[PATCH v2 00/10] Getting rid of get_unused_fd_flags()

[PATCH v2 00/10] Getting rid of get_unused_fd_flags()

[Yann Droneaud]

Hi,

Macro get_unused_fd() is a shortcut to call function get_unused_fd_flags(),
to allocate a file descriptor.

The macro use 0 as flags, so the file descriptor is created
without O_CLOEXEC flag.

This can be seen as an unsafe default eg. in most case O_CLOEXEC
must be used to not leak file descriptor across exec().

Newer kernel code should use anon_inode_getfd() or get_unused_fd_flags()
with flags provided by userspace. If flags cannot be given by userspace,
O_CLOEXEC must be the default flag.

Using O_CLOEXEC by default allows userspace to choose, without race,
if the file descriptor is going to be inherited across exec().

They are two ways to achieve this:

- makes get_unused_fd() use O_CLOEXEC by default

  It's difficult to get it right: every code using of get_unused_fd()
  must take this change into account and be fixed as soon as
  macro get_unused_fd() do the switch. Non updated code will have
  unexpected behavor and it's likely going to break API contract.

- remove get_unused_fd()

  It's going to break some out of tree, not yet upstream kernel code,
  but it's easy to notice and fix. Anyway, newer code should use
  anon_inode_getfd() or get_unused_fd_flags().

The latter option was choosen to ensure no unexpected behavor
for out of tree, not yet upstream code. Removing the macro is the safest
choice: it's better to break build than trying to make get_unused_fd()
use O_CLOEXEC by default and get all user of get_unused_fd() update.

Additionnaly, removing the macro is not going to break modules ABI.

In linux-next tag 20130815, they're currently:

- 19 calls to get_unused_fd_flags()     (+4)
     not counting get_unused_fd() and anon_inode_getfd()
- 10 calls to get_unused_fd()           (-4)
- 11 calls to anon_inode_getfd()        (0)

The following patchset try to convert all calls to get_unused_fd()
to get_unused_fd_flags(0) before removing get_unused_fd() macro.

Without get_unused_fd() macro, more subsystems are likely to use
anon_inode_getfd() and be teached to provide an API that let userspace
choose the opening flags of the file descriptor.

Changes from v1 <http://lkml.kernel.org/r/cover.1372777600.git.ydroneaud@opteya.com>:

- explicitly added subsystem maintainers as mail recepients.

- infiniband: use get_unused_fd_flags(0) instead of get_unused_fd()
  DROPPED: subsystem maintainer applied another patch using
           get_unused_fd_flags(O_CLOEXEC) as suggested.

- android/sw_sync: use get_unused_fd_flags(0) instead of get_unused_fd()
  MODIFIED: use get_unused_fd_flags(O_CLOEXEC) as suggested by
  <http://lkml.kernel.org/r/CACSP8SjXGMk2_kX_+RgzqqQwqKernvF1Wt3K5tw991W5dfAnCA@mail.gmail.com>

- android/sync: use get_unused_fd_flags(0) instead of get_unused_fd()
  MODIFIED: use get_unused_fd_flags(O_CLOEXEC) as suggested by
  <http://lkml.kernel.org/r/CACSP8SjZcpcpEtQHzcGYhf-MP7QGo0XpN7-uN7rmD=vNtopG=w@mail.gmail.com>

- xfs: use get_unused_fd_flags(0) instead of get_unused_fd()
  DROPPED: applied asis by subsystem maintainer.

- sctp: use get_unused_fd_flags(0) instead of get_unused_fd()
  DROPPED: applied asis by subsystem maintainer.

Yann Droneaud (10):
  ia64: use get_unused_fd_flags(0) instead of get_unused_fd()
  ppc/cell: use get_unused_fd_flags(0) instead of get_unused_fd()
  android/sw_sync: use get_unused_fd_flags(O_CLOEXEC) instead of
    get_unused_fd()
  android/sync: use get_unused_fd_flags(O_CLOEXEC) instead of
    get_unused_fd()
  vfio: use get_unused_fd_flags(0) instead of get_unused_fd()
  binfmt_misc: use get_unused_fd_flags(0) instead of get_unused_fd()
  file: use get_unused_fd_flags(0) instead of get_unused_fd()
  fanotify: use get_unused_fd_flags(0) instead of get_unused_fd()
  events: use get_unused_fd_flags(0) instead of get_unused_fd()
  file: remove get_unused_fd()

 arch/ia64/kernel/perfmon.c                | 2 +-
 arch/powerpc/platforms/cell/spufs/inode.c | 4 ++--
 drivers/staging/android/sw_sync.c         | 2 +-
 drivers/staging/android/sync.c            | 2 +-
 drivers/vfio/vfio.c                       | 2 +-
 fs/binfmt_misc.c                          | 2 +-
 fs/file.c                                 | 2 +-
 fs/notify/fanotify/fanotify_user.c        | 2 +-
 include/linux/file.h                      | 1 -
 kernel/events/core.c                      | 2 +-
 10 files changed, 10 insertions(+), 11 deletions(-)

-- 
1.8.3.1

[PATCH v2 01/10] ia64: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com
---
 arch/ia64/kernel/perfmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 5a9ff1c..64757c1 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2668,7 +2668,7 @@ pfm_context_create(pfm_context_t *ctx, void *arg, int count, struct pt_regs *reg
 
 	ret = -ENOMEM;
 
-	fd = get_unused_fd();
+	fd = get_unused_fd_flags(0);
 	if (fd < 0)
 		return fd;
 
-- 
1.8.3.1

[PATCH v2 02/10] ppc/cell: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 arch/powerpc/platforms/cell/spufs/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index f390042..88df441 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -301,7 +301,7 @@ static int spufs_context_open(struct path *path)
 	int ret;
 	struct file *filp;
 
-	ret = get_unused_fd();
+	ret = get_unused_fd_flags(0);
 	if (ret < 0)
 		return ret;
 
@@ -518,7 +518,7 @@ static int spufs_gang_open(struct path *path)
 	int ret;
 	struct file *filp;
 
-	ret = get_unused_fd();
+	ret = get_unused_fd_flags(0);
 	if (ret < 0)
 		return ret;
 
-- 
1.8.3.1

[PATCH v2 03/10] android/sw_sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with call to
get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling.


Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Colin Cross <ccross@google.com>
Link: http://lkml.kernel.org/r/CACSP8SjZcpcpEtQHzcGYhf-MP7QGo0XpN7-uN7rmD=vNtopG=w@mail.gmail.com
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 drivers/staging/android/sw_sync.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/android/sw_sync.c b/drivers/staging/android/sw_sync.c
index 765c757..f24493a 100644
--- a/drivers/staging/android/sw_sync.c
+++ b/drivers/staging/android/sw_sync.c
@@ -163,7 +163,7 @@ static int sw_sync_release(struct inode *inode, struct file *file)
 static long sw_sync_ioctl_create_fence(struct sw_sync_timeline *obj,
 				       unsigned long arg)
 {
-	int fd = get_unused_fd();
+	int fd = get_unused_fd_flags(O_CLOEXEC);
 	int err;
 	struct sync_pt *pt;
 	struct sync_fence *fence;
-- 
1.8.3.1

[PATCH v2 04/10] android/sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with call to
get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Colin Cross <ccross@google.com>
Link: http://lkml.kernel.org/r/CACSP8SjXGMk2_kX_+RgzqqQwqKernvF1Wt3K5tw991W5dfAnCA@mail.gmail.com
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 drivers/staging/android/sync.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/android/sync.c b/drivers/staging/android/sync.c
index 2996077..38e5d3b 100644
--- a/drivers/staging/android/sync.c
+++ b/drivers/staging/android/sync.c
@@ -697,7 +697,7 @@ static long sync_fence_ioctl_wait(struct sync_fence *fence, unsigned long arg)
 
 static long sync_fence_ioctl_merge(struct sync_fence *fence, unsigned long arg)
 {
-	int fd = get_unused_fd();
+	int fd = get_unused_fd_flags(O_CLOEXEC);
 	int err;
 	struct sync_fence *fence2, *fence3;
 	struct sync_merge_data data;
-- 
1.8.3.1

[PATCH v2 05/10] vfio: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 drivers/vfio/vfio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index d3cb342..75c16cc 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -1109,7 +1109,7 @@ static int vfio_group_get_device_fd(struct vfio_group *group, char *buf)
 		 * We can't use anon_inode_getfd() because we need to modify
 		 * the f_mode flags directly to allow more than just ioctls
 		 */
-		ret = get_unused_fd();
+		ret = get_unused_fd_flags(0);
 		if (ret < 0) {
 			device->ops->release(device->device_data);
 			break;
-- 
1.8.3.1

Re: [PATCH v2 05/10] vfio: use get_unused_fd_flags(0) instead of get_unused_fd()

[Alex Williamson]

On Thu, 2013-08-15 at 15:10 +0200, Yann Droneaud wrote:
> Macro get_unused_fd() is used to allocate a file descriptor with
> default flags. Those default flags (0) can be "unsafe":
> O_CLOEXEC must be used by default to not leak file descriptor
> across exec().
> 
> Instead of macro get_unused_fd(), functions anon_inode_getfd()
> or get_unused_fd_flags() should be used with flags given by userspace.
> If not possible, flags should be set to O_CLOEXEC to provide userspace
> with a default safe behavor.
> 
> In a further patch, get_unused_fd() will be removed so that
> new code start using anon_inode_getfd() or get_unused_fd_flags()
> with correct flags.
> 
> This patch replaces calls to get_unused_fd() with equivalent call to
> get_unused_fd_flags(0) to preserve current behavor for existing code.
> 
> The hard coded flag value (0) should be reviewed on a per-subsystem basis,
> and, if possible, set to O_CLOEXEC.
> 
> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
> Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com
> 
> ---
>  drivers/vfio/vfio.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
> index d3cb342..75c16cc 100644
> --- a/drivers/vfio/vfio.c
> +++ b/drivers/vfio/vfio.c
> @@ -1109,7 +1109,7 @@ static int vfio_group_get_device_fd(struct vfio_group *group, char *buf)
>  		 * We can't use anon_inode_getfd() because we need to modify
>  		 * the f_mode flags directly to allow more than just ioctls
>  		 */
> -		ret = get_unused_fd();
> +		ret = get_unused_fd_flags(0);
>  		if (ret < 0) {
>  			device->ops->release(device->device_data);
>  			break;

I don't see any reason why we shouldn't be adding O_CLOEXEC here.  If
anyone disagrees, please speak up.  I'll include this in my next tree
and post a follow-on patch to replace 0 with O_CLOEXEC.  Thanks,

Alex

[PATCH v2 06/10] binfmt_misc: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 fs/binfmt_misc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 1c740e1..052f6dc 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -138,7 +138,7 @@ static int load_misc_binary(struct linux_binprm *bprm)
 		/* if the binary should be opened on behalf of the
 		 * interpreter than keep it open and assign descriptor
 		 * to it */
- 		fd_binary = get_unused_fd();
+		fd_binary = get_unused_fd_flags(0);
  		if (fd_binary < 0) {
  			retval = fd_binary;
  			goto _ret;
-- 
1.8.3.1

[PATCH v2 07/10] file: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 fs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/file.c b/fs/file.c
index 4a78f98..1420d28 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -897,7 +897,7 @@ SYSCALL_DEFINE1(dup, unsigned int, fildes)
 	struct file *file = fget_raw(fildes);
 
 	if (file) {
-		ret = get_unused_fd();
+		ret = get_unused_fd_flags(0);
 		if (ret >= 0)
 			fd_install(ret, file);
 		else
-- 
1.8.3.1

[PATCH v2 08/10] fanotify: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 fs/notify/fanotify/fanotify_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index e44cb64..644b9a7 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -69,7 +69,7 @@ static int create_fd(struct fsnotify_group *group,
 
 	pr_debug("%s: group=%p event=%p\n", __func__, group, event);
 
-	client_fd = get_unused_fd();
+	client_fd = get_unused_fd_flags(0);
 	if (client_fd < 0)
 		return client_fd;
 
-- 
1.8.3.1

[PATCH v2 09/10] events: use get_unused_fd_flags(0) instead of get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index f25ce6d..a224a14 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6891,7 +6891,7 @@ SYSCALL_DEFINE5(perf_event_open,
 	if ((flags & PERF_FLAG_PID_CGROUP) && (pid == -1 || cpu == -1))
 		return -EINVAL;
 
-	event_fd = get_unused_fd();
+	event_fd = get_unused_fd_flags(0);
 	if (event_fd < 0)
 		return event_fd;
 
-- 
1.8.3.1

[PATCH v2 10/10] file: remove get_unused_fd()

[Yann Droneaud]

Macro get_unused_fd() allocates a file descriptor without O_CLOEXEC flag.

This can be seen as an unsafe default: in most case O_CLOEXEC
must be used to not leak file descriptor across exec().

Using O_CLOEXEC by default allows userspace to choose, without race,
if the file descriptor is going to be inherited across exec().

This patch removes get_unused_fd() so that newer kernel code use
anon_inode_getfd() or get_unused_fd_flags() with flags provided
by userspace. If flags cannot be given by userspace,
O_CLOEXEC must be the default flag.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com

---
 include/linux/file.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/linux/file.h b/include/linux/file.h
index cbacf4f..8666002 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -63,7 +63,6 @@ extern void set_close_on_exec(unsigned int fd, int flag);
 extern bool get_close_on_exec(unsigned int fd);
 extern void put_filp(struct file *);
 extern int get_unused_fd_flags(unsigned flags);
-#define get_unused_fd() get_unused_fd_flags(0)
 extern void put_unused_fd(unsigned int fd);
 
 extern void fd_install(unsigned int fd, struct file *file);
-- 
1.8.3.1