From: dth@ncc1701.cistron.net (Danny ter Haar)
To: linux-kernel@vger.kernel.org
Subject: problems with SATA: 2.6.7 working, -bk12/13/-mm4 not
Date: Wed, 30 Jun 2004 23:01:47 +0000 (UTC) [thread overview]
Message-ID: <cbvgor$lgp$1@news.cistron.nl> (raw)
1U 19" server supermicro with ICH5 & P4.
runs 2.6.7 vanilla without problems.
tried -bk12/-bk13/-mm4 which won't work
Machine is on serial console and captures output looks like
this:
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2595.0172 MHz.
..... host bus clock speed is 199.0628 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 *12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
testing the IO APIC.......................
.................................... done.
Starting balanced_irq
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
SELinux: Registering netfilter hooks
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
netconsole: not configured, aborting
ata_piix: combined mode detected
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata1: dev 1 ATA, max UDMA/100, 488397168 sectors: lba48
ata1: dev 0 configured for UDMA/100
ata1: dev 1 configured for UDMA/100
scsi0 : ata_piix
Using anticipatory io scheduler
Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0:<3>ata1: command 0x25 timeout, stat 0xd0 hos4
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 00 00 00 00 00 00 08
Current sda: sense key Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 0
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
working plain 2.6.7 shows:
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host0/bus0/target1/lun0: p1
Machine is running debian.
dotconfig files at http://dth.net/supermicro/
Recent patches have done quite a lot with SATA i suppose ?!
Just posting with intention to let people know that upgrading
to the latest/greatest isn't currently working for me ;-)
Danny
ata1: dev 1 ATA, max UDMA/100, 488397168 sectors: lba48
ata1: dev 0 configured for UDMA/100
ata1: dev 1 configured for UDMA/100
scsi0 : ata_piix
Using anticipatory io scheduler
Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: HDS722525VLSA80 Rev: V36O
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0:<3>ata1: command 0x25 timeout, stat 0xd0 hos4
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 00 00 00 00 00 00 08
Current sda: sense key Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 0
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
ATA: abnormal status 0xD0 on port 0x1F7
--
"If Microsoft had been the innovative company that it calls itself, it
would have taken the opportunity to take a radical leap beyond the Mac,
instead of producing a feeble, me-too implementation." - Douglas Adams -
next reply other threads:[~2004-06-30 23:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-30 23:01 Danny ter Haar [this message]
2004-06-30 23:17 ` problems with SATA: 2.6.7 working, -bk12/13/-mm4 not Jeff Garzik
2004-07-01 3:52 ` Danny ter Haar
2004-07-01 8:54 ` Danny ter Haar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='cbvgor$lgp$1@news.cistron.nl' \
--to=dth@ncc1701.cistron.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox