From: Aryix <aryix@softhome.net>
To: linux-kernel@vger.kernel.org
Subject: another seagate for the black-list?
Date: Thu, 12 Dec 2002 07:56:07 -0300 [thread overview]
Message-ID: <courier.3DF9A5BB.00000AD0@softhome.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 291 bytes --]
hdparm say: max udma capable 2
the disk is udma5
/root/.gnupg/pubring.gpg
------------------------
pub 1024D/BE8E00BE 2002-12-06 Aryix Berius (nothing.........) <aryix@softhome.net>
Key fingerprint = 249D C5BC 8B9A C46A C7F4 397D 2A6D 9FF6 BE8E 00BE
sub 2048g/C1C6CB29 2002-12-06
[-- Attachment #2: sea --]
[-- Type: application/octet-stream, Size: 20262 bytes --]
kernel-2.4.20
hdparm-v5.2
hdparm -iI /dev/hdc
/dev/hdc:
Model=ST36421A, FwRev=6.01, SerialNo=5BE0EC1N
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=13330/15/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=13330/15/63, CurSects=12596850, LBA=yes, LBAsects=12596850
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4
ATA device, with non-removable media
Model Number: ST36421A
Serial Number: 5BE0EC1N
Firmware Revision: 6.01
Standards:
Supported: 4 3 2 1
Likely used: 5
Configuration:
Logical max current
cylinders 13330 13330
heads 15 15
sectors/track 63 63
--
CHS current addressable sectors: 12596850
LBA user addressable sectors: 12596850
device size with M = 1024*1024: 6150 MBytes
device size with M = 1000*1000: 6449 MBytes (6 GB)
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 256.0kB bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 *udma3 udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
* Security Mode feature set
* SMART feature set
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- below Vih
Device num = 1
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at da000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [KX133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 21)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 20)
Subsystem: VIA Technologies, Inc.: Unknown device 4511
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 12
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [disabled] [size=256]
Region 1: Memory at dc001000 (32-bit, non-prefetchable) [size=4K]
01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=<none>
ksymoops -d
DEBUG (convert_uname): /lib/modules/*r/ in
DEBUG (convert_uname): /lib/modules/2.4.20/ out
DEBUG (convert_uname): /boot/System.map-*r in
DEBUG (convert_uname): /boot/System.map-2.4.20 out
ksymoops 2.4.5 on i686 2.4.20. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.20/ (default)
-m /boot/System.map-2.4.20 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
DEBUG (main): level 1
DEBUG (read_env): default KSYMOOPS_NM=/usr/bin/nm
DEBUG (read_env): default KSYMOOPS_FIND=/usr/bin/find
DEBUG (read_env): default KSYMOOPS_OBJDUMP=/usr/bin/objdump
DEBUG (re_compile): '^([0-9a-fA-F]{4,}) +([^ ]) +([^ ]+)( +\[([^ ]+)\])?$' 5 sub expression(s)
DEBUG (re_compile): '^ *\[*<([0-9a-fA-F]{4,})>\]* *' 1 sub expression(s)
DEBUG (re_compile): '^ *<\[([0-9a-fA-F]{4,})\]> *' 1 sub expression(s)
DEBUG (re_compile): '^ *([0-9a-fA-F]{4,}) *' 1 sub expression(s)
DEBUG (read_ksyms): /proc/ksyms
DEBUG (re_compile): '^([0-9a-fA-F]{4,}) +([^ ]+)( +\[([^ ]+)\])?$' 4 sub expression(s)
DEBUG (re_compile): '^(.*)_R.*[0-9a-fA-F]{8,}$' 1 sub expression(s)
DEBUG (re_compile): '^(__insmod_.*)(_O(.*)_M([0-9a-fA-F]+)_V(-?[0-9]+)|_S(.*)_L([0-9]+))' 7 sub expression(s)
DEBUG (ss_sort_na): ipx
DEBUG (ss_sort_na): ext3
DEBUG (ss_sort_na): jbd
DEBUG (ss_sort_na): NVdriver
DEBUG (ss_sort_na): sg
DEBUG (ss_sort_na): 8139too
DEBUG (ss_sort_na): mii
DEBUG (ss_sort_na): via82cxxx_audio
DEBUG (ss_sort_na): uart401
DEBUG (ss_sort_na): ac97_codec
DEBUG (ss_sort_na): sound
DEBUG (ss_sort_na): sd_mod
DEBUG (ss_sort_na): sr_mod
DEBUG (ss_sort_na): aic7xxx
DEBUG (ss_sort_na): scsi_mod
DEBUG (ss_sort_na): ksyms_base
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/net/ipx/ipx.o for ipx
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/fs/ext3/ext3.o for ext3
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/fs/jbd/jbd.o for jbd
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/video/NVdriver for NVdriver
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/scsi/sg.o for sg
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/net/8139too.o for 8139too
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/net/mii.o for mii
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/sound/via82cxxx_audio.o for via82cxxx_audio
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/sound/uart401.o for uart401
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/sound/ac97_codec.o for ac97_codec
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/sound/sound.o for sound
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/scsi/sd_mod.o for sd_mod
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/scsi/sr_mod.o for sr_mod
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/scsi/aic7xxx/aic7xxx.o for aic7xxx
DEBUG (expand_objects): using /lib/modules/2.4.20/kernel/drivers/scsi/scsi_mod.o for scsi_mod
DEBUG (expand_objects): all ksyms modules map to specific object files
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/net/ipx/ipx.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/fs/ext3/ext3.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/fs/jbd/jbd.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/video/NVdriver
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/scsi/sg.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/net/8139too.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/net/mii.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/sound/via82cxxx_audio.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/sound/uart401.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/sound/ac97_codec.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/sound/sound.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/scsi/sd_mod.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/scsi/sr_mod.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/scsi/aic7xxx/aic7xxx.o
DEBUG (ss_sort_na): /lib/modules/2.4.20/kernel/drivers/scsi/scsi_mod.o
DEBUG (read_lsmod): /proc/modules
DEBUG (re_compile): '^ *([^ ]+) *([^ ]+) *([^ ]+) *(.*)$' 4 sub expression(s)
DEBUG (ss_sort_na): lsmod
DEBUG (read_system_map): /boot/System.map-2.4.20
DEBUG (ss_sort_na): System.map
DEBUG (merge_maps):
DEBUG (ss_sort_na): System.map
DEBUG (ss_sort_na): Version_
DEBUG (compare_Version): Version 2.4.20
DEBUG (map_ksyms_to_modules): ksyms ipx matches to /lib/modules/2.4.20/kernel/net/ipx/ipx.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms ext3 matches to /lib/modules/2.4.20/kernel/fs/ext3/ext3.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms jbd matches to /lib/modules/2.4.20/kernel/fs/jbd/jbd.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms NVdriver matches to /lib/modules/2.4.20/kernel/drivers/video/NVdriver based on modutils assist
Warning (compare_maps): mismatch on symbol __nvsym03120 , NVdriver says d0a4f3a0, /lib/modules/2.4.20/kernel/drivers/video/NVdriver says d0975000. Ignoring /lib/modules/2.4.20/kernel/drivers/video/NVdriver entry
DEBUG (map_ksyms_to_modules): ksyms sg matches to /lib/modules/2.4.20/kernel/drivers/scsi/sg.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms 8139too matches to /lib/modules/2.4.20/kernel/drivers/net/8139too.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms mii matches to /lib/modules/2.4.20/kernel/drivers/net/mii.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms via82cxxx_audio matches to /lib/modules/2.4.20/kernel/drivers/sound/via82cxxx_audio.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms uart401 matches to /lib/modules/2.4.20/kernel/drivers/sound/uart401.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms ac97_codec matches to /lib/modules/2.4.20/kernel/drivers/sound/ac97_codec.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms sound matches to /lib/modules/2.4.20/kernel/drivers/sound/sound.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms sd_mod matches to /lib/modules/2.4.20/kernel/drivers/scsi/sd_mod.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms sr_mod matches to /lib/modules/2.4.20/kernel/drivers/scsi/sr_mod.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms aic7xxx matches to /lib/modules/2.4.20/kernel/drivers/scsi/aic7xxx/aic7xxx.o based on modutils assist
DEBUG (map_ksyms_to_modules): ksyms scsi_mod matches to /lib/modules/2.4.20/kernel/drivers/scsi/scsi_mod.o based on modutils assist
DEBUG (ss_sort_atn): merged
DEBUG (ss_sort_atn): merged
DEBUG (ss_sort_atn): merged
Reading Oops report from the terminal
cat /proc/ide/hdc/*
256
12596850
ide-disk version 1.12
physical 13330/15/63
logical 784/255/63
0c5a 3412 0000 000f 0000 0000 003f 0000
0000 0000 3542 4530 4543 314e 2020 2020
2020 2020 2020 2020 0000 0200 0004 362e
3031 2020 2020 5354 3336 3432 3141 2020
2020 2020 2020 2020 2020 2020 2020 2020
2020 2020 2020 2020 2020 2020 2020 8010
0000 2f00 0000 0200 0200 0007 3412 000f
003f 3672 00c0 0110 3672 00c0 0000 0007
0003 0078 0078 00f0 0078 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
001e 0000 346b 4001 4000 346b 0001 4000
081f 0000 0000 0000 0000 4000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0001 6636 00c1 3672 00c0 2e30 0002 0000
0000 0000 0001 0001 0801 0101 0401 0001
3c24 0001 0001 3cb4 0100 0100 0120 0000
0001 1300 0000 9fe7 0014 0a0c 00e2 9020
0048 0700 0f13 8005 f7ff 80ff 0010 8000
0120 0040 ffff 0001 1901 1e24 0000 0005
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
3850 3932 3330 2d30 3032 2e30 3100 0000
disk
ST36421A
name value min max mode
---- ----- --- --- ----
acoustic 0 0 254 rw
address 0 0 2 rw
bios_cyl 784 0 65535 rw
bios_head 255 0 255 rw
bios_sect 63 0 63 rw
breada_readahead 8 0 255 rw
bswap 0 0 1 r
current_speed 67 0 69 rw
failures 0 0 65535 rw
file_readahead 124 0 16384 rw
ide_scsi 0 0 1 rw
init_speed 12 0 69 rw
io_32bit 1 0 3 rw
keepsettings 0 0 1 rw
lun 0 0 7 rw
max_failures 1 0 65535 rw
max_kb_per_request 128 1 255 rw
multcount 16 0 16 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
number 2 0 3 rw
pio_mode write-only 0 255 w
slow 0 0 1 rw
unmaskirq 1 0 1 rw
using_dma 1 0 1 rw
wcache 0 0 1 rw
0009 1901 0000 0000 0000 0000 0000 0003
0000 0000 0000 0000 0000 0004 0000 0000
0000 0000 0000 2405 0000 0000 0000 0000
0000 1e07 0000 0000 0000 0000 0000 000a
0000 0000 0000 0000 0000 000c 0000 0000
0000 0000 0000 00c5 0000 0000 0000 0000
0000 00c6 0000 0000 0000 0000 0000 00c7
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 2000
0009 0b01 6400 80fd 000c 0000 0000 0603
6000 0060 0000 0000 0000 1204 6300 b763
0006 0000 0000 1305 5100 cb51 0000 0000
0000 0b07 3200 bd28 eb3a eb00 0002 120a
6400 0045 0000 0000 0000 120c 6200 5b62
0008 0000 0000 12c5 5800 0058 0000 0000
0000 12c6 5800 0058 0000 0000 0000 0ac7
c800 3bc4 0003 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0002 0960 1300
0002 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0404 0404 0404 0404 0004
0000 0000 0000 0100 2dfd 00a4 0101 0000
ba94 0023 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 4200
next reply other threads:[~2002-12-13 9:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-12 10:56 Aryix [this message]
2002-12-13 10:25 ` another seagate for the black-list? Måns Rullgård
[not found] <courier.3DFF30A8.000033A8@softhome.net>
2002-12-17 15:52 ` Manish Lachwani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=courier.3DF9A5BB.00000AD0@softhome.net \
--to=aryix@softhome.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox