[PATCH] clk: tegra20: fix gcc-7 constant overflow warning

[PATCH] clk: tegra20: fix gcc-7 constant overflow warning

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Older gcc versions get confused by comparing a u32 value to a negative
constant in a switch()/case block:

drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq':
drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant
  case OSC_CTRL_OSC_FREQ_12MHZ:
  ^~~~
drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant
  case OSC_CTRL_OSC_FREQ_26MHZ:

Make the constants unsigned instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/clk/tegra/clk-tegra20.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 422d78247553..dcacc5064d33 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -21,24 +21,24 @@
 #define MISC_CLK_ENB 0x48
 
 #define OSC_CTRL 0x50
-#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
-#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30)
-#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30)
-#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30)
-#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_CTRL_PLL_REF_DIV_MASK (3<<28)
-#define OSC_CTRL_PLL_REF_DIV_1		(0<<28)
-#define OSC_CTRL_PLL_REF_DIV_2		(1<<28)
-#define OSC_CTRL_PLL_REF_DIV_4		(2<<28)
+#define OSC_CTRL_OSC_FREQ_MASK (3u<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0u<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (1u<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ (2u<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ (3u<<30)
+#define OSC_CTRL_MASK (0x3f2u | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK	(3u<<28)
+#define OSC_CTRL_PLL_REF_DIV_1		(0u<<28)
+#define OSC_CTRL_PLL_REF_DIV_2		(1u<<28)
+#define OSC_CTRL_PLL_REF_DIV_4		(2u<<28)
 
 #define OSC_FREQ_DET 0x58
-#define OSC_FREQ_DET_TRIG (1<<31)
+#define OSC_FREQ_DET_TRIG (1u<<31)
 
 #define OSC_FREQ_DET_STATUS 0x5c
-#define OSC_FREQ_DET_BUSY (1<<31)
-#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+#define OSC_FREQ_DET_BUSYu (1<<31)
+#define OSC_FREQ_DET_CNT_MASK 0xFFFFu
 
 #define TEGRA20_CLK_PERIPH_BANKS	3
 
-- 
2.39.2

Re: [PATCH] clk: tegra20: fix gcc-7 constant overflow warning

[Stephen Boyd]

Quoting Arnd Bergmann (2023-02-27 00:59:10)
> From: Arnd Bergmann <arnd@arndb.de>
> 
> Older gcc versions get confused by comparing a u32 value to a negative
> constant in a switch()/case block:
> 
> drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq':
> drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant
>   case OSC_CTRL_OSC_FREQ_12MHZ:
>   ^~~~
> drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant
>   case OSC_CTRL_OSC_FREQ_26MHZ:
> 
> Make the constants unsigned instead.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---

Applied to clk-next