From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751996AbdAMP2F (ORCPT ); Fri, 13 Jan 2017 10:28:05 -0500 Received: from mail-pf0-f195.google.com ([209.85.192.195]:35314 "EHLO mail-pf0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751528AbdAMP2E (ORCPT ); Fri, 13 Jan 2017 10:28:04 -0500 Subject: Re: [PATCH v2 6/6] arm: dts: mt2701: Add thermal device node. To: Erin Lo References: <1484296978-18572-1-git-send-email-erin.lo@mediatek.com> <1484296978-18572-7-git-send-email-erin.lo@mediatek.com> Cc: srv_heupstream@mediatek.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, Dawei Chien From: Matthias Brugger Message-ID: Date: Fri, 13 Jan 2017 16:27:57 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.6.0 MIME-Version: 1.0 In-Reply-To: <1484296978-18572-7-git-send-email-erin.lo@mediatek.com> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 13/01/17 09:42, Erin Lo wrote: > From: Dawei Chien > > Add thermal controller device nodes for MT2701. > > Signed-off-by: Dawei Chien > Signed-off-by: Erin Lo > --- > arch/arm/boot/dts/mt2701.dtsi | 43 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi > index 3847f70..c43d5f8 100644 > --- a/arch/arm/boot/dts/mt2701.dtsi > +++ b/arch/arm/boot/dts/mt2701.dtsi > @@ -89,6 +89,36 @@ > clock-output-names = "rtc32k"; > }; > > + thermal-zones { > + cpu_thermal: cpu_thermal { > + polling-delay-passive = <1000>; /* milliseconds */ > + polling-delay = <1000>; /* milliseconds */ > + > + thermal-sensors = <&thermal 0>; > + sustainable-power = <1000>; > + > + trips { > + threshold: trip-point@0 { > + temperature = <68000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + target: trip-point@1 { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_crit: cpu_crit@0 { > + temperature = <115000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv7-timer"; > interrupt-parent = <&gic>; > @@ -270,6 +300,19 @@ > status = "disabled"; > }; > > + thermal: thermal@1100b000 { > + #thermal-sensor-cells = <0>; > + compatible = "mediatek,mt2701-thermal"; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = ; > + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; > + clock-names = "therm", "auxadc"; > + resets = <&pericfg 0x10>; should be MT2701_PERI_AUXADC_SW_RST, right? > + reset-names = "therm"; > + mediatek,auxadc = <&auxadc>; > + mediatek,apmixedsys = <&apmixedsys>; > + }; > + > nandc: nfi@1100d000 { > compatible = "mediatek,mt2701-nfc"; > reg = <0 0x1100d000 0 0x1000>; >