214,6 +215,7 @@ static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
>   	u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
>   
>   	value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
> +	value |= SPRD_EIC_DBNC_FORCE_CLK;
>   	writel_relaxed(value, base + reg);
>   
>   	return 0;