From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759326AbcG0Ffq (ORCPT ); Wed, 27 Jul 2016 01:35:46 -0400 Received: from 216-12-86-13.cv.mvl.ntelos.net ([216.12.86.13]:59231 "EHLO brightrain.aerifal.cx" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757052AbcG0FfN (ORCPT ); Wed, 27 Jul 2016 01:35:13 -0400 Message-Id: From: Rich Felker Subject: [PATCH v4 0/2] J-Core timer support To: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org, devicetree@vger.kernel.org Cc: Mark Rutland , Rob Herring , Daniel Lezcano , Thomas Gleixner Date: Wed, 27 Jul 2016 05:35:09 +0000 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This driver is used with the J2, an open-source VHDL reimplementation of SH-2. I've split this out from the main J-Core support patches going upstream through my own linux-sh tree. Changes since the v3 are mainly cleanup/simplification, inclusion of sched_clock support based on suggestions by Daniel Lezcano, and reworking the DT bindings to use separate reg ranges per cpu rather than cpu-offset for greater flexibility. Rich Rich Felker (2): of: add J-Core timer bindings clocksource: add J-Core timer/clocksource driver .../devicetree/bindings/timer/jcore,pit.txt | 25 ++ drivers/clocksource/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/jcore-pit.c | 277 +++++++++++++++++++++ 4 files changed, 311 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/jcore,pit.txt create mode 100644 drivers/clocksource/jcore-pit.c -- 2.8.1